Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Oak Point, TX
If your automatic gate stopped cooperating this week, you aren’t alone. Oak Point’s master-planned neighborhoods are reaching that 15-to-20-year mark where the original builders’ gate systems, from entry posts to motors to hinge welds, are hitting their first major repair cycle all at once. Gatewood Fence & Gate handles gate repair in Oak Point with a live person answering the phone at (940) 394-8744, any hour, and Hal Gatewood himself still shows up to look at the gate before anyone quotes you a number. You get a written price before work begins, and the job stays in your driveway. That part matters here.
Pricing for gate repair in Oak Point typically runs $180-$460 for most jobs, and we never change the number at the door.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Oak Point Homeowners Choose Gatewood Fence & Gate
Oak Point sits on Lake Lewisville’s shoreline, bounded by master-planned communities like Pecan Square, Wildridge, and Lakewood Shores, where wrought iron and steel slide gates are standard at the end of 70-foot driveways. When a post rocks out of plumb from black clay heave, or a motor burns out after binding against its rack, homeowners here call someone whose name they can verify. Hal’s name is on the shop, and the shop’s address is published, not hidden behind a routing queue. Customers in Oak Point know where to find him. That’s the point.
We show up when we say we will. Every job leaves with the 90-Day Done Right Promise in writing: if the repair isn’t right, one call brings us back, no runaround, no second invoice. Calls are answered by a live person around the clock, the same person you’ll see at the hardware store.
Gate Repair Services We Offer in Oak Point
Here’s what Oak Point homeowners call us for, week in and week out.
Gate Repair
Most gate failures in Oak Point aren’t the panel’s fault. The post shifts in clay soil, the hinge side drags, and the motor tries to compensate until it gives out. We fix the post, then the gate – in that order, because reversing it means you’ll pay twice. Learn more about Gate Repair in Oak Point.
Gate Installation
A new gate on an Oak Point property starts with the post holes, not the pretty ironwork. If the footing isn’t deep enough for shrinking-swelling clay, you’ll rebuild the post in three years. We pour for the soil we’re standing on, then hang a gate that will still swing true a decade later. Learn more about Gate Installation in Oak Point.
Gate Motor & Opener
BFT, Linear, Viking, and Ghost Controls operators are common in Oak Point, and we service all of them, plus the rest of the nine major brands we’re certified on. The first thing we check is whether the post has tilted enough to bind the gate, because a new motor on a binding post is a new motor with a short life. Learn more about Gate Motor & Opener in Oak Point.
Gate Access Control
For the HOA-governed communities and private driveway gates throughout Oak Point, access issues usually trace back to a board that has corroded in lakeside humidity, or a relay that no longer closes. We replace and re-program on-site, test every entry code and remote, and don’t leave until the gate opens for every vehicle that should get through, and none that shouldn’t.
Gate Parts & Welding
We weld on-site. Not in a shop, not “sent out.” If your gate has a cracked weld at the hinge or a sagging corner, the fix happens in your driveway, with the gate still on its posts. That’s the repair-first approach: keep good steel, replace only what’s actually failed. Learn more about our home services.
Neighborhoods We Serve in Oak Point
We’re on Oak Point roads weekly. If you live along Marina Circle near the marina, up in Wildridge, in the newer builds east of Pecan Drive, or back in Lakewood Shores, you’ll see our truck when we’re there. Typical response time for Oak Point gate repair is same-day or next-morning.
- Wildridge
- Pecan Square
- Lakewood Shores
- Marina Circle area
Why Oak Point’s Climate & Housing Affect Gate Repair
Oak Point’s gate failures follow a pattern you don’t see in landlocked suburbs. The Denton County black clay under your fence post swells after a wet October and shrinks in August, and the post doesn’t care whether it was set in 2008 or 2018 – it moves anyway. We see it constantly: the gate starts scraping the driveway, the opener strains, the board overheats. By the time it won’t close, the operator is often burned out, but the root cause is a post a half-inch out of plumb.
Now add Lake Lewisville humidity sitting on every unpainted weld and every control board. Rust creeps into hinges and bolt holes faster than it does ten miles inland, and motors on iron slide gates corrode from the inside out. That’s why Oak Point’s repair demand is so concentrated: the housing stock all turned 15-20 years old at the same time, and the lakeside air has been working on it every day since.
Pricing for Gate Repair in Oak Point
Here’s what we charge to fix gates in this part of Denton County, and the price you get is the price on the invoice:
- Service call inside the county: Free (no trip charge, period)
- Hinge re-weld and re-alignment: $180-$340
- Post re-plumb (clay heave fix): $220-$460
- Operator or control board replacement: $320-$680, brand-dependent
- $40 off any repair over $200
- Permanent 10% discount for seniors and veterans
Before any work begins, Hal gives you a written quote. You agree to it, we do the job, and then we leave. If another company gave you a written estimate, bring it out; we’ll give you a free second opinion.
Service Area - Cities Near Oak Point
Gatewood Fence & Gate works throughout the Lake Lewisville corridor and southern Denton County. You’ll find us in Denton, over in Argyle, through Flower Mound, and down near Little Elm.
Serving Oak Point, TX - Our Local Coverage Area
We’re based in the Oak Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Oak Point
Most gate repairs in Oak Point land between $180 and $460, depending on whether the post, hinges, or operator failed. Hinge re-welds start around $180, post re-plumbing runs $220-$460, and a replacement operator for BFT, Linear, Viking, or Ghost Controls systems typically falls between $320 and $680. Call (940) 394-8744 for an exact quote – estimates are free, and the price is locked before we lift a tool.
Yes. We run same-day and next-morning gate repair routes through Oak Point, and a live person answers the phone 24/7 to get you on the schedule right then. Call (940) 394-8744 and tell us what the gate is doing; we’ll tell you when the truck will be in your driveway.
In Oak Point, the answer is usually the clay. When the post moves, the gate binds against the rack or the ground, and the motor draws more current until the control board or motor fails. Swapping the operator without re-setting the post just cooks the new one within a season. Hal checks the post first, every time.
Yes. For the controlled entry gates common in Oak Point’s HOA communities, we service and replace access control boards, keypads, remotes, and safety edges, and we test the full cycle before we leave. The same 90-Day Done Right Promise covers that work in writing.
We’re certified to service nine major brands, including BFT, Linear, Viking, Ghost Controls, LiftMaster, FAAC, DoorKing, Elite, and Mighty Mule. If your gate runs on something else, call anyway; Hal has been fixing gates since 2001 and there isn’t much he hasn’t opened up.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Oak Point and the Lake Lewisville corridor.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Oak Point Customers Say
"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth