Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Krum
When your driveway gate stops working in Krum, you don’t need a national call center. You need a repair crew that knows Denton County clay, knows what spring storms do to a solid infill panel, and can get to your property without a three-day wait. Gatewood Fence & Gate has been owner-operated since 2001, and we answer the phone with a live person 24 hours a day. Hal Gatewood’s name is on the shop, and his crews work the same rural roads you drive every day. For gate repair in Krum, call (940) 394-8744 and talk to a real person who can schedule a visit this week.
Krum gates fail differently than gates in Plano or Frisco. The soil here moves. The wind here hits harder on open acreage. And the mix of old ranch fencing and newer automated entry systems means every service call starts with figuring out what somebody installed, when, and whether the post base ever stood a chance. That’s the work we do.
Why Gatewood Fence & Gate Is Krum’s Preferred Gate Repair Company
We’ve repaired enough gates off FM 1173, along Masch Branch Road, and through the acreage lots east of town to know what Krum homeowners are up against. The shrink-swell clay under this part of Denton County doesn’t just settle. It heaves. A door that latched clean in October drags the strike by March. A swing gate that cleared its track in summer grinds by winter. We start every repair in Krum by checking the post base, because that is where the problem starts, not the middle of the panel.
Homeowners in Krum call us after another company already replaced the hinges and swore it was fixed. Then the same gate sags again after two wet seasons. Hal’s crews fix the post first, set it in reinforced footing, and only then does the hinge work matter. That is the 90-Day Done Right Promise working the way it should: if it is not right, one call brings us back. No runaround, no arguing about who tightened what.
We are not a franchise with a rotating roster. Hal Gatewood has been at this since 2001. His published address and license number are out there for anyone to check, and his crews are background-checked and uniformed. When the same person shows up to quote and then does the work, the accountability is simple. The name is on the shop, and the shop is in this part of Texas, not three states away.
Our Gate Repair Services in Krum
Electric Gate Repair
Electric and automatic gate systems around Krum take a beating from power surges during spring storms and from the constant strain of an operator cycling against a gate that no longer sits square. A LiftMaster or Mighty Mule opener that hums without moving is often fighting a post that shifted, not a dead motor. We test the operator load first, then the alignment, then the circuit board or limit switches. In Krum, we regularly replace limit cams and reset travel stops after storms because the gate arm got bent or the closing force sensor tripped and was overridden too many times.
Automatic Gate Repair
Automatic driveway gates are common on the newer rural-residential subdivisions built around Krum since the 2010s. A sliding or swing operator on a two-acre lot has to cycle dozens of times a day, in heat, cold, and mud. We service and repair the major brands on these systems including LiftMaster, FAAC, and DoorKing, and we carry common replacement parts with us so one visit usually finishes the job. If your operator runs but the gate is slow, grinding, or reversing mid-cycle, that is a track or limit issue, and it needs calibration before the board burns out trying to compensate.
Hinge & Post Repair
The biggest single cause of gate failure in Krum is a hinge post heaving out of plumb. Denton County’s shrink-swell clay soaks up spring rain, expands, and pushes the post sideways. Then July bakes it dry and the post settles at a new angle. Fix the hinge without stabilizing the post and you’ll fix it twice. We set posts in concrete collars or sleeved footings, rehang the gate with proper sag correction, and check weld integrity at every pivot point.
Gate Realignment
A sagging gate drags the latch, strains the motor, and eventually cracks the welds or shears hinge bolts. Realignment in Krum is not a fifteen-minute adjustment. It means checking the post plumb in both planes, correcting the operator’s travel limits, and often reinforcing the post base so the same clay movement doesn’t undo the work by next spring. We routinely pair a realignment with post stabilization so the gate closes cleanly against the keypad without forcing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Krum
Our crews are certified to work on nine major gate brands, including DoorKing, Elite, LiftMaster, and Mighty Mule. That matters in Krum because a lot of newer automated systems were installed with whatever brand the builder happened to use. If you have a FAAC or Viking operator from an older install or a Ghost Controls retrofit on a ranch gate, we service those too. We keep common control boards, limit switches, and remote transmitters on hand so we aren’t making you wait another week on a parts order. If we don’t have the part on the truck, we tell you that before we ever turn a wrench.
Common Gate Repair Problems We See in Krum Homes
- Post heave from shrink-swell clay. Krum sits on some of the most active clay soils in Denton County, and posts shift inches out of plumb within a single wet-dry cycle. A gate that drags or won’t latch is almost always sitting on a post that moved.
- Wind damage to solid infill gates. Spring severe weather brings gusts that push a solid steel or wood-infilled gate against its operator. The gate arm bends, the rack and pinion strips, or the operator’s internal gears shred while the motor keeps trying to close.
- Freeze-thaw cracks in older welded ranch gates. Ice storms and hard freezes pop weld joints on aging steel gates, especially where moisture has been working into the seams for years. These gates often need on-site welding to hold together long-term.
- Saturated post footings after heavy rain. When the clay finally softens after a long dry stretch, a post set in a shallow footing sinks or tilts, leaving the gate sagging into the mud and the latch strike pointing at nothing.
Pricing for Gate Repair in Krum, TX
A basic hinge and latch adjustment on a swing gate in Krum runs $150 to $280 depending on how far out of square the gate has moved. A post reset with concrete collar sleeve typically lands between $350 and $600 when the post needs to be dug out, re-plumbed, and re-set. Automatic gate repairs run from $180 for a simple limit switch or remote reprogram up to $500 to $900 if a control board or gearbox on a LiftMaster or FAAC operator needs replacement. Solid infill gate panel repairs after wind damage usually fall between $250 and $650 depending on weld work and panel straightening.
You get the total price before we start. Not an estimate that changes at the door. If you have a written estimate from another company, bring it to us for a free second opinion. And remember the standing offers: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (940) 394-8744 for a free estimate.
We Also Serve Cities Near Krum
If you live outside Krum but need Gate Repair in the surrounding area, our crews work across Denton County and into the smaller towns nearby. That includes Ponder, Denton, Argyle, and Lake Dallas, plus the rural acreage between them. We schedule service around the same roads and the same weather you’re dealing with in Krum, so the drive time is short and the response is quick.
Serving Krum, TX - Our Local Coverage Area
We’re based in the Krum area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Krum
Your gate keeps drifting because the shrink-swell clay under Krum expands and contracts with wet-dry cycles, moving the hinge post a little every season. The fix that actually lasts is a post reset with a concrete collar sleeve or deeper reinforced footing, not just another track adjustment. Call (940) 394-8744 and we’ll check the post base before recommending anything else.
First, locate the manual release lever or pull chain on the operator and disengage it so the gate swings freely by hand, then secure the gate open or closed with a strap or block so it cannot blow in the wind and hurt someone or bend the arm. If you are not sure where the release is or the gate is too heavy to move safely, call us and we’ll walk you through it or come out. Do not force a gear-driven operator by hand while it is still engaged.
Yes, and it usually does exactly that. Wind loads push a solid panel against its travel stops while the operator is mid-cycle, bending the gate arm, stripping rack teeth, or overloading the motor until it burns out a few weeks later. If your gate took a beating in a spring storm, get the arm and limit switches checked before the operator dies too. Call (940) 394-8744 for a storm-damage inspection.
The hinges were never the real problem. On older ranch gates around Krum, the post footing is shallow and the shrink-swell clay keeps working the post out of plumb, so every new hinge set just masks a moving foundation. We fix the post, reinforce the base, and weld any cracked joints before rehanging the gate so it stays level through multiple seasons.
You can run a gate on remotes alone, but a loop detector is the difference between a gate that closes on a delivery truck and one that waits. On acreage driveways around Krum, we recommend a free-exit loop at minimum so vehicles leaving don’t need to fumble for a transmitter while the wind is pushing the gate toward them. We install and calibrate loop detectors as part of our automatic gate service. Call (940) 394-8744 to talk through what your system needs.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Krum since 2001.