Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair for Denton Homeowners
A gate that won’t open is a locked door between you and your own driveway, and in Denton it usually fails at the worst possible moment, right when you’re late for work or trying to get home after dark. Gate repair in Denton typically costs $150 to $600 depending on whether we’re dealing with a hinge, a circuit board, a bent post, or a motor that’s given up, and most repairs are completed the same day we arrive. Hal Gatewood has been fixing gates across Denton County since 2001, and he still answers the phone himself at (940) 394-8744 when you call. The name is on the shop, and the shop is down the road, which means if it’s not done right, you know exactly where to find him.
We repair what other companies want to replace. A sagging gate doesn’t need a whole new frame. A wiring short doesn’t need a new motor. And in Denton’s summer heat and winter freezes, gates take a beating that only shows up with time. We weld on site, we stock parts for nine major brands, and every job carries our 90-Day Done Right Promise in writing.
Key Takeaways
- Most Denton gate repairs run $150 to $600, quoted and agreed before we start
- A live person answers our phone 24/7, not a voicemail or a call center three states away
- We weld on site in your driveway rather than hauling the gate back to a shop
- Every repair carries our 90-Day Done Right Promise, stamped on the invoice
- $40 off any repair over $200, no trip charge inside Denton County
- Hal Gatewood has been owner-operated since 2001, with a published address and license number
What Our Gate Repair Service Includes
Gate repair is rarely one problem. A gate that drags on the ground has already been wearing out its hinges for months. A motor that works sometimes has a wiring fault waiting to strand you. We walk the whole gate before we touch a tool, because fixing the panel without the post means you’ll fix it twice.
Electric Gate Repair
Electric Gate Repair covers the motor and control board, the safety edges, the photo eyes, the keypad, and the wiring that ties it all together. When your gate only opens halfway or the remote works from twenty feet away but not from the end of the driveway, that’s an electric issue, not a hinge issue. Hal and his crew diagnose the circuit with a multimeter before swapping any part, because on a gate that sees Denton’s thunderstorms and power surges, the problem is often in the wire, not the motor. We carry OEM parts for LiftMaster, DoorKing, FAAC, and Mighty Mule electric systems, so the fix stays fixed.
Automatic Gate Repair
Automatic Gate Repair means fixing the operator, the arm, the clutch, the gearbox, or the receiver that talks to your remote. An automatic gate that reverses right before it closes is telling you the limit switch is out of adjustment, and one that grinds without moving has a stripped gear inside the operator. We service and rebuild these systems on site, and we don’t talk you into a new operator when a $40 gear kit and an hour of labor solve the problem. If the gate still opens and closes but sounds wrong, call now because a driven gear that strips while you’re out means a gate stuck in the wrong position when you get back.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start with Hinge & Post Repair in Denton. Years of wind loading and clay soil that heaves with every wet-dry cycle work the post loose, and then the whole gate leans until it drags. We dig out, re-set, and sometimes weld a new post sleeve in place, then hang the gate square. This is the single most common repair we do in Denton’s older neighborhoods, where the posts were set before anyone thought about how much a 200-pound gate moves in a north Texas thunderstorm.
Gate Realignment
Gate Realignment returns a binding, scraping, or popping gate to straight. If your gate needs a shoulder bump to latch or the hinges squeal and the frame twists as it moves, it’s out of plane and every cycle is wearing the hinges harder. We use a level, a tape, and thirty years of knowing what an eighth-inch twist does over a year of daily cycles. A gate that sits square costs less to run, trips fewer safety sensors, and doesn’t eat motors every three years.
Lock Repair
Lock repair covers mechanical locks, electric strikes, maglocks, and the keypads and card readers that signal them to release. A deadbolt that used to slide smooth and now needs a hard pull is wearing internally, and in Denton’s dusty months, gate locks fill with grit faster than you’d think. We clean, rebuild, and replace lock hardware on site, and when the lock is tied into an access control system, we check the strike voltage before we ever touch the lock body. A sticky lock is a break-in risk, and it’s also the reason your opener motor burns out prematurely, because it’s fighting the latch every time.
Weld & Rust Repair
Weld and rust repair is where we earn most of our referrals in Denton, because a gate that’s rusted through at the bottom rail is a gate most companies tell you to throw away. Hal welds on site, in your driveway, without hauling the gate off, and he’s been running beads since before some of those national outfits had a website. We cut out the rust to clean steel, fishplate or sleeve the weakened section, and paint it to match, and the repair carries the same 90-Day Done Right Promise as a new gate. In Denton’s humidity and rain cycles, surface rust becomes structural rust faster than you’d think, so a bubble on the paint is a reason to call before it’s a hole.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Repair
We’ve rebuilt enough DoorKing operators in Denton to know the 9150 and 9050 boards by revision, and we keep their swing arm parts and control boards on the truck. Their motors are strong, but their capacitors go out in our summer heat before the manual says they should, and that’s a $40 fix most people get quoted a full operator for.
Ghost Controls builds a solid automatic gate kit for residential use, and we’ve installed and repaired enough of them to know their wiring colors by heart and their sensor brackets by failure pattern. When a Mighty Mule gate starts beeping and won’t budge, nine times out of ten it’s the battery or the control board, and we replace both on site without sending you to a distributor. Whether you have a DoorKing, a Ghost Controls, a Mighty Mule, or any other make, we can help, and we won’t tell you the brand is the problem just because we don’t carry the parts.
Signs You Need Gate Repair Right Now
- Your gate sags or drags on the ground. The hinge post has moved or the hinges themselves have worn oval, and every cycle compounds the damage. Once stone or concrete starts grinding the bottom rail, you’re welding steel instead of just adjusting a hinge.
- The opener runs but the gate doesn’t move. A stripped gear, a sheared key, or a broken chain puts all the motor’s force into nothing. The motor still spins, which means you’re paying for power and wearing the motor while the gate sits frozen.
- Your gate reverses unexpectedly or stops halfway. This is usually a safety edge or photo eye sending a false signal, but it can also be a limit switch that’s slipped out of position. An unpredictable gate is a liability, and in a driveway with kids or dogs, it’s a serious one.
- The gate moves slow, or hesitates before it starts. A dragging gate has been working your motor hard for months, and a weak start means a failing capacitor or a power supply issue in the board. Motors that die early almost always show this sign first.
- You see rust bubbles, cracked welds, or daylight through the frame. Rust in Denton’s climate crawls along the inside of a tube where paint never reached, and by the time you see a hole, the section is compromised. A cracked weld at a hinge or latch point is a gate that can drop or swing free without warning.
Our Gate Repair Process - Step by Step
We keep this simple because a gate repair shouldn’t be a mystery. Here is how every Denton job goes.
- 1
Talk to Hal, not a script. When you call (940) 394-8744, a live person picks up. You describe the problem, he asks the questions that matter, and you get an honest window for arrival, not a four-hour service window that turns into a whole day.
- 2
On-site diagnosis, before any wrench turns. Hal or one of his background-checked, uniformed crew walks the whole gate: hinges, posts, motor, board, wiring, safety edges, and locks. We test with a multimeter, a level, and a visual inspection that comes from 29 years of seeing how gates fail in Denton soil and Denton weather. You get a written price before we start, and that price does not change at the door.
- 3
The repair, done right in your driveway. We weld on site, we replace hinges and boards and gears from truck stock, and we don’t haul your gate off to a shop an hour away. Most repairs are done same day, and you’re welcome to watch, because there’s no mystery behind what we do.
- 4
Adjust, test, and cycle the gate repeatedly. We set the limit switches, check the safety edges with an obstruction test, and run the gate through full open-close cycles until it runs smooth. If a gate is supposed to reverse on contact, we make it reverse on contact.
- 5
Walk-through and the 90-Day Done Right Promise. We show you what was wrong, what we did, and what to watch for. Every job carries the 90-Day Done Right Promise, written on the invoice, not buried in fine print. If it’s not done right, one call brings Hal back.
How Much Does Gate Repair Cost in Denton?
A typical hinge and post repair in Denton runs $150 to $400 depending on how far the post has moved and whether we’re resetting it in concrete or welding a new sleeve. Electric gate repair, like a control board replacement or wiring fault, runs $200 to $600 depending on the part and how long it takes to trace the circuit. A stripped gear or capacitor in an automatic gate operator is usually $150 to $350 including the part and labor. Lock repair runs $100 to $300, and full weld-up rust repair on a steel gate runs $250 to $600 depending on how much steel we’re replacing.
What affects the price: the age and condition of the gate, whether the problem is one worn part or several, how far you are from our shop, and whether we’re matching paint on a gate that’s faded by ten years of Denton sun. What does not affect the price: what kind of car you drive, what neighborhood you live in, or how much you seem like you’d pay. The price we quote is the price you pay, quoted and agreed before any work starts, and we don’t add a trip charge inside Denton County. Right now, any repair over $200 takes $40 off the invoice, and seniors and veterans get a permanent 10% discount every day, not just on holidays.
The estimate is free. The second opinion is free too: bring us a written estimate from any other shop and we’ll walk your gate and tell you if they missed something or if they’re selling you work you don’t need. Call (940) 394-8744 for an exact quote, because a price range on a web page is not the same as a man in your driveway looking at your gate.
Gate Repair Near Denton - Our Service Area
We work throughout Denton County, including Gate Repair in Argyle and Gate Repair in Flower Mound, plus Little Elm, Krum, Corinth, Shady Shores, Cross Roads, Copper Canyon, Lantana, Bartonville, and Lake Dallas. Most of our Denton repairs are reached inside an hour, and because we don’t charge a trip fee inside the county, the drive doesn’t get added to your invoice. We’ve been at this since 2001, from the same shop with the same phone number, and the communities we serve are the same ones where Hal shops at the hardware store on Saturday.
If you’re reading this and you had a gate company from out of town come through last year, quote you one price and charge you another, you’re the exact customer we built this business for. We’ve repaired hundreds of gates in Denton that were “done wrong” by somebody else, and we start those jobs by undoing the sloppy work before we fix the gate. See our home page for all the ways we serve Denton, or read about our full Gate Repair in Denton service details.
Serving Denton, TX - Our Local Coverage Area
We’re based in the Denton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Repair in Denton
Gate repair is the process of diagnosing and fixing what’s wrong with a gate so it opens, closes, latches, and locks the way it was built to, whether the problem is a mechanical hinge, an electric motor, a control board, a lock, or rusted steel. In Denton, where heat and clay soil and thunderstorms all work against outdoor metal, gate repair usually means resetting a post, welding a cracked weld, or tracing a wiring fault that’s been building for months. At Gatewood Fence & Gate, we repair on site rather than replacing, which means we’re fixing what failed rather than selling you a whole new gate to fix a $40 part. Call (940) 394-8744 and Hal will talk you through what’s happening before anyone rolls a truck.
Most Denton gate repairs take 1 to 3 hours on site, including the diagnosis, the repair, and the full testing after it’s done. Hinge and post work can take longer because concrete or soil has to be dug out and re-set, and severe rust repair or a full control board rewire can stretch into a half-day. We schedule most repairs the same day you call, and because we keep parts for nine major brands on the truck, there’s no waiting a week for a component to ship from out of state. Call us at (940) 394-8744 with a description of the problem and we’ll give you an honest time window before we ever leave the shop.
Gate repair in Denton typically costs $150 to $600, with most jobs landing in the $200 to $400 range. A hinge replacement runs on the low end, a control board or weld-up rust repair on the high end, and the exact price depends on what failed, how many parts we’re replacing, and how far the gate has degenerated since the first sign of trouble. We quote a fixed price before any work starts, we don’t charge a trip fee inside Denton County, and any repair over $200 takes $40 off right now. Seniors and veterans get 10% off no matter what, and the price we quote is the price you pay, in writing.
Yes, we service DoorKing, Ghost Controls, and Mighty Mule gates, along with six other major brands including LiftMaster, FAAC, BFT, Linear, Viking, and Elite. We stock OEM parts for all of them and Hal has been rebuilding these operators since before some of their current models were released. A Gatewood Fence & Gate repair on a DoorKing swing arm uses the same parts the factory put in it, not a knockoff from a warehouse discounter. Bring us any of these brands or any other make, and we’ll fix it the same way we fix every gate: on site, with a written price, and standing behind it with our 90-Day Done Right Promise.
Yes, in most cases we can get to your Denton gate the same day you call, and our phone is answered by a live person 24 hours a day, not a voicemail. If your gate is stuck open and you can’t secure your property, or stuck closed and blocking your car from leaving, call (940) 394-8744 and explain what’s happening. We prioritize the calls where a gate failure means a security problem or a driveway you can’t use, and there’s no trip charge inside the county even for emergency calls. Hal carries his cell number and answers it, because an emergency gate is not something to route through a call center three states away.
Yes, every gate repair we do in Denton carries a 90-Day Done Right Promise, in writing, on the invoice, not buried in fine print. If the repair fails inside 90 days because we didn’t do it right, one call brings Hal back and he makes it right without charging you for labor on the fix. The 90-Day Done Right Promise applies to every repair we do, from a hinge to a full control board replacement, and it’s stamped on the job ticket so there’s no argument later. We’ve been standing behind our work this way since 2001, and in Denton County, word travels fast when a man doesn’t keep his promises.
You don’t need to do much, but clearing a path to the gate helps, especially if you have a driveway gate with landscaping grown up around the post. If you park inside the gate, have the gate in a position where we can access it, and if it’s stuck closed, we can still work on it. Remove any bikes, trash cans, or vehicles leaning against or parked near the gate so we have room to open our tools and run the gate through its cycles. Most important, be there when we arrive if you can, because watching Hal diagnose the gate and hearing what he finds is usually enough to tell you whether you’re working with somebody who knows his business. Call (940) 394-8744 and we’ll walk you through anything you’re not sure about before the appointment.
Schedule Your Gate Repair Service in Denton Today
Call (940) 394-8744 and a live person answers, day or night. Tell us what your gate is doing, or not doing, and we’ll give you a straight answer and a free estimate with no obligation. The price is quoted before we start, the repair is done in your driveway, and the 90-Day Done Right Promise comes with every job. Hal Gatewood has been fixing gates in Denton since 2001, and his name is on the shop, the invoice, and the work.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Denton since 2001.