Gate Realignment in Denton, TX

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Gate Realignment in Denton, TX

Gate realignment in Denton, Texas, typically costs between $180 and $350, depending on the severity of the sag and whether we need to perform Hinge & Post Repair with on-site welding to reinforce the posts. If your gate is dragging on the concrete, failing to latch properly, or putting strain on your gate motor, we can usually get it back to level and swinging smoothly in a single visit. You don’t have to replace the whole system just because the gate has shifted; often, it is a matter of re-anchoring the post or adjusting the tension, and we handle that work right in your driveway.

I have been fixing gates in Denton since 2001, and I have seen how our North Texas soil shifts with the seasons. When the ground moves, your fence posts move with it. If you are noticing your gate isn’t meeting the latch or the arm is struggling to push the weight, it is likely a misalignment issue. We offer Gate Repair in Denton as our primary service, but realignment is where we really save our neighbors money. Instead of selling you a new gate, I look at why it’s leaning and fix the root cause, whether that is a loose hinge, a rotted post base, or a frame that has lost its square.

You can reach us at (940) 394-8744 if you need someone to come out and take a look. I do not believe in dispatching strangers to your home. When you call, you get a live person, and when we schedule the work, you get me or my crew-the same folks who have been doing this work for years. We stand behind our realignment jobs with a 90-Day Done Right Promise. If it isn’t hanging straight, I will come back and make it right. No runaround, no fine print.

When You Need Gate Realignment

Most homeowners don’t notice a gate is misaligned until it stops closing. The truth is, the gate usually starts showing signs long before it drags on the driveway. Keep an eye out for these symptoms:

• The “Gap” Test: If the gap between your gate and the latch post is wider at the top than the bottom, or vice versa, your hinge post is likely leaning. This happens constantly in Denton due to the expansion and contraction of our clay-heavy soil.
• Dragging on the Driveway: If you see a fresh scratch or a groove in your concrete or pavers, your gate has already dropped. This puts immense pressure on your gate motor, which will eventually burn out the gears inside brands like Elite or DoorKing.
• The “Self-Close” Failure: If you let go of the gate and it swings wide open or slams shut on its own, it is not level. A properly aligned gate should stay exactly where you leave it.
• Latch Misalignment: If you have to lift the gate or push it hard to get the latch to click, you are fighting the frame. This isn’t just an inconvenience; it’s a security risk because the gate isn’t locking properly.
• Visible Stress at the Hinge: Look at the point where the hinge attaches to the post. If you see cracks in the brick, wood, or metal, the gate is pulling the post inward. Fixing the panel without fixing the post means you’ll be fixing it again in six months.

Our Gate Realignment Process

I have been doing this long enough to know that a quick adjustment with a wrench is rarely enough. A gate sags in the hinge post, not in the middle, and that is where we start. Here is how we approach a realignment job at Gatewood Fence & Gate:

1. Assess the Post Integrity: We check if the post is actually leaning or if the hinge bolts have simply worked loose. If the post is moving in the ground, we have to address the foundation before we even touch the gate.
2. Check the Frame Squareness: We use a level to see if the gate frame itself has twisted. If it has, we use on-site welding to add structural bracing or gussets to pull the frame back into a square shape.
3. Adjust or Replace Hinges: Often, the hinge pins wear out. We replace old, worn-out hardware with heavy-duty greaseable hinges that can handle the weight of the gate without binding.
4. Reinforce the Mounts: If the gate is mounted to a brick column or a steel post, we ensure the mounting plate is secured with the correct anchors. We don’t just use screws that will pull out; we use hardware appropriate for the material we are attaching to.
5. Test the Swing and Latch: We verify that the gate swings freely through its entire arc and that the latch engages without any force from you. We won’t leave until it closes under its own weight.

We are certified to service nine major gate brands, including Ghost Controls and Mighty Mule. Whether your gate is solar-powered, electric, or manual, the physics of the hinge remains the same. If it is hanging crooked, it is going to fail. We fix the mechanics of the swing so the motor doesn’t have to work harder than it should.

Gate Realignment Pricing in Denton

We believe in upfront pricing. You shouldn’t have to guess what a repair will cost, and I don’t like surprises any more than you do. Because every gate is different-some are lightweight aluminum, others are heavy iron-I need to see the gate to give you an exact number. For general guidance, see How Much Does Gate Repair Cost? (2026 Price Guide) - Denton, TX. However, here is what you can expect for typical alignment work:

Remember, we have a standing offer of $40 off any repair over $200. If you are a senior or a veteran, you get an additional 10% discount on top of that. We also charge no trip fee inside the county. If you have a written estimate from another company, I will be happy to give you a free second opinion. Often, I find that what other companies call a “gate replacement” is actually just a simple repair that I can handle in a few hours.

FAQs - Gate Realignment

How do I know if my gate post is the problem or the gate itself?

The easiest way to tell is to watch the gap between the gate and the post as you open it. If the gap changes size while the gate is swinging, the hinge post is likely loose or leaning. If the gap stays the same size but the gate drags on the ground, the gate frame itself has likely twisted or the hinges have worn down. Call us at (940) 394-8744 and I can walk you through a quick check over the phone.

Can you fix a gate that has been hit by a vehicle?

Yes, we handle impact damage regularly. If the frame is bent, I can often cut out the damaged section and weld in new steel on-site. This is almost always cheaper than buying a new gate, and it keeps your original gate intact. We have been doing this since 2001, and we have the tools to make it look right again.

Is it cheaper to repair or replace a sagging gate?

In 90% of the cases I see in Denton, it is much cheaper to repair. People are often told they need a new gate because the company they called doesn’t do welding or doesn’t have the expertise to fix a post. We operate on a our Gate Repair services repair-first philosophy. If I think a repair won’t last, I will tell you, but I won’t sell you a new gate if I can fix the one you have.

Do you work on residential gate openers?

Yes, we service and repair gate motors for brands like LiftMaster, Viking, and others. If your gate is misaligned, it will eventually kill the motor because the motor is fighting the friction of the drag. We always realign the gate before we touch the electronics, because if the gate doesn’t swing freely, the motor will just fail again. Call (940) 394-8744 or search Gate Repair Near Me in Denton, TX to schedule an inspection.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Denton.