Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Corinth
A gate that won’t close isn’t just an annoyance in Corinth. It’s a broken entry point on a home you depend on, with a garage or driveway now visible to anyone driving through. Gate repair in Corinth mostly comes down to two things people don’t think about until it’s their gate: the black clay under the posts, and the HOA paperwork above them. We handle both. Hal Gatewood has repaired, straightened, welded and re-hung gates here since 2001, and the crew knows which Corinth subdivisions will flag a finish mismatch before the management company even walks out. If your gate is leaning, binding, or the opener quit this morning, call (940) 394-8744 and talk to a live person. We answer around the clock.
Why Gatewood Fence & Gate Is Corinth’s Preferred Gate Repair Company
We’re not a franchise rolling through with a regional truck. Hal Gatewood’s name is on the shop and on every invoice, and his phone number hasn’t changed in two decades. Corinth homeowners call us because we know their streets, their HOA rules, and the particular way their gate posts move in this soil. When you call, you get Hal or someone on his crew. Not a voicemail tree.
Our Gate Repair work in Corinth carries the 90-Day Done Right Promise in writing. If a hinge we hung starts binding again or a weld we laid cracks within 90 days, one call brings us back. No runaround. No “that’s not covered.” We also answer calls 24/7 with a live person, because a gate that won’t secure a backyard at 11 p.m. on a Saturday is not a Monday problem.
Corinth homeowners have told us the same thing for years: they want a face they’ll see again at the hardware store. Hal lives in the area. The shop is published, the license number is verifiable, and the crew shows up in uniform, background-checked, and on time. For a city where most gates sit in HOAs with architectural review committees, that kind of local accountability isn’t a bonus. It’s the whole job.
Our Gate Repair Services in Corinth
Electric Gate Repair
Most electric gates in Corinth run on operators from Ghost Controls, DoorKing, or Mighty Mule, and when one quits, it’s usually not the motor. It’s the control board, a dead capacitor, a seized limit switch, or a photocell that got knocked out of alignment. We carry common boards and parts for all these brands on the truck, so we don’t have to give you the “three days for the part” speech. For Corinth’s 15-to-25-year-old operators in shift clay, our team checks the arm travel and the entrapment sensor on every repair. A gate that closes on a child or a dog is not something we leave to chance.
Automatic Gate Repair
Automatic gates have two failure points in Corinth: the opener and the structure it’s bolted to. When the operator starts grinding or the gate jerks mid-travel, the real problem is often a post that drifted out of plumb and is overloading the motor. We diagnose the whole system, fix the operator and the alignment in one visit, and re-run the force settings so the opener isn’t fighting the gate. If the chain or belt is stretched, we replace it. If the safety eyes are dirty or mis-wired, we reset them. The goal is a gate that opens smoothly without groaning.
Hinge & Post Repair
A gate in Corinth sags in the hinge post, not in the middle, and that’s where we start. The black clay under the post swells and shrinks so aggressively that a post poured at 24 inches will work loose inside a few seasons. We dig it out, sometimes to 36 inches or deeper, set a bell-bottomed footing so the concrete is wider at the bottom than the top, and re-hang the gate on new hinge hardware that matches the original finish. Fix the panel without the post and you’ll fix it twice. In Corinth, we always fix the post first.
Gate Realignment
When a gate starts dragging on the driveway or the latch won’t catch the strike, the gate hasn’t suddenly bent. The posts have moved relative to each other. Gate realignment in Corinth usually means pulling a post back to vertical, re-shimming the hinge leaf, and tensioning the frame so the gate hangs true at both the top and bottom. On welded steel gates, we may cut and re-weld the pickets if the frame has racked, which we do on site, in your driveway, with the gate lying on sawhorses. It stays in your yard. It doesn’t get hauled to some shop in another county.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Corinth
We’re certified to service nine major gate brands, and for Corinth homeowners that matters because your HOA may have specified a particular operator when the community was built. We work on Ghost Controls, DoorKing, Elite, and Mighty Mule openers weekly, along with LiftMaster, FAAC, BFT, Linear, and Viking. The truck carries common control boards, remotes, receivers, photocells, and limit switches so we can often finish an opener repair the same day we look at it. If a part has to be ordered, we tell you that up front, before any work starts, and we don’t charge a trip fee inside the county.
Common Gate Repair Problems We See in Corinth Homes
- Gate post heaving from expansive clay: Corinth sits on the same shrink-swell Vertisol soil that moves every slab in Denton County. After a wet spring, the clay swells and pushes posts up and out of line; after a dry summer, it shrinks and the post leans into the void. A gate that fit flush in March may bind in August without anyone touching it.
- HOA finish mismatches on replacement hardware: Some Corinth communities have a recorded finish schedule that says exactly what black powder-coat, gauge of iron, and picket spacing is allowed. A new hinge with the wrong texture or a replacement latch in oil-rubbed bronze instead of flat black can trigger a redo. We match the approved finish before we install, not after the management company rejects it.
- Heat-stressed operator boards on shared community gates: Corinth summers push past 100°F, and gates in full sun can cook a control board housed in a metal cabinet. The early-2000s boards in many gated communities are failing on hot afternoons, leaving residents stuck outside the single slide gate. We replace the board and often add a shaded enclosure or venting so it doesn’t happen again in July.
- Ice-storm weld cracks and seized locks: The February 2021 ice storm caught half of North Texas off guard. On ornamental iron gates across Corinth, water got into hairline rust cracks, froze, and split the metal. We weld those cracks shut on site, grind them smooth, and repaint to match the existing finish so the repair doesn’t look like a patch job.
Pricing for Gate Repair in Corinth, TX
A typical hinge and post reset in Corinth runs $275-$480 depending on how deep we have to dig and how much the post has moved. Gate realignment usually falls between $150-$320. Electric gate repair, like a dead control board or a bad receiver, runs $190-$390 for most opener brands, with the part included. A full operator replacement on an automatic driveway gate typically runs $850-$1,600, installed and programmed, depending on the model and whether we have to run new safety eyes or a new wire run. Welding repair is quoted by the weld, with most crack repairs landing between $80-$180.
Every quote is given in writing before we start, and the price doesn’t change at the door. You get $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate you’ve already gotten from someone else. Seniors and veterans get 10% off, permanently. Call (940) 394-8744 and we will quote it over the phone if we can, or come look at it for free.
We Also Serve Cities Near Corinth
We handle gate repair all around the Denton County area, including Corinth, Denton, Argyle, Flower Mound, and Little Elm. Same crew, same truck, same 90-Day Done Right Promise. If you’re a few minutes up the road, the drive is on us.
Serving Corinth, TX - Our Local Coverage Area
We’re based in the Corinth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Corinth
Yes, in many Corinth subdivisions it does, and we can tell you whether yours is one of them. Some communities require architectural review for any change to gate height, picket spacing, finish color, or the operator model, while others only require approval for full replacement. The fastest way to find out is to pull your community’s recorded finish schedule, or call your management company. We regularly work directly with management companies in Corinth, and we’ll match the approved powder-coat and hardware spec so the walkthrough passes the first time. Call (940) 394-8744 and describe the gate; we’ll tell you what your HOA likely requires before we ever touch a hinge.
Because your gate post is sitting in expansive clay that never stops moving. Corinth’s soil is Vertisol, a black clay that swells when it rains and shrinks hard during droughts, which pushes posts out of plumb on a near-seasonal cycle. If the post was installed with a shallow footing, the movement will be worse and faster. The permanent fix is to over-excavate the post hole, pour a bell-bottomed concrete footing below the frost and shrink-swell zone, and reset the hinge post. That’s a half-day job in most Corinth yards, and it stops the annual realignment circuit. Call (940) 394-8744 for an exact quote.
Yes. We carry a range of black and bronze powder-coat finishes in the truck, and when a community uses a specific manufacturer’s color code, we order it and match it before we install. In a few Corinth subdivisions we know the recorded finish schedule by heart because we’ve done so many repairs there. If your HOA has a written finish spec, bring it to the estimate, and we’ll match it exactly; no mismatched hardware that gets flagged a week later. Call (940) 394-8744 to schedule a free look.
Yes, and we do it regularly in Corinth. We’ll meet the management company on site, diagnose the failed board or operator, and give a written quote for the repair or replacement. For shared slide gates, we also check the safety loops, the photoelectric eyes, and the reversing edge so no one gets caught in an entrapment situation. If the HOA wants the board model specified in their architectural guidelines, we’ll match that model or obtain a variance in writing before we install. Call (940) 394-8744 and we’ll coordinate with your property manager directly.
Yes. Any automatic gate operator installed or serviced in Texas must comply with federal UL 325 entrapment protection requirements, which means working photoelectric sensors, a properly set reversing edge, and force settings that stop and reverse the gate when it hits an obstruction. On older operators in Corinth, the safety systems are often disconnected or failed, and we won’t leave a gate running without them. We test the entrapment protection on every automatic gate repair, and if it’s not working, we replace it as part of the job. Call (940) 394-8744 if your gate closed on something it shouldn’t have; we’ll come check it the same day.
Call Gatewood Fence & Gate for Gate Repair in Corinth
If your gate is leaning, dragging, stuck open, or the opener is dead, call (940) 394-8744. Hal Gatewood has been fixing gates in this area since 2001, and a live person will answer. We quote in writing, we show up when we say we will, and every job carries the 90-Day Done Right Promise. No voicemail, no call center, no surprise invoice. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Corinth since 2001.