Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHinge & Post Repair in Denton, TX
Gate repair for hinges and posts in Denton typically costs between $250 and $650, depending on whether we are performing a structural weld reinforcement or a full post reset. Most of these repairs are completed in a single visit, provided the gate has not suffered severe structural damage from a collision or years of neglect. If your gate is dragging on the concrete, failing to latch, or leaning inward, the problem is almost never the gate panel itself. It is the post or the hinge point, and that is where we focus our work.
When you have a gate that refuses to close, you do not need a salesperson trying to upsell you on a new operator or a full gate replacement. You need someone who knows how to identify the root cause of the failure. At Gatewood Fence & Gate, I have been fixing residential and commercial gates since 2001. I have seen how the soil in Denton causes posts to shift and how high winds stress hinge points over time. We specialize in on-site weld & rust repair and structural repairs that keep your existing gate in place, saving you the expense and hassle of a full replacement. If you are dealing with a gate that is sagging or stuck, call us at (940) 394-8744 for a straightforward assessment.
We are a locally owned, owner-operated shop. My name is on the company, and I stand behind every job with our 90-Day Done Right Promise. If we fix your hinge or post and it is not right, I will come back and make it right. We provide professional Gate Repair in Denton for homeowners who want to deal with a real person, not a call center or a national franchise that treats your property like a ticket number.
When You Need Hinge & Post Repair
A gate does not fail overnight. It gives you signs long before the metal snaps or the post pulls out of the ground. Knowing what to look for can save you from a major security breach or an expensive emergency repair. If you notice any of the following, give us a call before the situation gets worse.
- The gate drags on the driveway: This is the most common symptom in Denton. It usually means the hinge post has shifted due to soil movement or that the hinges have worn down to the point where the gate is no longer level.
- The gate fails to latch: If the gate closes but misses the catch, the entire assembly has likely dropped or tilted. Adjusting the latch is a temporary fix; you have to address the hinge or the post to stop the problem from returning.
- Grinding or popping noises during operation: When you hear metal-on-metal noise, the bearings in your hinges are likely shot or the hinge pin is grinding against the housing. This puts immense strain on your gate motor, such as a LiftMaster or Ghost Controls unit, and will eventually burn out the motor.
- Visible cracks in the weld: Inspect the point where the hinge connects to the post or the gate frame. If you see daylight between the metal or rust bleeding from a hairline crack, that weld is failing. Do not wait for it to snap completely.
- The post is leaning inward: This is a structural failure. If the post is not plumb, the weight of the gate is pulling it out of the ground. This requires a different approach than a simple hinge adjustment and often involves bracing or resetting the post.
- The gate swings freely or slams shut: If the gate has no resistance, the hinges may have sheared off or the post has completely failed. This is a safety hazard, especially for families with children or pets.
Safety Warning: A residential gate can weigh several hundred pounds. If a hinge fails or a post snaps, that weight can cause serious injury. Do not attempt to hold up a falling gate yourself or try to rig a temporary fix with wire or rope. If your gate is unstable, keep pets and children away from the area immediately and call us at (940) 394-8744 to have a professional secure it.
Our Hinge & Post Repair Process
We do not believe in hauling your gate off to a shop unless it is absolutely necessary. Most repairs are done right in your driveway. We bring our lock repair tools, welding equipment, and our experience to you. This is how we handle a standard hinge and post repair.
- Structural Assessment: I start by checking the plumb of your post and the integrity of your hinge welds. We need to determine if the post is loose in the ground or if the metal itself has fatigued. If the post is solid but the gate is sagging, we focus on the hinge points.
- Hinge Reinforcement or Replacement: If the hinges are worn or damaged, we remove the old hardware. We often upgrade to heavier-duty hinges that can better handle the weight of the gate. If the metal on the gate frame is thin or rusted, we weld a reinforcement plate to provide a solid mounting surface for the new hinges.
- Post Stabilization: If the post is leaning because of the soil, we evaluate the foundation. In some cases, we can install a steel brace or a support strut to counteract the lean. If the post has failed internally, we may need to reset it or install a secondary support post.
- Alignment and Tuning: Once the hinges are secured and the post is stabilized, we align the gate so it swings perfectly level. The gate should be able to stop in any position without swinging open or closed on its own.
- Motor Calibration: If you have an opener, such as a DoorKing or Mighty Mule system, we check the limits and the force settings. A gate that is properly aligned requires less power to open, which extends the life of your motor.
- Final Inspection: Every job is checked against our 90-Day Done Right Promise. We ensure the gate operates smoothly and that the area is clean before we leave.
The name is on the shop, and the shop is down the road. That is the oldest accountability there is. When I fix your gate, I am doing it with the knowledge that I am part of this community.
Hinge & Post Repair Pricing in Denton
We believe in upfront pricing. You will not be surprised by a bill that is higher than the estimate. Because every gate is different, the cost depends on the materials required and the complexity of the weld. We offer a free second opinion on any written estimate you have received from another company.
| Service Type | Estimated Range |
|---|---|
| Minor Hinge Weld/Reinforcement | $250 – $350 |
| Post Alignment & Bracing | $350 – $550 |
| Heavy-Duty Hinge Replacement | $300 – $450 |
| Full Post Reset/Replacement | $650+ |
We offer a standing $40 discount on any repair over $200. If you are a senior or a veteran, you are eligible for a permanent 10% discount on our services. We do not charge a trip fee if you are located inside the county. To get an exact price for your specific gate, call us at (940) 394-8744. We provide free estimates, and I will be happy to tell you exactly what you need to get your gate working again.
FAQs - Hinge & Post Repair
Can you fix my gate if the post is rotten at the bottom?
Yes, but we need to see it first. If the post is rotted through at the ground level, it usually cannot be braced, and we will need to replace the post or install a new, adjacent post to carry the weight. We will assess the damage and give you an honest recommendation on whether a repair is safe or if a replacement is the only responsible option.
Why does my gate drag on the driveway every spring?
Denton soil is notoriously expansive, and when it gets wet, it shifts. This causes posts to heave or tilt, which changes the alignment of your gate. We see this every year. If your gate drags only during the wet season, we can install adjustable hinges that allow you to tweak the gate height yourself, or we can look at stabilizing the post foundation.
Is it cheaper to repair or replace my gate?
In almost every case, it is cheaper to repair the hinge or the post than to replace the entire gate system. We are a repair-first company. I do not like selling parts or new gates when a few hours of welding and adjustments will keep your existing setup running for years to come, including automatic gate repair. Call (940) 394-8744 for a second opinion before you sign a contract for a full replacement.
Can you fix my gate today?
We answer our phones 24 hours a day, 7 days a week, and we prioritize urgent repairs that pose a security risk or prevent you from accessing your property. While we cannot guarantee a same-day slot for every single call, we have a live person on the line who can look at our schedule and let you know when we can get out to your property. Call us at (940) 394-8744 to check our availability.
When you have a gate issue, you want it handled by someone who has been doing this long enough to know what works and what does not. We are locally owned and owner-operated, and we have been serving Denton since 2001. We do not use call centers, and we do not pass you off to a third-party contractor. When you call (940) 394-8744, you are talking to a business that is invested in the neighborhood. Whether you need a simple weld or a complex post repair, we are here to help. Estimates are free, and we are ready to help you get your gate moving properly again.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Denton.