Gate Repair in Denton - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across Denton

Gate repair in Denton usually means one of two things: a gate that won’t open because the operator quit, or a gate that drags because the post underneath it moved. Both are fixable, and most repairs we handle in Denton are done the same day we look at them. Hal Gatewood has been running Gatewood Fence & Gate since 2001, and the trucks we send into Denton carry welders, post concrete, hinge stock, and control boards on board, so the first trip usually knocks out the whole job. If your gate is hanging crooked near UNT or refusing to cycle off 288, call (940) 394-8744 and you’ll get a live person, not a recording.

Call (940) 394-8744

Why Gatewood Fence & Gate Is Denton’s Preferred Gate Repair Company

We’re not a franchise outfit with a rotating cast of subcontractors. Hal’s name is on the shop, his address is published, and the person who answers your call is someone who can actually talk about your gate, not just schedule a window. Denton homeowners tell us they’ve been burned by national companies that quote one number over the phone and hand them a different invoice at the door. We quote a price before any work starts and that’s the price.

Our crew works in Denton every week, from the established neighborhoods east of Bell Avenue to the newer subdivisions pushing north toward Krum. We know which gates in the older parts of town were set without concrete, and we know what a North Texas ice storm does to a swing gate that was already fighting its hinges. Every job carries the 90-Day Done Right Promise in writing: if it’s not done right, Hal comes back and makes it right. No runaround, no “call the warranty department.”

We also answer the phone 24 hours a day. Seven days a week. If your gate is stuck open at 2 a.m. and your dog has opinions about that, a real person picks up.

Our Gate Repair Services in Denton

Electric Gate Repair

There are a lot of tired operators around Denton. Gates installed in the early 2000s, when Denton’s suburban growth really took off, are now 15 to 25 years old. Control boards fail, capacitor packs burn out, and the receiver stops hearing the remote. We stock common boards and parts for LiftMaster, DoorKing, and Mighty Mule operators, so we can often get a stubborn electric gate running again in one stop. If the board is obsolete and no replacement exists, we’ll tell you before we touch anything, and we’ll give you a retrofit price in writing.

Automatic Gate Repair

An automatic gate that slams or reverses mid-cycle is a safety problem first and an inconvenience second. Around Denton, we see a lot of automatic gates where the safety photocell was skipped at installation or has since been knocked out of alignment by the same soil movement that’s shifting the posts. We repair the opener, but we also check the safety edges and beam alignment before we call the job done. If your gate operator is more than 12 years old, a retrofit with a modern safety system often costs less than chasing an obsolete board every six months.

Hinge & Post Repair

This is the one that matters most in Denton. Blackland Prairie clay swells when it’s wet and shrinks when it’s dry, and your gate post is sitting in that moving soil. A gate sags in the hinge post, not in the middle, and that’s where we start. We weld cracked hinges, replace seized ones, and re-set posts that have heaved or leaned. If the footing was poured too shallow or never existed at all, we dig it out and pour a proper post footing before re-hanging the gate. Fix the panel without the post and you’ll fix it twice.

Gate Realignment

A gate that drags on one corner or won’t latch isn’t necessarily a broken hinge. In Denton, it’s often a post that moved and took the whole frame out of square. We realign the gate to the post, or the post to the gate, whichever is actually the problem. In the neighborhoods near the historic downtown square, we re-set a 1930s wood-post swing gate that had heaved out of plumb by nearly two inches after a wet spring. The hinge post had no concrete footing, so we excavated, poured a new post footing, and retrofit a LiftMaster operator with a safety photocell before re-hanging the gate to clear the racked frame. That’s the kind of repair that lasts, because we fixed what was actually wrong.

Trusted Brands We Service in Denton

We’re certified to work on nine major gate brands, but around Denton the ones we see most are LiftMaster, DoorKing, and Mighty Mule. LiftMaster dominates the residential swing gate market, DoorKing shows up on a lot of the older estate gates in the county, and Mighty Mule is common on the DIY-friendly farm and ranch gates north of town. We keep common control boards and receiver parts on the truck for those three specifically. For anything we don’t have on hand, our parts network gets it to us fast, usually next day, and we’ll weld brackets or adapt mounts in the shop when a part is discontinued rather than telling you to replace the whole system.

Common Gate Repair Problems We See in Denton Homes

• Posts heaving out of plumb. Blackland clay swells with rain and shrinks in drought. A post that moves an inch in a season is enough to make a double gate meet too early or a latch miss entirely. We re-set posts with footings deep enough to get below the worst of the shrink-swell zone.
• Ice storm damage to hinges and welds. Denton catches severe ice storms more reliably than Dallas proper. When a quarter inch of ice loads onto a wooden privacy gate, the hinge screws and the welds are the first things to give. We see cracked welds and torn hinge leaves every February.
• Obsolete operators on older estate gates. Gates installed in the late 1990s and early 2000s often run on control boards that haven’t been manufactured in a decade. When they fail, the question is whether to retrofit or replace. We’ll give you both prices and a straight recommendation.
• Rotted posts on student rental properties. Within a mile or two of UNT, landlords patch rather than replace. We find gates that have been shimmed and re-shimmed on posts that are half rotted through. The gate might work for another month, but full post replacement is the only honest fix, and it’s usually cheaper than the tenant turnover problem it prevents.

Pricing for Gate Repair in Denton, TX

We Also Serve Cities Near Denton

Our Gate Repair in Denton crew covers the whole county, including Krum, Argyle, Ponder, and Lake Dallas. If you’re just outside the city limits and not sure whether we make the trip, we probably do. Call and ask, or check our Gate Repair page for the full list of what we fix.

FAQs - Gate Repair in Denton