Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Cross Roads
Gate motor and opener work in Cross Roads usually starts with the post, not the motor. The Blackland Prairie clay under this part of Denton County swells and shrinks through every wet and dry season, tilting hinge posts and throwing operators out of alignment faster than almost anywhere else in the metro. We’re Gatewood Fence & Gate, and we’ve been repairing, installing, and straightening out gate motors on Cross Roads acreage since long before the subdivisions started creeping north. If your gate is binding, stopping halfway, or not responding, call (940) 394-8744 and a live person will pick up.
Why Gatewood Fence & Gate Is Cross Roads’s Preferred Gate Motor & Opener Company
We’re not a franchise and we don’t run a call center. Hal Gatewood started this shop in 2001, and his name is on the building, the invoice, and every job we do. When you call about a gate motor in Cross Roads, you speak to a person who knows what a pipe-fence swing gate on Fishtrap Road looks like and why it stopped mid-travel. The person who answers the phone is the same person who can tell you whether it’s a post problem or a board problem before we ever roll a truck.
Our Gate Motor & Opener crew services the full stretch of Cross Roads, from the horse properties west of FM 424 down to the newer acreage builds off Collins Road. We carry parts for the brands Cross Roads homeowners actually run: Ghost Controls on solar swing gates, DoorKing on long slide spans, Elite on ranch entries. That means less waiting on a part to ship and more calls finished same day.
Since we’re Cross Roads locals serving the surrounding county, we don’t charge a trip fee inside the county and we quote the price before any work starts. Every repair carries our 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No hemming, no fine print.
Our Gate Motor & Opener Services in Cross Roads
Motor Installation
A new gate motor in Cross Roads has to match the gate, not the other way around. On a one-to-ten-acre lot, that often means a heavier operator than a suburban driveway would ever need. We measure the gate weight, swing or slide travel, and post condition before recommending anything. If the post is soft or already leaning, we tell you up front because a motor bolted to a moving post will fail within a season. New motor installs in Cross Roads typically run $950 to $2,600 depending on operator capacity and whether we’re wiring from the house or setting up solar.
Motor Repair
Most motor repair calls in Cross Roads come down to three things: a board that failed after a power surge, a limit switch that drifted out of adjustment, or a motor that burned out because the gate was binding against a shifted post. We diagnose on site, show you what we found, and give you a straight price before we touch a wire. Board replacements usually run $180 to $450. A full motor swap on a swing gate runs $500 to $1,200 depending on the operator model. We repair rather than replace whenever the motor is still sound; we’ve been doing that since 2001 and it’s saved Cross Roads homeowners thousands over buying new.
Linear Motor
Linear arm operators are common on Cross Roads custom and farmhouse entries, especially where a gate post sits close to the driveway edge and there’s no room for a traditional underground operator. We stock linear arms for Gatewood’s most-serviced brands and keep common replacement parts on the truck. A linear arm installation on a Cross Roads swing gate typically runs $800 to $1,800 including the arm, mounting, travel adjustments, and safety photocell alignment.
Slide Motor
Slide gates on Cross Roads acreage tend to be heavy: pipe-frame, often 16 to 24 feet wide, built to hold cattle in or out. Slide motors have to handle that load every cycle. We install and service slide operators from DoorKing, Elite, and Mighty Mule, and we’re particular about track bedding because the clay here moves. A slide motor replacement on a Cross Roads property runs $1,200 to $2,800 depending on the gate weight and whether we’re adding a battery backup or loop detector.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cross Roads
We service Ghost Controls, DoorKing, Elite, and Mighty Mule among others, and we keep common boards, remotes, photocells, and limit switches for those brands on hand. Cross Roads is far enough from the big parts warehouses that waiting on a shipped component can mean a week with a gate that won’t close. We’d rather have the part on the truck than tell you to wait. If we don’t have it, our parts runner will get it from the DFW supplier network, usually next morning.
Common Gate Motor & Opener Problems We See in Cross Roads Homes
- Post heave from Blackland clay. The soil here swells in spring rains and contracts hard in summer drought, and a corner post can move three inches in two seasons. When the hinge post tilts, the swing operator binds mid-travel and draws heavy amps until the motor overheats. We check post plumb first, every time.
- Ice damage to exposed components. The February 2021 ice storm froze rack-and-pinion drives, keypads, and photocell housings on exposed Cross Roads driveways. Cracked housings let moisture in, and moisture kills boards. We see the aftereffects every winter.
- Solar charging cut short. Cross Roads solar gates face panels coated with pollen and pasture dust through spring and often see cloudy winter weeks where the panel can’t keep the battery above threshold. An undercharged battery is the hidden cause of half the “intermittent” gate complaints we hear.
- Kids, horses, and photocells. Acreage gates carry real traffic: trucks, trailers, riders. When the safety photocell gets knocked out of alignment by a horse bumping the post or a mower clip, the gate either refuses to close or reverses mid-travel. Realigning and sealing the photocell is usually a 30-minute fix.
Pricing for Gate Motor & Opener in Cross Roads, TX
Here’s what Cross Roads homeowners can expect to pay. A gate motor diagnosis and minor adjustment runs $95 to $160. A swing gate motor replacement typically lands between $500 and $1,200 for the operator and labor. Slide motor replacement runs $1,200 to $2,800 because the operators are bigger and the installation is heavier work. Battery backup addition runs $275 to $650 including the battery, charger, and enclosure. A full solar gate opener package for a Cross Roads pipe-fence entry starts around $1,100 and can run to $2,400 depending on gate weight and panel size. The price is quoted and agreed before any work starts, you’ll know the number before we turn a wrench. And Cross Roads seniors and veterans get 10% off every job, permanently.
We Also Serve Cities Near Cross Roads
If your gate sits just outside Cross Roads, we work those roads too. Our crews serve Denton, Argyle, Flower Mound, and Little Elm with the same no-trip-charge, upfront-pricing approach. You get the same live person on the phone at (940) 394-8744 whether the gate is on a Cross Roads acreage lot or a Flower Mound cul-de-sac.
Serving Cross Roads, TX - Our Local Coverage Area
We’re based in the Cross Roads area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Cross Roads
Nine times out of ten it’s the hinge post, not the motor. Cross Roads sits on Blackland Prairie clay that heaves and shifts with every wet-dry cycle, tilting corner posts and making the gate bind mid-swing. The operator’s current sensor trips because the motor is working harder, and the gate stalls. We check post plumb before we ever condemn a motor. Call (940) 394-8744 and we’ll come put a level on it.
Yes, and most Cross Roads acreage gates are good candidates because running mains power 600 feet down a driveway costs more than the operator. A solar gate opener works on a pipe-fence swing gate as long as the panel gets clean southern exposure and the battery is sized for cloudy North Texas winters. We install Ghost Controls and Mighty Mule solar setups regularly in Cross Roads and can show you what’s worked on comparable gates nearby.
You set the track on a deeper, better-drained bed than the original builder used. Cross Roads clay moves, and a track poured on a thin gravel base will heave and pinch the rollers. We reset slide tracks with a thicker compacted base and check that the drive chain or rack still runs square. If the gate has already started grinding, get it looked at sooner than later so the motor doesn’t burn out.
We do. Long driveways in Cross Roads mean you can’t always hear a vehicle at the gate, so intercom integration with the gate motor gives you a call button at the entry and a handset or phone app at the house. We wire the intercom into the gate operator so you can talk to whoever’s at the road and open the gate without walking down a 400-foot drive. Typical intercom integration with a Cross Roads gate motor runs $650 to $1,400.
Automatic gate operators anywhere in Texas are required to have a listed entrapment protection device, generally photo-eyes or contact edges, and Cross Roads follows the same UL 325 standard. That’s federal code that applies to every automatic gate installed since 2000. We install and align both on every motor job and test them before we leave. Call (940) 394-8744 and we’ll check your sensors while we’re out.
Contact Gatewood Fence & Gate in Cross Roads
If your gate motor is binding, stalled, or dead, call (940) 394-8744. You’ll get a live person, a straight answer, and a free estimate. We serve Cross Roads acreage, ranchettes, and custom homes with gate motor repair, installation, solar setups, and battery backup. Hal Gatewood’s name is on the work, and every job carries the 90-Day Done Right Promise. The estimate is free and the price is set before any work begins.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Cross Roads and Denton County since 2001.