Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Near You in Denton, TX
When you search for our Gate Repair services in Denton, you are likely looking for someone who answers the phone, shows up when they say they will, and actually fixes the problem instead of trying to sell you a brand-new system. At Gatewood Fence & Gate, I have been repairing gates in this county since 2001, and I answer the phone personally at (940) 394-8744. If you have a gate that is sagging, an opener that won’t engage, or a safety sensor that keeps blinking red, I can come to your property, diagnose the issue, and provide an upfront price before any work begins.
My shop is located right here in the community. I do not run a call center, and I do not pass your information to a third-party dispatch service. When you call me, you are talking to the person who will be standing in your driveway with the welding torch. We handle everything from residential driveway gates to complex access control systems, and we are proud to offer a 90-Day Done Right Promise in writing on every single job we touch.
Fast, Local Gate Repair
Most gate problems are not mysteries. They are usually caused by three things: Denton soil shifting, simple mechanical wear, or an electrical component that has finally given up. Because I have been working in this area for over 29 years, I know exactly how our local soil density affects post-alignment. If your gate is dragging, the problem is rarely the motor itself; it is almost always the Hinge & Post Repair or the gate frame integrity. I specialize in on-site welding, which means I can fix the structural issues of your gate right where it stands. You do not need to wait for a manufacturer to ship a new part or haul your heavy gate off to a shop.
I prioritize urgent repairs because I know a stuck gate is a security risk. Whether you are in Gate Repair in Denton, Argyle, or Krum, I aim to provide a response time that respects your schedule. I am not a national franchise with a complicated dispatch queue. I am a local owner-operator. When you call (940) 394-8744, you get a live person who can tell you exactly when I can be there. We serve the entire Denton area, and we never charge a trip fee for jobs within the county. If you have a written estimate from another company, I am happy to provide a free second opinion so you know if you are being sold a repair you actually need or if you are being upsold on equipment that is still perfectly functional.
Common Gate Issues We Fix
I have seen just about every kind of gate failure imaginable. People often call me thinking they need a new motor, but a quick inspection usually reveals a much simpler, cheaper fix. If you are experiencing any of the following, call me before you spend money on a replacement:
- Gate Sagging or Dragging: This is the number one issue in our area. It happens when the hinge post moves due to the clay soil shifting or the weight of the gate over time. I do not just shim the gate; I address the post and the frame.
- Opener Won’t Engage: If your motor is humming but the gate isn’t moving, it is often a stripped gear or a chain tension issue. We service all major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
- Safety Sensor Malfunctions: If your gate reverses for no reason, your photo eyes are likely misaligned or blocked by debris. This is a common issue after a heavy rain or windstorm.
- Welding and Structural Repair: If your gate frame has cracked or the brackets have pulled away from the post, I can weld them back on-site. This is almost always cheaper and stronger than bolting on replacement parts.
Every job is backed by my 90-Day Done Right Promise. If the gate acts up again within 90 days, you call me, and I come back to make it right. No runaround, no excuses. I want you to be able to home with the peace of mind that your gate will open when you press the button.
Pricing and Value
I believe in upfront pricing. You will never see me pull a number out of thin air once I am standing in your driveway. I offer clear, honest pricing for all my work. Because I am locally owned and owner-operated, I do not have the overhead of a national company, and I pass those savings on to you. We also have standing offers that make it easier to get the work done right the first time:
- $40 off: Any repair job over $200.
- Free Second Opinion: Bring me any written estimate from a competitor.
- No Trip Charge: We do not charge a trip fee for any service call inside the county.
- Senior & Veteran Discount: A permanent 10% discount for all seniors and veterans.
If you are trying to decide between a repair and a replacement, consider this: a well-maintained gate should last for many years. If your gate is structurally sound, replacing the motor is usually all it takes to get another decade of service. I will tell you honestly if your gate is beyond repair, but I will never suggest a replacement if a Weld & Rust Repair or a new gear will get the job done.
Safety Warning: High-Tension Equipment
I need to be clear about this: some parts of your gate system are dangerous. If your gate uses high-tension springs or heavy-duty cables, please do not attempt to adjust or release them yourself. These components are under enough pressure to cause severe injury if they snap or slip. If you notice a spring that has come loose or a cable that is frayed, please stay back and call a trained professional. I have the proper tools and the experience to handle these high-tension components safely. Your safety is more important than saving a few dollars on a service call.
Areas We Cover
I have been serving this community since 2001, and my reputation is built on showing up. Whether you are living on a ranch in the rural outskirts or a residential lot in the city, I provide the same level of service. We regularly travel throughout the region to assist homeowners with their gate and access control needs. We are the local choice for gate repair in:
- Denton: The heart of our service area.
- Argyle: We handle everything from standard residential gates to custom estate systems.
- Flower Mound: Fast response for gate motor and sensor repairs.
- Little Elm: Expert welding and mechanical repair for waterfront and residential properties.
- Krum: Reliable service for rural and residential gates alike.
- Corinth: We keep your gate moving and your property secure.
- Shady Shores: Professional service for all major gate brands.
- Cross Roads: On-site welding and troubleshooting for local homeowners.
Frequently Asked Questions
How fast can you get to my property for a repair?
I answer the phone 24 hours a day, 7 days a week, and I prioritize urgent repairs because I know a stuck gate is a security issue. Call me at (940) 394-8744, and I can usually give you a specific time window for when I can be there to help.
Do you work on my brand of gate?
I am certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you have a different brand, give me a call-I have likely worked on it before and have the parts or the know-how to get it running.
Is it cheaper to repair or replace my gate motor?
It is almost always cheaper to repair your motor if the issue is a worn gear, a faulty sensor, or a loose connection. I will never try to sell you a new motor if yours can be fixed, and I offer a free second opinion on any written estimate you have received from another company.
What happens if the repair doesn’t hold?
I stand behind every job with my 90-Day Done Right Promise. If the gate is not working properly within 90 days of my repair, I will come back to make it right, free of charge. My name is on the shop, and I intend to keep it there.
If you are ready to get your gate working again, give me a call at (940) 394-8744. I am happy to answer your questions, provide a free estimate, and get your gate moving again.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Denton and nearby areas.
What Our Customers Say
"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth