Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Cross Roads
Gate access control in Cross Roads, TX typically runs $175 to $2,800 depending on the system: a basic keypad entry install starts around $175-$350, a video intercom on an acreage gate lands between $900 and $2,200, and a full smart-access package with remote management usually falls in the $1,500 to $2,800 range. We install and repair it all, and we’ll have a live person on the phone when you call (940) 394-8744. Hal Gatewood has been running this shop since 2001, and when we take a call from Cross Roads, we know we’re heading into horse-property country where a gate isn’t a convenience, it’s the front door to a working property.
What separates this town from the slab subdivisions down in Frisco isn’t just the lot sizes. It’s the dirt. Cross Roads sits on Blackland Prairie clay that swells when it’s wet and shrinks hard when it’s dry, and that movement doesn’t just crack driveways: it pushes gate posts out of plumb season after season. Before we touch a single wire or keypad, we check the post. That habit, learned from years of chasing intermittent access failures across Denton County acreage, is why our repairs in Cross Roads tend to stay repaired.
Why Gatewood Fence & Gate Is Cross Roads’s Preferred Gate Access Control Company
Cross Roads homeowners call us because the name on the shop is the same guy who shows up. Hal Gatewood founded Gatewood Fence & Gate in 2001, and he still answers the phone, still welds on site, and still stands behind every job with a written 90-Day Done Right Promise. That means something in a community like Cross Roads, where people check who they’re hiring before they open the gate.
Our customers in Cross Roads regularly mention the same two things: the crew shows up when promised, and the estimate on paper matches the invoice. We don’t pull the phone-quote-then-door-quote routine that the big national outfits are known for. The price gets quoted and agreed before any work starts, every time. And because we stock parts for LiftMaster, BFT, Linear, Viking, Ghost Controls, and four other major brands, we’re not waiting on a warehouse in another state to get your gate working again.
We’ve handled access control on everything from simple pipe-panel ranch gates to custom ornamental iron work that cost more than most cars. Cross Roads has both ends of that spectrum on the same road sometimes. That range of experience means we don’t flinch at a heavy bespoke swing gate with a matched intercom and camera system, and we don’t over-engineer a straightforward keypad job. Both get the same standard of work.
Our gate access control team serves Cross Roads with the same owner-operated accountability that built our reputation across Denton County. A live person answers our phone 24/7, not a voicemail, not a call center three time zones away. When your gate won’t open at 6 a.m. and you’ve got horses to feed, you get Hal or one of his crew on the line.
Our Gate Access Control Services in Cross Roads
Access control isn’t one thing: it’s the layer between your driveway and everyone who might drive down it. In Cross Roads, where parcels run one to ten acres and a gate often sits 200 feet or more from the house, that layer has to work every time. Here’s what we install and repair most often.
Keypad Entry
A keypad on a Cross Roads gate gets more weather abuse than one on a suburban garage. Ice storms, summer heat that bakes the housing, and the constant fine dust off the clay roads all take a toll. We install weather-sealed keypads rated for direct sun exposure and below-freezing nights, and we wire them to operators from BFT, Linear, and LiftMaster. A standard single-gate keypad install in Cross Roads runs $175-$350, including programming and a test of the whole open-close cycle.
Video Intercom
Long driveways are the norm here, not the exception, and nobody wants to walk out to the gate every time a trailer pulls up. A video intercom lets you see and speak to whoever’s at the entry from your kitchen or your phone. On Cross Roads acreage lots, we typically recommend intercoms with wide-view cameras and night vision, because the gate often has no light beyond what the headlights bring. Installs run $900-$2,200 depending on whether you want a dedicated indoor monitor, smartphone app access, or both. We’ve added video intercoms to heavy ornamental swing gates without compromising the gate’s look or balance.
Phone Entry
Phone entry systems let you buzz someone in by calling your cell, whether you’re in the barn or at the feed store. They’re popular with Cross Roads residents who have ranch hands, farriers, or delivery drivers coming and going. We install cellular-based phone entry units that don’t need a landline, and we configure the access lists so you control exactly who can open the gate and when. Expect $400-$900 for a solid phone entry setup, including programming.
Card Reader
Card readers make sense when multiple people need gate access without sharing a keypad code: family members, employees, boarders if you run an equestrian operation. We install standalone card readers and integrate them with existing operators. Every card gets assigned individually, so revoking access is a two-minute programming task, not a keypad code change that everyone has to memorize. Card reader installs in Cross Roads run $300-$800 per reader, plus cards.
We also handle Gate Access Control beyond these four: Smart Access systems that integrate with your home automation, and retrofits of older operators to accept modern entry control. If your current setup is fighting you, call (940) 394-8744 and tell us what it’s doing. We’ll give you a straight answer.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cross Roads
We’re certified to service nine gate brands, and in Cross Roads we see a lot of BFT, Linear, and Viking on the acreage properties, plus Ghost Controls on many of the solar-powered ranch gates. We stock common parts for these brands locally, which saves Cross Roads customers days of waiting on a shipped component. Hal welds on site, fabricates brackets when a factory part won’t fit the gate, and doesn’t believe in replacing a $900 operator when a $40 part and some adjustment will do the job. That repair-first mindset is why people drive from Denton and Argyle to our shop with gate parts in the truck bed.
Common Gate Access Control Problems We See in Cross Roads Homes
- Post heave from Blackland Prairie clay. The ground under your gate moves with every wet spring and dry August, and a post that’s drifted just an inch or two out of plumb will cause the gate leaf to bind, the safety sensors to trip, and the operator to shut down intermittently. Until the post is reset, no keypad or loop detector adjustment will hold.
- Frozen keypads and photo-eyes after ice storms. The February 2021 event froze keypad internals and photo-eye lenses on exposed rural driveways all over Cross Roads, locking owners out or disabling the entrapment protection. Weather-sealed housings and heated enclosure options prevent the repeat, and we keep the common replacement parts on the truck.
- Loop detector drift on long driveway slide gates. As the clay shifts, the wire loop buried in the driveway moves, and the detector loses its sensitivity. The gate stops opening for arriving vehicles, or opens on its own at 2 a.m. We re-tune or replace the loop, then re-sync the whole access system.
- Misaligned safety photocells on heavy swing gates. A heavy ornamental gate that’s out of balance puts constant strain on the operator and the photocell alignment. The gate creeps, the sensor thinks something is in the way, and the access control fails intermittently. We re-hang the gate, reset the post if needed, and recalibrate everything as one system.
Pricing for Gate Access Control in Cross Roads, TX
Here’s what Cross Roads homeowners can expect, straight numbers:
| Service | Typical Range in Cross Roads |
|---|---|
| Keypad entry install (single gate) | $175 – $350 |
| Card reader install | $300 – $800 per reader |
| Phone entry system | $400 – $900 |
| Video intercom with smartphone app | $900 – $2,200 |
| Smart access full package (remote management, multi-user) | $1,500 – $2,800 |
| Access control diagnostic and repair | $95 – $450 (parts quoted separately, approved before work) |
Every price above gets quoted and agreed in writing before any work starts. No surprises at the door, no revised invoice. You also get $40 off any repair over $200, a free second opinion on any written estimate from another company, and a permanent 10% discount for seniors and veterans. Call (940) 394-8744 for a free estimate, and we’ll give you a number you can plan around.
We Also Serve Cities Near Cross Roads
Our trucks serve Cross Roads and the surrounding Denton County communities, including Denton, Argyle, Flower Mound, and Little Elm. If you’re on the edge of Cross Roads and your gate is a few minutes down the road into a neighboring town, call us anyway. Chances are good we’re already out your way, and the same live-answer phone and 90-Day Done Right Promise apply no matter which side of the county line you’re on.
Serving Cross Roads, TX - Our Local Coverage Area
We’re based in the Cross Roads area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Cross Roads
Because the post itself has likely moved, not the operator. Blackland Prairie clay shifts with seasonal moisture, and a hinge or corner post can drift out of plumb enough to bind the gate leaf and trigger false entrapment stops. In Cross Roads the first repair step is always a post-plumb check; if the post has tilted, no control adjustment will hold until the footing is reset. Call (940) 394-8744 and we’ll check the post before touching a single wire.
Yes, and we’ve done it many times on custom iron gates across Cross Roads. The work includes mounting the intercom station, running power or solar, syncing the app, and crucially, re-balancing the gate so the added hardware doesn’t strain the operator. On gates where the post has already moved, we reset and re-hang first, then install the intercom. Expect $900-$2,200 depending on camera type and app integration.
Not if it’s properly sealed and, in some exposed Cross Roads locations, installed in a heated or insulated enclosure. The February 2021 storm cracked keypad internals and killed photo-eye sensors on dozens of rural driveways across Denton County. We replace failed units with weather-sealed models rated for direct exposure and install them with drainage and UV protection. Call (940) 394-8744 for an assessment before the next freeze.
On Cross Roads acreage properties, clay movement shifts the buried wire loop, changing its sensitivity and causing intermittent detection failures. Sometimes the loop needs re-tuning, sometimes the wire has been damaged by that same ground movement and needs replacement. We diagnose it on site, and the repair typically runs $250-$450. Call (940) 394-8744 to schedule a visit.
The entrapment protection sensors on your gate, the photo-eyes and the reversing mechanism, must be positioned and calibrated so the gate stops and reverses if anything is in the closing path. After any access control repair in Cross Roads we verify the full safety loop: sensor alignment, force settings, and photo-eye operation. A gate that closes on a person or animal is a liability on a working property. We don’t leave until the safety system tests clean. Call (940) 394-8744 if you’re unsure about your current setup.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Cross Roads and Denton County since 2001.