Automatic Gate Repair in Denton, TX

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Automatic Gate Repair in Denton, TX

When your automatic gate stops opening or starts grinding, you need a fix that lasts, not a temporary patch. Automatic gate repair in Denton typically runs between $150 and $450 depending on whether the issue is a simple sensor misalignment, a worn-out drive belt, or a failing control board. At Gatewood Fence & Gate, we handle these repairs on-site, usually getting your gate moving again the same day you call. You can reach us directly at (940) 394-8744 to schedule a visit.

I have been fixing gates in this part of Texas since 2001, and I have seen just about every way a gate can fail. Most of the time, the problem isn’t the motor itself, but the way it’s been maintained or installed. Whether you are dealing with a gate that won’t close during a heavy Denton thunderstorm or a keypad that has stopped communicating with the operator, we do not just swap out parts. We diagnose the root cause so you aren’t calling us back for the same issue next month. If you are looking for broader services, you can find our full range of options on our main Gate Repair in Denton page or head back to our home page to see everything we do.

When You Need Automatic Gate Repair

Your gate usually gives you warning signs before it quits completely. Ignoring these small issues often leads to a full system lockout, which is the last thing you want when you are trying to get to work or pull into your driveway after a long day.

• The gate moves in jerks or stutters: This often points to a worn drive chain or debris in the track. In the Denton area, we see this frequently after high-wind events where dirt and grit get packed into the mechanism.
• Loud grinding or screeching noises: If you hear metal-on-metal sounds, stop using the gate immediately. It usually means the gears inside your motor are stripped or the bearings have failed, and continuing to run it will turn a $200 repair into a full motor replacement.
• The gate fails to close or open: If the motor hums but nothing moves, the clutch might be slipping or the drive belt is snapped. This is a common issue with older units that have been exposed to our intense Texas summer heat.
• Safety sensors trigger randomly: If your gate stops or reverses for no reason, the photo-eyes are likely misaligned or dirty. Spiderwebs and dust are the number one enemy of these sensors in North Texas.
• The remote or keypad is unresponsive: Before you assume the worst, we check the control board and antenna. Sometimes it is just a signal interference issue that can be cleared up without replacing expensive electronics.

If you notice any of these symptoms, call (940) 394-8744. We provide a free second opinion on any written estimate you have already received from another company, so you don’t have to guess if you are getting a fair price.

Our Automatic Gate Repair Process

I believe in fixing the gate where it stands. I do not believe in hauling your equipment off to a shop unless it is absolutely necessary. Here is how we handle repairs at Gatewood Fence & Gate:

1. The Initial Assessment: I or one of my crew members will arrive at your property to test the gate’s movement and listen to the motor. We don’t just look at the gate; we look at the hinges and the post, because a gate that sags in the hinge post will put unnecessary strain on your automatic operator every single time it opens.
2. Identifying the Source: We open the control box and inspect the board, wiring, and limit switches. We work on nine major brands, including Ghost Controls, DoorKing, and Elite, so we know exactly how these systems are supposed to behave.
3. On-Site Repair: Most repairs involve adjusting tension, replacing capacitors, cleaning photo-eyes, or fixing wiring issues. If we need to weld a bracket or reinforce a hinge, we do it right there in your driveway.
4. Safety and Function Test: Once the repair is done, we cycle the gate multiple times. We verify that the safety reversal system is working perfectly, which is non-negotiable for the safety of your family and pets.
5. The 90-Day Done Right Promise: Every repair we do comes with our 90-Day Done Right Promise. If the issue returns within 90 days, we come back and fix it. No runaround, no excuses.

Safety is not a suggestion. High-tension springs and powerful gate motors can cause serious injury if handled improperly. If your gate is acting up, please do not try to force it open or bypass the safety sensors. Let a trained professional handle the mechanics. Call us at (940) 394-8744 so we can get it sorted safely.

Automatic Gate Repair Pricing in Denton

We believe in upfront pricing. You will never see a “trip charge” on your invoice if you are inside our county, and we don’t believe in surprise fees. We offer a $40 discount on any repair over $200, and seniors and veterans always receive a permanent 10% discount on our work.

These ranges are estimates based on standard labor and common parts. When we come out to your property, we will give you a firm number before we turn a single wrench. If you have a written estimate from someone else, we are happy to take a look at it for free. Give us a call at (940) 394-8744 to get started.

FAQs - Automatic Gate Repair

Is it cheaper to repair or replace my gate motor?

Usually, it is cheaper to repair, provided the motor housing and internal gears are in good shape. For Electric Gate Repair, If the motor is over 15 years old and the main control board has failed, replacement might be the more cost-effective choice in the long run. We will always give you an honest recommendation based on the current state of your specific unit, whether it is a Mighty Mule or a heavy-duty commercial operator. Call (940) 394-8744 and we can help you weigh the options.

Can you fix my gate today?

We prioritize repairs because we know an open gate is a security risk for your home or business. While we cannot guarantee same-day service for every single call, we have a live person answering the phone 24/7, and we do our absolute best to get to you as quickly as possible. If you are stuck, call (940) 394-8744 and let us know your situation.

Do you work on all brands of gate openers?

We are certified to service nine major brands, including Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we have been doing this since 2001, we have a deep inventory of parts and the specific knowledge required to troubleshoot these systems without guessing. If you have a brand that is not on our list, tell us when you call, and we will let you know if we can help.

Why does my gate keep reversing when it hits the middle?

This is almost always a sign of an obstruction in the path, a dirty safety sensor, or an issue with the limit switches that tell the motor when to stop. Sometimes the gate is simply too heavy for the current settings, which causes the motor to think it has hit an object and may require Gate Realignment. We can diagnose this quickly on-site and adjust the force settings or clear the sensors. Call (940) 394-8744 to have us look at it.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Denton.