Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterWeld & Rust Repair in Denton, TX
Weld and rust repair for residential gates in Denton typically costs between $150 and $450, depending on the severity of the corrosion and whether we can weld on-site or need to reinforce structural members. We handle these repairs right in your driveway, saving you the hassle of hauling a heavy gate to a shop. If your gate is sagging, dragging on the pavement, or the metal frame is flaking away, our Gate Realignment experts can help-call us at (940) 394-8744 to get an honest assessment of whether the metal can be saved or if the structural integrity is too far gone.
Rust isn’t just an eyesore that ruins your curb appeal; it is a slow-motion failure of your home’s security. Here in Denton, our humid summers followed by sudden temperature drops create a cycle of expansion and contraction that eats away at steel and iron gates. When you see orange flakes at the base of your hinge post or near the latch, that metal is already losing its strength. We have been providing reliable Gate Repair in Denton since 2001, and I have seen enough rusted-out frames to know that fixing it early is the only way to avoid buying a brand-new gate system.
At Gatewood Fence & Gate, we don’t believe in replacing parts that still have life in them. If the gate frame is sound but the hinges are tearing away, we weld new steel backing and reinforce the connection. If the bottom rail has rusted through, we cut out the rot, weld in fresh, galvanized steel, and prime it to match. My name is on the shop, and the shop is right here in town. When you call us, you aren’t getting a call center three states away; you are getting a team that knows exactly how the soil and weather in Denton affect your property.
When You Need Weld & Rust Repair
It is easy to ignore a little rust until the gate stops latching or starts dragging across your driveway. If you notice these specific issues, it is time to have someone look at it before a minor repair turns into a full replacement:
- The Gate is Dragging: If your gate is scraping the concrete, it is usually because the hinge post has rusted at the base or the hinge weld has broken. The gate is literally losing its foundation.
- Visible Flaking or Pitting: If you can run your finger over the metal and it feels like sandpaper or creates flakes, the rust has gone deep. Surface rust can be sanded and painted, but pitting means the material thickness is compromised.
- Hinges Pulling Away: If the metal surrounding your hinge mounting plate is cracked or bulging, the hinge is no longer securely attached to the post. This is a common failure point for heavy ornamental iron gates.
- Latch Misalignment: When the gate frame twists due to rusted joints, the latch won’t line up. You might find yourself having to lift the gate to get it to close, which puts even more stress on the already weak joints.
- Hollow Rail Sounds: If you tap your gate frame and hear a crunch or a hollow, rattling sound instead of a solid “thud,” the interior of the tube is rusted out. This is dangerous because the gate could collapse under its own weight.
If you see these signs, don’t wait for the gate to fall. A gate that isn’t swinging properly puts extra strain on your gate motor-whether you are running a Ghost Controls system or an older Elite unit-so timely Automatic Gate Repair matters. Fixing the metal now protects your operator from burning out prematurely.
Our Weld & Rust Repair Process
We do not believe in taking your gate off-site unless it is absolutely necessary. Most structural welding can be done right in your driveway. This is how we handle a professional weld and rust repair job:
- Assessment of Structural Integrity: I arrive on-site to determine if the metal is salvageable. If the rust has eaten through more than 50% of the wall thickness of the steel, welding might not be safe. I will always tell you the truth, even if it means telling you a repair isn’t the right long-term move.
- Surface Preparation: We grind away the rust and paint down to bare, bright metal. You cannot get a clean, strong weld on top of rust or old, peeling paint.
- Reinforcement and Welding: We use high-quality steel to bridge the gap or reinforce the weak spot. If a hinge has torn out, we weld a new steel plate to the post or frame to create a solid anchor point that is stronger than the original factory attachment.
- Grinding and Smoothing: Once the weld is set, we grind the bead smooth. We want the repair to be as inconspicuous as possible, blending into the original lines of the gate.
- Priming and Sealing: We apply a high-grade, rust-inhibitive primer immediately. Bare metal in Texas humidity will start to surface rust within hours, so we seal it up right away.
- Final Quality Check: We test the swing, the latch, and the tension. Every job we do is backed by our 90-Day Done Right Promise. If it isn’t right, you call me, and I come back to fix it.
Safety is the priority here. If you are dealing with a heavy gate that is falling off its hinges, please stay clear of the area. A falling gate is extremely dangerous. Call us at (940) 394-8744, and we will get someone out there to secure it.
Weld & Rust Repair Pricing in Denton
I believe in upfront pricing. You shouldn’t have to guess what a repair is going to cost. While every gate is different, these are the general ranges for our work in the Denton area. We offer a free second opinion on any written estimate you have already received.
| Repair Type | Estimated Price Range |
|---|---|
| Small Hinge Weld/Reinforcement | $150 – $250 |
| Bottom Rail Rust/Patch Repair | $250 – $450 |
| Structural Frame Re-welding | $350 – $600+ |
Keep in mind that we offer a $40 discount on any repair over $200. We also provide a permanent 10% discount for seniors and veterans. There is no trip charge for customers inside the county. If you have a written estimate from another company, I am happy to look at it for free. If I can do it for less or better, I will tell you. If they gave you a fair price, I will tell you that, too. That is how I have stayed in business since 2001.
FAQs - Weld & Rust Repair
Can you fix my gate if it is dragging on the ground?
Yes, we can usually fix a dragging gate by addressing the root cause, which is almost always a failed hinge or a rusted-out bottom rail. We will weld the hinge back to a solid surface or patch the bottom rail so the gate clears the driveway again. Call (940) 394-8744 to have us take a look.
Is it better to weld the old gate or buy a new one?
It depends on the extent of the rust. If the gate is structurally sound and the rust is isolated to one or two spots, welding is a cost-effective way to get another 5 to 10 years out of your gate. If the metal is “lacy” or crumbling throughout the entire frame, welding is just a temporary fix. I will give you my honest recommendation when I see it in person.
Do you work on gate motors like DoorKing or Mighty Mule?
Yes, we are certified for Electric Gate Repair on nine major gate brands, including DoorKing, Mighty Mule, and LiftMaster. If your weld repair involves moving the gate, we will ensure your operator is adjusted and calibrated correctly so it doesn’t strain the motor after the repair is done.
How long does a weld repair last?
If the prep work is done correctly-grinding to bare metal and using the right primer-a professional weld repair can last as long as the original gate. We stand behind our work with our 90-Day Done Right Promise. If the weld fails or the gate sags again within that window, we make it right, no questions asked.
When your gate fails, you don’t need a corporate brochure or a long wait time. You need someone who can show up, weld the metal, and get your security back in order. We have been serving the Denton area for over 29 years, and we are ready to help. Call us at (940) 394-8744 for a free estimate or to schedule our Gate Repair services.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Denton.