Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Little Elm
If your automatic gate in Little Elm is sagging, grinding, or refusing to open, the fix usually starts at the hinge post, not the motor. We’re Gatewood Fence & Gate, and we’ve repaired gates along Eldorado Parkway, in lakefront communities off Main Street, and across every HOA subdivision in between. Most repair calls in Little Elm get a same-week visit, and a live person answers when you call (940) 394-8744. Our Gate Repair crew works on the gate in your driveway, welds on site, and leaves you with a written 90-Day Done Right Promise.
Why Gatewood Fence & Gate Is Little Elm’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001, and his name is still on the door. That matters in Little Elm because so much of the gate work here runs through HOA management companies, architectural review committees, and neighbors who talk. We show up in uniform, background-checked, and we don’t do the call-center shuffle. You call, a person answers, and the person who comes to your driveway is the same person who will stand behind the repair if anything goes wrong.
We work on the gate systems that dominate Little Elm’s master-planned communities: wrought-iron swing gates, steel slide gates, and the low-voltage operators that run them. Since virtually all of Little Elm’s housing stock is post-2000 construction, those gates are now hitting their 10-to-20-year service window at the same time. Entire neighborhoods of identically spec’d gate systems are degrading on the same schedule. We’ve seen it on Lakefront Drive, in Paloma Creek, and through the gated entrances off King Road. When we fix a gate in Little Elm, we’re usually back in the same neighborhood the following month for another one.
Clients in Little Elm call us because we actually answer the phone at 2 a.m. when a gate motor burns out and the HOA’s emergency line is a voicemail. The phone number is (940) 394-8744. Try it. A person picks up.
Our Gate Repair Services in Little Elm
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that’s where we start on every Little Elm job. The Blackland Prairie clay under this town shrinks during summer droughts and heaves when fall rain arrives, which tilts posts out of plumb and drags the gate out of square. We re-plumb the post, weld the hinge barrel if it’s wallowed out, and set the gate to swing true again. In HOA communities where every third gate post is leaning the same direction after a dry August, this is the single most common repair we make.
Automatic Gate Repair
Little Elm’s automatic gate operators get hit from two directions: lake humidity that corrodes low-voltage boards and clay soil that misaligns actuator arms. When an operator throws an obstruction code on a cool morning after a hot, dry summer, the arm and the board both need looking at. We carry LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule parts on the truck, and we reprogram limit switches on site. If the board’s terminals are green with corrosion, we’ll show you before we quote the replacement.
Weld & Rust Repair
Rust is a bigger problem in Little Elm than in most of Denton County. Lewisville Lake’s humidity accelerates pitting on steel panels and corrodes hinge hardware within ten years, especially within a half-mile of the water. We weld cracked rails, rebuild rusted hinge mounts, and swap standard hardware for stainless on lakefront jobs. Our welder runs off the truck, so the gate never leaves your posts. Fix the panel without the post and you’ll fix it twice. We don’t do that.
Gate Realignment
When a swing gate scrapes the driveway or a slide gate binds on its track, the cause is usually a post that moved, not a wheel that wore out. Little Elm’s clay soil makes this worse than in cities built on rock. We check the post footing first, then adjust the hinges, track, or actuator arm and recalibrate the operator. If the post has shifted more than a degree or two, we’ll set it back before anything else. Realigning a gate without fixing the post is like tuning an engine with a cracked block.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Little Elm
We’re certified to service nine major gate brands, and Little Elm’s HOAs lean heavily on three of them: Ghost Controls on residential swing gates, DoorKing on slide gates at subdivision entrances, and Elite on commercial and shared driveway systems. We keep boards, remotes, photocells, and limit switches for these brands stocked locally, so a service call in Little Elm doesn’t have to wait on a parts shipment from California. If your HOA’s slide gate runs a Mighty Mule operator, we service those too. Same truck, same trip.
Common Gate Repair Problems We See in Little Elm Homes
- Lakefront corrosion on motor boards and housings. Gates within a half-mile of Lewisville Lake corrode noticeably faster than identical equipment in Frisco or Prosper. We recommend sealed NEMA-rated control enclosures and stainless hardware on nearly every near-lake repair.
- Clay-soil post drift. Little Elm sits on expansive Blackland Prairie clay. Summer drought shrinks it, fall rain heaves it, and gate posts tilt out of plumb. Entire HOAs throw the same operator error codes in the same season.
- Hail-damaged panels. Spring severe weather pounds Little Elm with hail that dents aluminum and steel gate panels across whole subdivisions in a single storm. We weld, straighten, and refinish those panels without replacing the gate.
- Failed hinge welds on ornamental iron gates. The combination of lake humidity and gate weight breaks hinge barrels faster here than inland. We weld new hinge barrels on site and re-hang the leaf the same day.
Pricing for Gate Repair in Little Elm, TX
Gate repair in Little Elm runs a wide spread because the work varies from a simple limit switch recalibration to a full post re-set. A hinge barrel replacement or realignment typically runs $180 to $340. Replacing a corroded control board on an automatic swing gate runs $250 to $450 depending on brand. Weld repair on a cracked wrought-iron panel runs $150 to $300 per repair point. A full post re-plumb and re-set runs $400 to $650 when the post hasn’t cracked and we can lift it straight with the gate in place. Every price is quoted and agreed before any work starts. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (940) 394-8744 for an exact quote. Estimates are free, and if another company gave you a written estimate, bring it. We’ll give you a second opinion at no charge.
We Also Serve Cities Near Little Elm
Gatewood Fence & Gate works all over the Little Elm area and nearby Denton County. We regularly repair gates in Lake Dallas, Denton, Argyle, and Flower Mound. If you’re just outside Little Elm, call anyway. If we can’t get to you, we’ll tell you straight and point you to someone who can. For all of Gate Repair in Little Elm and the surrounding communities, the phone number is the same: (940) 394-8744.
Serving Little Elm, TX - Our Local Coverage Area
We’re based in the Little Elm area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Little Elm
Yes, in most of Little Elm’s master-planned communities, any change to gate style, height, finish, or operator equipment requires architectural review committee approval before work starts. We coordinate with management companies regularly. Bring us the ARC form and we’ll help you fill out the gate-specific sections with the materials, colors, and dimensions the committee wants to see. Plain repair of the existing gate (like a hinge weld or a board swap with identical equipment) usually doesn’t trigger a review, but changing from a swing to a slide operator or painting the gate a different color almost always does. Call (940) 394-8744 and we’ll tell you what needs to go through the HOA before we touch anything.
Humidity and spray from Lewisville Lake accelerate corrosion on steel panels and low-voltage motor boards, especially within a half-mile of the water. The same Ghost Controls board that lasts twelve years in Frisco can fail in eight near the Little Elm shoreline because the terminals oxidize and short. That’s why we upsell sealed NEMA-rated control enclosures and stainless hardware on nearly every near-lake repair. It’s not a pitch you’d need in Frisco, but it’s the single best money a Little Elm lakefront homeowner can spend on a gate.
Clay soil shrinkage is tilting the hinge posts out of plumb, which drags the gate leaf off its path and throws obstruction and limit-switch errors on the operator. Little Elm sits on expansive Blackland Prairie clay that shrinks dramatically during extended summer drought and then heaves when fall rains arrive. The post moves, the actuator arm fights the misalignment, and the board shuts down. Fixing it means re-plumbing the post and recalibrating the limits, not just clearing the error code. We do that work for neighborhoods across Little Elm, and we’ll walk your management company through the quote before anyone turns a wrench.
Usually yes. We can stage most slide gate operator replacements or board swaps in a way that keeps the gate running on a temporary keypad or radio override while the work proceeds. The gate may be on a manual hold-open for a few hours, but we coordinate with your HOA’s property manager to schedule it during low-traffic windows if possible. Resident keypad codes stay unchanged unless the operator replacement requires re-enrollment, which we do on site and test before we leave. Call (940) 394-8744 with the operator brand and the HOA’s contact info and we’ll give you a straight answer on timing.
If the post looks plumb and the panel still sags, the hinge barrels are worn or the hinge welds have cracked around the post plate. We saw this on a job off Eldorado Parkway near the lake: the hinge post was straight, but a corroded board terminal killed the LiftMaster operator, and the hinge barrels were wallowed out enough to drop the leaf an inch. A sagging gate usually fails at the hinge post, so we always check the post footing first, then the hinge barrels and welds, then the operator. In your case, we’d pull the leaf up, weld new barrels, and re-hang it the same day. The quote comes before any work starts.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate. Serving Little Elm since 2001.