Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Lantana
Gate repair in Lantana, TX usually runs $175 to $650 depending on whether it’s a hinge post reset, a control board replacement, or a full operator swap. We cover all of it, and we answer the phone when you call: (940) 394-8744. If your gate won’t close, won’t open, or is leaning hard after the last rain, we’ll get someone to your place fast, typically same day or next morning.
Lantana isn’t like working a gate in a generic suburb. Every repair here has a second layer to it: the Lantana Community Association’s Architectural Review Board. That’s not a headache for you to figure out alone. Hal Gatewood has been navigating ARB requirements on ornamental gates across Lantana for years, and the person who shows up at your driveway knows exactly what documentation and hardware specs the HOA will ask for before the first weld happens. That’s the difference between a repair that’s done and a repair that’s approved.
Key Takeaways
- Same-day or next-morning response to every Lantana neighborhood
- Upfront pricing agreed before any work starts, no trip charge inside Denton County
- On-site welding means your gate stays in your driveway, never hauled to a shop
- 90-Day Done Right Promise in writing on every repair
- HOA ARB documentation handled as part of the repair when needed
Why Gatewood Fence & Gate Is Lantana’s Preferred Gate Repair Company
Hal Gatewood started this company in 2001, and his name is still on the shop and every invoice. That’s a level of accountability you won’t get from a franchise that rotates techs through the area. Lantana customers call us because they want a name, a face, and a phone number that works the second time. We’ve repaired gates in every corner of Lantana, from the custom ornamental entries off Lantana Trail to the newer builds near the west side.
Our reputation in Lantana is built on showing up when we say we will and fixing the actual problem, not the easiest version of it. When a gate sags, we start at the hinge post, not the center of the panel. When an opener throws a fault, we test the sensor alignment before we sell you a motor. That’s how Hal would fix his own gate, and it’s how we fix yours.
Because we serve Lantana regularly, our crew knows the local gate styles, the common builder hardware, and the soil conditions before they even arrive. That local knowledge shortens the diagnosis time significantly. You’re not paying us to learn your neighborhood. You’re paying us to know it already.
We also understand that Lantana homeowners expect a certain level of finish. These aren’t cheap tubular farm gates. These are welded ornamental iron entries, many with automated operators and intercom or camera systems. The person working on your gate needs to treat it with the respect a custom installation deserves. Our technicians are background-checked and uniformed, and they clean up the work area before they leave.
Our Gate Repair Services in Lantana
Hinge & Post Repair
This is the repair we do most often in Lantana, and it’s almost always tied to the soil. Denton County’s black clay expands dramatically after spring rains, which pushes against concrete footings and tilts hinge posts out of plumb. A leaning post puts uneven load on the hinge barrels, which wears them oblong and makes the gate scrape or bind. We re-plumb the post with a new footing where needed and replace or weld the hinge with the correct load rating for the weight of your gate. Fix the post without the hinge and you’ll fix it twice.
Gate Realignment
When your gate starts dragging on the latch side or won’t seat against the closer, it’s a realignment issue. In Lantana, this is often the second symptom of clay movement: the post shifted, the gate followed, and now the whole geometry is off. Realigning a heavy ornamental gate isn’t just elbow grease; it’s getting the swing arc, latch clearance, and operator travel all back in agreement. We carry laser levels and realignment shims on every truck because we know one Lantana repair can cascade into a dozen small adjustments.
Electric Gate Repair
Automated gates in Lantana are usually loaded with extras: keypads, vehicle loop detectors, photocells, sometimes intercom or camera call boxes. When the gate won’t respond to the remote or won’t close automatically, the issue can live in any of those components or the main control board. We service the full electrical side, from wiring and limit switches to motherboard replacement. And because we stock common boards and sensors locally, we’re not waiting a week on a part that ships from across the country.
Lock Repair
A gate lock that’s gone stiff or a maglock that won’t hold isn’t just inconvenient; it’s a security gap on a property you expect to stay private. We repair and replace mechanical locks, solenoid locks, and magnetic locks on automated gates throughout Lantana. If your gate is on an access control system, we’ll get the lock talking to the controller again so the whole entry works as one system, not a collection of half-working parts.
Weld & Rust Repair
Ornamental iron gates in Lantana are exposed to heat, humidity, and occasional hail. Over time, welds crack at the picket-to-rail joints and surface rust creeps into the scrollwork. We weld on site, in your driveway, with the gate in place. We don’t haul it away to a welding shop. That means you see the repair as it happens, and the gate never leaves your property. Matching the finish and chasing the rust so it doesn’t return is part of the job, not an upsell.
For a deeper look at what we do, our Gate Repair team covers the full scope of services, from operators to access control. Every job is quoted upfront and agreed before we touch a tool.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lantana
We’re certified to work on nine major gate operator brands, and in Lantana we see a lot of LiftMaster, Doorking, and Elite on the automated entries. We also regularly service BFT and Linear operators on the higher-end custom gates, along with Viking and Ghost Controls on lighter-duty residential automation. Because we know which boards and hardware Lantana builders specified in the 2000s and 2010s, we can often identify the fault before we even open the cover. If a part is needed, we have fast access locally and can usually have most common components in hand the same day. You won’t sit with a dead gate for a week waiting on freight.
Common Gate Repair Problems We See in Lantana Homes
- Leaning hinge posts from clay expansion: The black clay under Lantana swells in wet springs and shrinks in dry summers, heaving concrete footings just enough to throw a heavy ornamental gate out of plumb. The gate starts dragging or the latch won’t seat.
- Close-limit sensor drift after soil movement: When a post shifts, the automated opener’s limit sensor falls out of alignment. The motor still runs, but the gate won’t seal or it reverses unexpectedly. We realign sensors on every post-reset call.
- Underground slide gate operators fouled by soil shift: Lantana has its share of slide gates, and when the clay moves, the ground track can shift with it. That shears rack teeth or binds the chain. We repair the rack and reset the operator to run clean.
- HOA non-compliant hardware or finishes: A previous owner or a handyman may have installed a latch or operator that the Lantana Community Association won’t approve. We match ARB-approved ornamental styles and finishes so your repair doesn’t become a compliance letter.
Pricing for Gate Repair in Lantana, TX
Here’s what we typically see in Lantana for common repairs:
- Hinge replacement or weld repair: $180-$320
- Gate realignment (labor only): $150-$275
- Hinge post reset with new concrete: $350-$650, depending on gate weight and footing condition
- Control board replacement: $275-$500, including programming
- Full operator swap (motor and arm): $600-$1,200, depending on brand and gate length
- Photocell or loop detector repair: $150-$300
Soil conditions and gate weight move these numbers around. A 600-pound custom ornamental gate takes longer to re-plumb than a lightweight tube gate. We quote the price before the work starts and honor it. No trip charge inside the county. And every repair over $200 is $40 off, plus we extend a permanent 10% discount to seniors and veterans. We also give a free second opinion on any written estimate from another company. Call (940) 394-8744 and we’ll walk you through what the repair should cost.
We Also Serve Cities Near Lantana
If you’re in Denton, Argyle, Flower Mound, or Little Elm, you’re inside our regular service area. The same crew that handles Gate Repair in Lantana covers those communities too, with the same upfront pricing and 90-Day Done Right Promise. If you live just outside the Lantana gates, call us; we’re probably already working down the road.
Serving Lantana, TX - Our Local Coverage Area
We’re based in the Lantana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Lantana
Yes, most exterior gate repairs and replacements in Lantana require approval from the Lantana Community Association’s Architectural Review Board, because the community’s guidelines cover ornamental iron styles, finishes, and hardware. We handle the documentation and submit the repair details for ARB sign-off so the work isn’t held up or flagged after the fact. Call (940) 394-8744 and we’ll tell you what your specific repair will need.
The black clay soil across Lantana and Denton County swells when it absorbs spring rain, which heaves the concrete footing around your hinge post. The post tilts, the gate follows, and by summer the clay shrinks back and leaves the post settled at a new angle. Re-plumbing the post with a properly sized footing is the real fix; the lean returns if the footing wasn’t deep enough originally. A sensor realignment is part of that repair every time.
In Lantana it’s more often the sensors than the motor, because clay movement knocks the close-limit sensor out of alignment. The motor may be fine, but the control board thinks the gate hasn’t reached the closed position. If the motor is truly dead, replacing it is straightforward. We’ll diagnose it on the spot and quote the repair before any work begins.
Almost always. Most custom ornamental gates in Lantana can be welded, straightened, or re-hinged without replacing the gate. We weld on site in your driveway and match the original finish and scrollwork. Replacing the entire gate is the last resort only when the frame is structurally compromised beyond weld repair.
Underground slide gate operators in Lantana get fouled when the clay shifts the ground track even a quarter inch. The rack and pinion teeth bind or shear. We reset the track, repair or replace the rack, and realign the operator so the gate runs clean without dragging. If the clay movement was severe, we’ll recommend a concrete bed repair to stop it recurring. Call (940) 394-8744 for an exact quote; estimates are free.
Contact Gatewood Fence & Gate for Gate Repair in Lantana
If your gate is leaning, stuck, or refusing to close, call (940) 394-8744 right now. A live person answers, 24 hours a day, seven days a week. No voicemail tree, no call center. We’ll schedule a visit to your Lantana home, diagnose the problem, and give you a written price before the work starts. Every repair carries the 90-Day Done Right Promise: if it’s not done right, one call brings Hal back to make it right.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lantana since 2001.