Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Bartonville
Gate access control in Bartonville usually means one of two scenarios: a keypad or phone entry system on a long gated driveway, or solar-powered automation on a pasture gate three hundred yards from the house. Both need a technician fluent in rural acreage work, because Bartonville is not a subdivision town. Our crew serves Bartonville every week, and we run service calls from the Dallas-Fort Worth office straight to your gate. Getting a keypad synced to a LiftMaster operator or a Mighty Mule slide motor working again is routine for us. Call (940) 394-8744 and a live person answers, day or night.
Hal Gatewood has been at this since 2001, and the name on the invoice is the same name over the shop door. We work on the gate where it stands rather than hauling it off, and we stand behind every job with the 90-Day Done Right Promise in writing.
Why Gatewood Fence & Gate Is Bartonville’s Preferred Gate Access Control Company
Bartonville homeowners tend to check a company before they call. That works in our favor, because Hal Gatewood’s address is published and his license number is out there for anyone to look up. The person who shows up is either Hal himself or someone from his crew, background-checked and in uniform, driving a truck with the shop name on the door. No subcontractor roulette.
Around here we have lost count of how many times we have been the second call on a gate another company already tried to fix. A homeowner off Jeter Road called us after a national outfit quoted one price over the phone and arrived wanting a few hundred more just to look. That kind of work makes us mad, because it gives the whole trade a black eye. Our price is agreed before work starts, and it stays agreed.
We answer the phone with a live person 24 hours a day, seven days a week. If a pasture gate fails at dawn and the horses are loose, you need a human on the line, not a voicemail. That is how we have always run it.
Our Gate Access Control Services in Bartonville
Bartonville properties rarely have one gate problem at a time. The front entry might have a decorative iron swing gate with a phone entry system, while the back pasture uses a chain-drive slide gate with a basic remote. Our team handles both on the same visit. Below are the access control systems we service most often in Bartonville.
Keypad Entry
Keypad entry systems on Bartonville estates get more weather abuse than people expect. A keypad mounted on a stone pillar off McMakin Road gets full west sun in summer and freezing rain in winter. We install commercial-grade keypads rated for Texas weather and program them to whatever operator is on site, whether that is LiftMaster, DoorKing, or a Mighty Mule on the back gate. We also replace worn keypads that still work sometimes but drop digits when it matters most.
Remote Control
Most Bartonville homes with a gated entrance need more than the two remotes that came in the box. A family with a farm truck, a horse trailer, and two daily drivers often needs six or eight remotes programmed to one system. We clone, program, and replace remotes for all the major brands, and we can set up multi-button remotes that run both the front gate and the pasture gate separately. No trip charge inside the county to get that sorted.
Phone Entry
Phone entry systems let you open the gate from your cell phone, which on a five-acre Bartonville lot means not walking out to the road in the rain to buzz in the vet or the farrier. We install and service phone entry systems that tie into LiftMaster and DoorKing operators, including systems that use a cellular signal when the Wi-Fi at the gate is weak. This is a common request for Bartonville because the gate is often too far from the house for a reliable home Wi-Fi signal.
Card Reader
Card readers make sense for Bartonville properties with staff, boarders, or a steady rotation of delivery vehicles. A proximity card reader mounted at the entry post lets a barn manager get in without sharing a gate code that changes every time a boarder leaves. We install standalone card readers and integrate them with existing operator systems from Linear, Elite, and Ghost Controls.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Smart Access and Video Intercom
Smart access systems have come a long way, and on a Bartonville estate they solve a real problem: seeing who is at the gate before opening it. A video intercom with a smart phone app means you know which delivery truck or which horse owner is waiting at the Jeter Road entrance without walking down there. We install video intercoms that work with existing operators and wire solar-powered units for gates that have no AC power run.
Trusted Brands We Service in Bartonville
We are certified to service nine major gate brands, and we keep common parts in stock for LiftMaster, DoorKing, Mighty Mule, and Elite. That matters in Bartonville because a bespoke ornamental gate operator often takes a proprietary circuit board that generic parts houses do not carry. When a DoorKing board fails on a cold February morning, waiting two weeks for a backordered part is not an option. We keep the parts that fail most often on the truck, and we know which supplier gets the weird ones to Bartonville fastest.
Common Gate Access Control Problems We See in Bartonville Homes
- Posts out of plumb from Blackland Prairie clay. Denton County’s expansive clay soil shrinks and swells with the seasons. A post set in concrete still moves enough to throw a swing gate off its latch and bind a slide gate against its rail. We reset footings and re-shim hinges so the gate hardware stops fighting the ground.
- Solar gate openers failing in cloudy winter stretches. A solar panel on a pasture gate might not charge enough during short, overcast December days. The Mighty Mule or Ghost Controls battery drains and the gate stops mid-open. We upgrade to larger panels, add battery capacity, or run a low-voltage line where practical.
- Circuit boards lost to freezing bursts. The February 2021 winter storm exposed a lot of weak control boards in Bartonville. We replace boards with cold-weather-hardened components and add surge protection where the gate power comes in.
- Wide farm gates dragging after soil heave. A 20-foot slide gate across a pasture entrance has a lot of span to support. When the ground heaves, the gate wheels bind and the motor strains. We re-level the track, re-tension the rack and pinion, and recalibrate the operator so it is not fighting its own weight.
Pricing for Gate Access Control in Bartonville, TX
Here are the ranges we quote for Bartonville work. A keypad entry system installed and programmed runs $425 to $750. Remote cloning or battery replacement runs $55 to $120. Phone entry systems start around $650 and go up to $1,400 with cellular connectivity and a new phone line connection. Card readers run $475 to $900 installed. Solar power upgrades for pasture gate openers run $350 to $800 depending on panel size and battery capacity. A full video intercom with smart access typically runs $900 to $1,800.
What moves a quote is distance from the gate to the nearest power source, operator brand and age, and whether the existing wiring is salvageable. We give a fixed price before any work starts. You approve that number, and that is the number on the invoice. We also knock $40 off any repair over $200, and seniors and veterans get a permanent 10% discount. Call (940) 394-8744 for a free estimate.
We Also Serve Cities Near Bartonville
Our Gate Access Control work regularly takes us to Gate Access Control in Bartonville and the surrounding towns. We serve Denton, Argyle, Flower Mound, and Little Elm. If you are on the edge of Bartonville and one of those communities, we can get to your gate just as fast. Ask about our free second opinion on any written estimate you have from another company.
Serving Bartonville, TX - Our Local Coverage Area
We’re based in the Bartonville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Bartonville
Bartonville sits on Blackland Prairie clay, which expands when wet and shrinks when dry. Concrete footings set in that clay move with the soil around them. The movement is seasonal and it will keep happening no matter how well the gate was installed. We fix it by re-shimming hinges, adjusting the latch, and on a bad year resetting the post with a deeper footing. Call (940) 394-8744 and we will come look.
Yes. Solar-powered gate openers are common on Bartonville pasture gates. We install a panel, a battery bank, and a low-voltage operator sized for the gate weight and span. The key is matching the panel wattage to winter sun hours so the battery never dies mid-week. We quote the full solar system before starting work, and the price is fixed.
They often are in Bartonville. Many estates run both gates on the same long driveway loop, so a single post shift from clay soil contraction can throw off a decorative front swing gate and a ranch slide gate at the same time. We see this every year. A single service call can usually fix both, because we reset alignment and recalibrate each operator in one visit. Call (940) 394-8744 to schedule a look.
We re-level the gate track, re-shim the wheels and rollers, and take the load off the motor. On many Bartonville slide gates the rack and pinion binds when the post moves, and we re-tension that too. Then we recalibrate the operator so it is not working against its own weight. A wide farm gate should roll under motor power without straining, and if it does not, something is out of line.
That depends on the gate. Gate operators installed or serviced to current UL 325 standards include safety edges or photo-eye sensors that reverse the gate on contact. We check every operator we touch for proper safety edges, force settings, and entrapment zones, and we will tell you plainly if a gate does not meet current standards. That is part of the 90-Day Done Right Promise. Call (940) 394-8744 and we will give you an honest read.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bartonville since the day the first gate gave out and it never should have.