Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Oak Point
Gate repair in Oak Point usually costs $185-$520, and most hinge, post, and realignment jobs we complete the same day we look at them. If you live off Oak Point Drive, in Shahan Lakeview, or anywhere along the Lake Lewisville shoreline, you already know the battle: clay soil heaves posts out of plumb, humidity eats through hinges and control boards, and the builder-grade operators from 2005 are failing one after another. We’re a local, owner-operated shop that offers our Gate Parts & Welding in Oak Point on site and fixes the gate in your driveway instead of hauling it off. Call (940) 394-8744 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Oak Point’s Preferred Gate Repair Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop and on every invoice. That’s the oldest accountability there is. When something isn’t right, you can drive to the shop and look him in the eye. Oak Point homeowners tell us the same thing: they called a national outfit, got a price on the phone, and watched it double when the truck pulled up. We quote the price before work starts, write it down, and honor it.
Oak Point is a specific kind of place. The subdivisions are HOA-governed, the lots are bigger, and the gates are mostly wrought iron swing and slide models installed during the 2000s and 2010s. We know what that means because we’re out here every week. The person who shows up at your gate is background-checked, uniformed, and works for Hal directly on Gate Access Control in Oak Point and repairs. We carry parts for the brands Oak Point homes actually use, which means most repairs happen in one visit, not three.
Our Gate Repair Services in Oak Point
Electric Gate Repair
When an electric gate in Oak Point won’t open, won’t close, or opens halfway and quits, the cause is usually not what the last company said it was. We trace the actual fault, whether that’s a burned contactor, a failed control board, or a sensor that lost its alignment after the post shifted. Near Lake Lewisville, moisture creeps into housings and corrodes terminals faster than inland. We diagnose first, explain what we found, and fix only what needs fixing.
Automatic Gate Repair
Automatic gates in Oak Point work hard. They open and close dozens of times daily, often over posts that are slowly tilting out of plumb. A motor that’s fighting a bound gate burns out fast, which is why we never just swap the operator without checking the hinges, the post, and the rack through our Gate Motor & Opener in Oak Point service. We service LiftMaster, BFT, Linear, and Viking systems regularly, and we can usually tell you what’s wrong within the first twenty minutes on site.
Hinge & Post Repair
This is the job that separates a real repair from a parts swap. Oak Point sits on expansive black clay. When the ground swells in wet months and shrinks in August, concrete gate posts move. A hinge post that’s leaned even a few degrees changes the entire geometry of a swing gate. It drags, it binds, and it eats the operator. We re-plumb the post, re-set the concrete footing deeper when needed, and weld the hinges back true. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
A sagging gate rarely sags in the middle. It sags at the hinge post. We see it constantly in Oak Point’s lake-adjacent neighborhoods: a gate that scraped the driveway for six months, then suddenly the opener gave out. Realignment usually means re-setting the post, rebuilding the hinge mounts, and re-tensioning everything so the gate swings true again. It’s not glamorous work, but it’s the work that keeps a gate running for years instead of weeks.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Oak Point
We’re certified to service nine major gate brands, and the ones we see most in Oak Point are LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, and Mighty Mule. LiftMaster dominates the builder-grade installations in the early 2000s subdivisions, which is exactly what we’d expect. We keep common parts for these systems on the truck, so a motor replacement or control board swap in Oak Point usually doesn’t require a second trip. If we need something specific, we say so upfront.
Common Gate Repair Problems We See in Oak Point Homes
- Clay heave tilting posts out of plumb: Denton County’s black clay is brutal. It swells in spring, shrinks in late summer, and moves every post that wasn’t set deep enough. The gate binds, the motor strains, and eventually the operator burns out.
- Lakeside humidity corroding hinges and control boards: Homes within a mile of Lake Lewisville get noticeably more rust on iron hinges and steel motors than the rest of the county. Control board terminals corrode, safety sensors fog, and slide-gate racks snap teeth when rust seizes them.
- Builder-grade operators failing after 15-20 years: Oak Point’s first wave of automated gates went in between 2003 and 2010. Those original operators are now hitting the end of their useful life almost on schedule, and many are failing the same way: slow response, then a dead board.
- Missing conduit and exposed wiring: A surprising number of Oak Point gates were installed without proper conduit for power and safety edges. Wiring runs along the fence line or under landscaping, and near the lake it degrades fast. We repair the wiring and recommend proper conduit so it doesn’t fail again.
Pricing for Gate Repair in Oak Point, TX
Here’s what we see on a typical Oak Point job. A hinge post re-plumb and re-set runs $300-$600 depending on foot depth and concrete work. A gate realignment is usually $185-$350. Electric gate diagnostics and control board replacement lands between $250 and $550. A full operator replacement for a single swing gate typically runs $800-$1,800, depending on the brand and whether we need to re-set the post at the same time. Slide gates trend higher because the rack and pinion replace more often on near-lake properties. Every job gets a written quote before work starts, and we take standing offers seriously: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (940) 394-8744 for an exact number, free of charge.
We Also Serve Cities Near Oak Point
We serve Oak Point and the surrounding communities along Lake Lewisville and north into Denton County. You’ll see our trucks regularly in Denton, Argyle, Flower Mound, and Little Elm. If you’re just outside Oak Point, our Gate Repair team covers your area too, and you can read more about how we serve the region on our Oak Point page.
Serving Oak Point, TX - Our Local Coverage Area
We’re based in the Oak Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Oak Point
Because the real problem is almost always the post, not the motor. Oak Point’s black clay soil heaves with moisture and pushes concrete hinge posts out of plumb. When the post tilts, the gate binds. The new motor has to work against that bind, overheats, and dies, usually within a season. In Shahan Lakeview, we saw a LiftMaster estate gate tripping its safety photocell repeatedly. The photocell was fine. A hinge post had tilted enough to bind the gate. We re-plumbed the post, poured a deeper footing, and replaced the operator. That gate hasn’t failed since. If you’ve replaced an operator more than once, the post is your problem. Call (940) 394-8744 and we’ll confirm it on site.
Yes. We do this often, and it’s cleaner than most people expect. The first thing we check is the post. A manual gate that’s been swinging freely for 15 years might have a hinge post that’s drifted slightly out of plumb, and an automated operator won’t tolerate that. We also check for conduit. Many Oak Point gates went in without power runs, and we’ll recommend running proper conduit so the wiring doesn’t hang exposed along the fence line. Once the post is solid and the power is run, mounting the operator and programming the safety edges is straightforward. Call (940) 394-8744 for a free measure and a written price.
Usually not. Grinding near the end of travel is typically a rack and pinion issue, often caused by rust or misalignment. Near Lake Lewisville, rust seizures on slide-gate hardware happen faster than inland. The pinion teeth can’t engage smoothly, so the motor fights the gate through the last few feet. Sometimes it’s a bent rack or a wheel that’s flattened. We’ll inspect the rack, pinion, and rollers before touching the motor, because diagnosing it correctly saves you from paying for a motor you don’t need. Call (940) 394-8744 and we’ll find the actual fault.
Yes. Every automatic gate in Texas, including Oak Point, is required to have functioning safety entrapment protection: photocell sensors, contact edges, or both. The UL 325 standard governs this, and if your gate doesn’t have working safety devices, it’s not compliant and it’s genuinely dangerous. We test every safety sensor on every job we do, and if yours is missing or defeated, we’ll tell you plainly. We won’t leave a gate operating without proper entrapment protection. That’s a line we don’t cross, and the Gate Repair crew will explain exactly what’s needed.
Every 12 months. Oak Point’s humidity and clay soil mean gates here need more attention than landlocked suburban properties. A yearly inspection catches hinge wear before it binds the motor, checks the post for movement, tests the safety sensors, and clears rust off the hardware before it seizes. Neglecting that maintenance is how a $200 hinge repair becomes a $1,400 operator replacement. We can set up a reminder and come out annually, and the 90-Day Done Right Promise means if something isn’t right after a repair, one phone call brings Hal back, no runaround.
Contact Gatewood Fence & Gate in Oak Point
If your gate is sagging, grinding, stalled, or simply not responding, call (940) 394-8744. A live person answers, 24 hours a day, seven days a week. Hal’s name is on the shop, and the shop is down the road, which is the oldest accountability there is. We’ll quote the price before any work begins, fix what needs fixing, and stand behind it with the 90-Day Done Right Promise in writing. For the fastest response in Oak Point, call us today for a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Oak Point and surrounding Denton County communities since 2001.