Lock Repair in Denton, TX

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Lock Repair in Denton, TX

When your gate lock stops working, your property’s security takes a hit immediately. In Denton, we see this happen often due to our shifting soil and the intense Texas heat that expands and contracts metal hardware, eventually causing latches to misalign or cylinders to seize up. At Gatewood Fence & Gate, we specialize in fixing these locking mechanisms right in your driveway, rather than telling you to replace the whole system or waiting weeks for parts. Most gate repair jobs we handle in Denton can be completed in a single visit, often for between $120 and $280 depending on whether we are repairing a standard latch, an electronic solenoid, or a magnetic lock system. If you are dealing with a jammed gate, give us a call at (940) 394-8744 for an honest assessment.

I have been fixing gates and locks since 2001, and I have learned that most people don’t need a brand-new gate; they just need someone who knows how to adjust the tension, realign the striker, or replace a worn-out component. When you call us, you aren’t getting a call center or a random dispatcher. You are getting the person who will actually show up at your gate. We handle all types of residential and commercial gate security, ensuring that your property stays secure without you needing to overhaul your entire entry system. We provide this specialized Gate Repair in Denton, and we stand behind every single repair with our 90-Day Done Right Promise. If the latch isn’t catching or the electronic strike is buzzing, we make it right.

When You Need Lock Repair

You don’t always need to replace your gate lock. Often, it is a matter of maintenance or a minor mechanical failure that we can fix on-site. Here are the signs that it is time to call us:

• The Latch Won’t Catch: If your gate swings shut but bounces back open, the latch and the receiver have likely drifted out of alignment due to ground shifting or hinge wear.
• Key Hard to Turn: If you find yourself jiggling the key or using force to get the lock to turn, the internal tumblers are likely corroded or dirty, which is common in our humid Denton summers.
• Electronic Strike Failure: If you press the button on your keypad or remote and hear a buzzing sound but the gate stays locked, the solenoid inside the electric strike is likely failing.
• Gate Sags into the Lock: A gate that drags on the ground often puts so much pressure on the latch that the lock cannot engage, effectively locking you out or leaving you unable to secure the property.
• Keypad Unresponsive: Sometimes the issue isn’t the lock itself, but the connection between your keypad and the lock, which can be caused by frayed wiring or a blown fuse.

Our Lock Repair Process

We do not believe in hauling your gate off to a shop unless it is absolutely necessary. We bring our tools and our experience to your driveway. Here is how we handle a typical lock repair:

1. Assessment of the Alignment: We start by checking the gate’s balance. Nine times out of ten, a lock issue is actually a hinge issue. If the gate isn’t hanging straight, the lock will never line up. We adjust the hinges first to ensure a level swing.
2. Mechanical Inspection: We inspect the latch, the strike plate, and the internal spring mechanisms. We look for rusted springs or bent metal components that have been overworked by wind or heavy use.
3. On-Site Welding or Adjustment: If the strike plate has pulled away from the post, we don’t just tighten the screws. We weld the mount back into place so it won’t pull loose again. This is a permanent fix, not a temporary patch.
4. Testing the Electronics: For systems like Ghost Controls or DoorKing, we test the voltage at the lock. If the solenoid is dead, we replace it with a compatible, high-quality component. If it is just a loose wire, we secure it and weatherproof the connection.
5. Final Verification: Before we leave, we cycle the gate at least ten times. We make sure the latch engages smoothly, the electronic release fires instantly, and the gate closes without needing a push or a pull.

We treat your property like it is our own. Whether you have a simple manual gate or a complex electric gate repair need, we make sure it works before we pack up our truck. If you are ready for a repair that lasts, call us today at (940) 394-8744.

Lock Repair Pricing in Denton

We believe in upfront pricing. You will never be surprised by a bill when we are finished. While every gate is different, we have provided a general breakdown of what you can expect for lock repair services in the Denton area. Remember that we offer a free second opinion on any written estimate you have already received.

We offer $40 off any repair over $200, and seniors and veterans always receive a permanent 10% discount. We also do not charge a trip fee if you are inside the county. If you have a quote from another company, bring it to us, and we will give you a free second opinion. We want to make sure you aren’t paying for work that doesn’t actually need to be done. Call (940) 394-8744 to get an exact quote for your specific gate.

FAQs - Lock Repair

How do I know if I need a repair or a full replacement?

Most of the time, you only need a weld & rust repair or similar fix. We focus on fixing the components that are failing-like the latch, the strike plate, or the solenoid-rather than replacing the entire gate system. If your gate structure itself is sound, we can almost always save the existing lock hardware, which saves you money and keeps your gate original.

Can you fix my gate lock today?

We prioritize urgent calls, especially when a gate is stuck open or closed and compromising your security. Because we are locally owned and owner-operated, we don’t have to wait for corporate approval or dispatch queues. If you call us at (940) 394-8744 early in the day, we can often fit you into our schedule for same-day service.

Do you work on electronic gate locks?

Yes, we are certified to service nine major brands, including Elite, Mighty Mule, and DoorKing. Whether it is an issue with the magnetic lock, the electronic strike, or the keypad controller, we have the tools and parts on our truck to diagnose and fix the electrical issue on the spot.

Is it safe to try and fix a gate lock myself?

Be careful. Many gate locks and latches are under significant tension, and some electronic systems carry enough voltage to cause a nasty shock if you don’t know what you are doing. If you have a heavy automatic gate, there is a risk of it moving unexpectedly while you are working on the lock. If you aren’t comfortable with tools or electrical wiring, it is much safer to have us handle it. Call (940) 394-8744 and let us take the risk for you.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Denton.