Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Lake Dallas
Gate repair in Lake Dallas usually runs $175-$425 for hinge and post work, $250-$600 for operator and electrical fixes, and $350-$900 for weld and rust repair on lakefront properties where salt air and humidity have done their worst. Hal Gatewood and his crew get to Lake Dallas the same day in most cases, and the price you hear on the phone is the price on the invoice. Call (940) 394-8744 and a live person answers, day or night.
We know Lake Dallas differently than a company that shows up once and disappears. We know which subdivisions along the Shady Shores side deal with gate posts leaning every spring. We know the older 1950s lake homes west of I-35 still have bare steel hinges that rust through within a few seasons. And we know a gate that sags in the latch side usually isn’t a bent panel. It’s a hinge post that gave up. That’s where we start.
Why Gatewood Fence & Gate Is Lake Dallas’s Preferred Gate Repair Company
Hal Gatewood has run this shop since 2001. The name is on the building, the address is published, and the license number is there for anyone to look up. When you call about a gate dragging on the concrete in Lake Dallas, the person who answers is the person who will be standing in your driveway. Not a call center three states away waiting to upsell you a new gate.
Our Gate Repair work in Lake Dallas comes with a 90-Day Done Right Promise. If the hinge we welded comes loose or the operator we serviced quits again, one call brings us back. No runaround, no fine print. Our Lake Dallas customers tend to keep our number after the first job, because we don’t fix the panel without the post and we don’t swap parts that don’t need swapping.
Calls are answered around the clock, every day. The person who shows up is background-checked and works in a uniform. And every quote is written down and agreed to before any work starts. That’s not a policy. It’s how Hal has run the business for 29 years.
Our Gate Repair Services in Lake Dallas
We repair what other companies want to replace. Most gates in Lake Dallas don’t need to be hauled to a shop. Hal welds on site in your driveway, so the gate stays where it belongs.
Hinge & Post Repair
This is the most common call we get from Lake Dallas. The Blackland Prairie clay under your gate post swallows water every wet season, swells, and pushes the post out of plumb. A sagging gate is almost always a post problem first. On a lakefront property in the Shady Shores section of Lake Dallas, we reset a leaning swing gate whose hinge post had shifted during the spring wet season. Our crew upsized the post footing, added crushed-stone drainage gravel, and rehung the gate with stainless steel hinges before realigning the Viking operator and loop detector. The gate hasn’t moved since.
Gate Realignment
A gate that scrapes the drive or won’t latch is working against a post that moved or hinges that wore oval. We bring the gate back square, shim and weld the hinges, and set the post deeper than the original install. In Lake Dallas, where the clay moves every year, realignment without addressing the footing is a temporary patch. We do it the way that lasts.
Weld & Rust Repair
Lake Lewisville humidity lives in the air here. Bare steel hinges on 1970s lake homes rust through surprisingly fast. We grind out the rot, weld in new steel, and treat the joints so the repair doesn’t become the next failure point. We also re-sleeve and plate cracked tubular steel frames common on older Lake Dallas drive gates. Fix it before the panel cracks through and you’re buying a whole new leaf.
Electric Gate Repair
From a DoorKing pad that stopped opening to a Mighty Mule arm that quit mid-cycle, we run the ground checks and board diagnostics on site. North Texas ice storms coat the photocells and keypads in freezing rain, and we see a spike in seizing operators after every storm that hits Lake Dallas. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lake Dallas
We’re certified to service nine major gate brands, and Lake Dallas customers most often run DoorKing, LiftMaster, and Elite operators on their driveway gates. We keep common boards, arms, and photocells stocked locally so we don’t lose a day waiting on a part from out of state. If your operator is dead, we show up with the tools to find out why and the parts to fix it the same trip, more often than not.
Common Gate Repair Problems We See in Lake Dallas Homes
- Hinge posts heaving out of plumb. Saturated Blackland clay expands every wet season, pushing posts off vertical. A gate that scuffs the driveway in April was usually fine in October. The fix is a deeper footing with drainage gravel, not just new hinges.
- Rusted-through hinges and latches on older lake homes. Houses built in the 1950s through 1980s often still have bare steel hardware. Near Lake Lewisville, that steel doesn’t last. We replace it with galvanized or stainless and weld the repairs on site.
- Operators seizing after ice storms. Freezing rain glazes keypads, photocells, and rack and pinion drives. When a Lake Dallas customer calls the morning after a storm, it’s usually a photo eye that can’t see or a board that shorted when ice bridged a connection.
- Latch-side sag that comes back every spring. The panel looks bent, but it’s the post that moved. Straighten the panel without the post and you’ll fix it twice. We fix the post first, then the panel drops where it belongs.
Pricing for Gate Repair in Lake Dallas, TX
Here’s what Lake Dallas homeowners typically pay when they call us:
- Hinge replacement and gate rehang: $175-$380
- Post reset with new concrete footing: $350-$850, depending on depth and drainage work
- Weld and rust repair on a steel or iron gate: $250-$900, depending on the extent of the rot
- Operator repair or board replacement: $200-$600, including ground checks and programming
- Full gate realignment with hardware adjustment: $150-$400
No trip charge applies anywhere inside the county. We take $40 off any repair over $200, and seniors and veterans get 10% off permanently. If another company handed you a written estimate, bring it in for a free second opinion. Your quoted price is locked down before we touch a single bolt.
We Also Serve Cities Near Lake Dallas
We work all over the Lake Lewisville shoreline and beyond. From Gate Repair in Lake Dallas to Little Elm, Argyle, Flower Mound, and Denton, the same owner shows up and the same promise applies. If you’re outside Lake Dallas proper, call anyway. Chances are good we’re already working a job nearby.
Serving Lake Dallas, TX - Our Local Coverage Area
We’re based in the Lake Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Lake Dallas
The re-hinge fails because the post is still moving. Lake Dallas sits on Blackland Prairie clay that swells dramatically when saturated. Each wet season the clay expands under your post and pushes it off vertical. Re-hinging alone doesn’t address the footing. You need a deeper post set with drainage gravel, and on the Shady Shores and waterfront side of town, you may need it every few years just because of the soil movement. Call (940) 394-8744 for an exact quote and we’ll tell you straight whether the post needs re-footing or just re-hinging.
The humidity near Lake Lewisville means uncoated steel hinges rust through within a few seasons. We install galvanized or stainless steel hardware on Lake Dallas gates, because painted steel won’t hold up to the moisture. Galvanized hinges cost a little more up front, but you won’t be paying for the same repair every two years. For a free assessment of your current hardware, give us a call.
Yes, it’s one of the most common calls we get after a North Texas freeze. Freezing rain coats keypads, photocells, and rack systems, then the thaw lets water drip into connections and boards. We diagnose it on site, replace shorted compontents, and seal the housing so the next storm is less likely to knock it out. Same-day visits are usually available for Lake Dallas customers.
Address the hinge post. The panel almost never bends on its own. A gate sags in the hinge post, not in the middle. When the post leans, the latch side drops and the gate scrapes. Straighten the panel and you’ll be straightening it again next spring. Fix the post and the panel returns to its line. We can tell you which it is with a quick look, no charge for the trip.
Solar operators struggle on shaded lots. Mature oaks and cedar on lakefront properties block the panels, and the battery never fully charges. We can install a larger remote panel, reposition what’s there, or run a low-voltage line to a closer power source. It depends on the layout, but the point is that a solar opener that fails every winter isn’t a lost cause. We’ll look at the lot and tell you what’s actually workable.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lake Dallas since 2001.
Contact Gatewood Fence & Gate
If your gate leans, drags, or won’t open, call Hal. A live person picks up at (940) 394-8744 any hour of any day. You’ll get a straight answer, a fair number, and a written quote before any work starts. In Lake Dallas, that’s what a gate repair company should look like.