Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Oak Point
Gate parts and welding in Oak Point usually means one of three things: a hinge post that the clay has pushed out of plumb, a bottom rail rusted through by lakeside humidity, or a motor that burned out fighting a gate that no longer swings true. We fix all three, and we do it in your driveway. Gatewood Fence & Gate has been owner-operated since 2001, and Hal Gatewood still shows up on the job himself more often than not. If your gate is dragging, sagging, or dead in Oak Point, call (940) 394-8744 and a live person answers. Not a voicemail, not a queue. A person who knows gates.
Oak Point sits right on Lake Lewisville, and that changes everything about how iron and steel behave out here. The moisture works on hinges and control boards year-round. The black clay under your posts swells in spring and cracks in August. Most “motor failure” calls we get from Oak Point are actually post-heave calls, which is something you learn fast when you work this side of Denton County. Our Oak Point customers don’t need a parts swapper. They need someone who can weld, re-set a post, and make the gate run right for another fifteen years.
Why Gatewood Fence & Gate Is Oak Point’s Preferred Gate Parts & Welding Company
We’re not a franchise and we don’t run a national call center. The name on the shop is Hal Gatewood, and the shop has a published address and license number anyone can look up. That matters in Oak Point, where HOA-governed communities like Oak Point Estates and the custom homes along Lakeshore and Shahan Prairie have gates that were installed in the 2000s and are now hitting their first full replacement cycle together. We’ve been welding and repairing gates since 2001, and we’ve seen every failure mode this lake can throw at a post or a panel.
When you call for gate parts or welding in Oak Point, you get a straight answer on the phone: what we think is wrong, what it costs, and when we can be there. No trip charge inside the county. A free second opinion on any written estimate. And every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround, no fine print. That’s how we’ve kept Oak Point customers calling us since before half these subdivisions had streetlights.
Hal’s crew arrives in uniform, background-checked, and with the truck stocked for the job you described. We don’t haul your gate off to some shop across the metroplex. We weld on site in your driveway, which means you watch the work happen and you know exactly what got fixed. That’s the oldest accountability there is: the name is on the shop, and the shop is down the road.
Our Gate Parts & Welding Services in Oak Point
Hinge Replacement
Lakeside humidity eats hinge barrels faster than anything else on a wrought iron gate. We see it weekly in Oak Point: a gate that looked fine in the spring is dragging by September because the hinge pin has corroded and the barrel is ovaled out. We cut off the old hinge, weld in a new barrel and pin rated for the gate’s weight, and re-hang the panel so it swings without binding. For heavier custom gates, we’ll often upgrade to greaseable ball-bearing hinges that hold up better near the water.
Post Replacement
This is the big one in Oak Point. The expansive black clay under this part of Denton County swells dramatically in wet seasons and shrinks in summer drought, which rocks concrete gate posts out of plumb season after season. A post that’s tilted even an inch can bind a swing gate, drag a slide gate off its track, and burn out a motor in a single season. We excavate the footing, re-set the post in concrete with proper drainage, weld in lateral bracing where the gate design allows, and re-align the operator. A post that’s not plumb will kill whatever gate hangs on it. We fix the post first, not the symptom.
Rail Repair
Bottom rails on Oak Point’s wrought iron gates take the worst of the lakeside moisture. Condensation runs down the pickets, pools at the rail, and rusts through from the inside where you can’t see it until the whole panel starts to sag. We cut out the rotted section, weld in new steel matched to the profile and spacing of your existing pickets, grind the joint smooth, and prime and paint to match. Unless you know where to look, you won’t find the repair. Fix the panel without addressing the post and you’ll fix it twice, so we check both before we weld anything.
Custom Welding
Oak Point’s larger lots and master-planned aesthetic mean a lot of custom ornamental work: scrollwork, arched tops, matched pedestrian gates, inlaid house numbers. When a 2000s-era gate sustains damage, the last thing you want is a generic replacement panel that looks wrong next to the neighbor’s. We fabricate and weld replacement sections on site, matching the original profile, spacing, and finish. If the original fabricator is gone, we reverse-engineer the pattern from the surviving pieces. It takes a certain kind of stubborn to do that work right, and Hal has been that kind of stubborn since 2001.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Oak Point
We’re certified to service nine major gate brands, and the three we see most often in Oak Point are Ghost Controls, DoorKing, and Elite. Lakeshore properties with long driveways tend to run Ghost Controls slide operators, while the HOA community entry systems in Oak Point’s newer subdivisions lean on DoorKing and Elite hardware. We keep common boards, loops, and limit switches stocked for these brands, which means a same-day repair in Oak Point is usually possible when the part is something we can carry. If it’s an oddball part we don’t have on the truck, we tell you that on the phone before you spend a dime, and we get it ordered the same day.
Common Gate Parts & Welding Problems We See in Oak Point Homes
- Clay heave tilting hinge posts. Oak Point’s expansive black clay swells and shrinks more violently than the sandy soils in neighboring Denton County towns. A post that was plumb in April can be out by an inch in July, which binds the gate and burns out the operator. Swapping the motor without re-setting the post just destroys the new unit within a season.
- Lakeside humidity corroding iron and steel. The constant moisture off Lake Lewisville works on hinges, bottom rails, and motor housings faster than in landlocked DFW suburbs. We regularly see decorative wrought iron gates in Oak Point with bottom rails rotted from the inside while the visible surface still looks fine.
- 2000s-era HOA entry systems hitting end-of-life together. Oak Point’s community gates were installed during the 2000s-2010s growth surge, and those loop detectors and keypad entry boards are now reaching 15-20 years old. When three different neighborhoods need board replacements in the same month, that’s not a coincidence. That’s a cycle.
- Rack and pinion binding on slide gates. A slide gate that’s dragging, groaning, or tripping its safety photocell in Oak Point is usually fighting a post or track issue, not an operator issue. We diagnosed one on a Viking slide gate in Oak Point Estates recently: the hinge post had heaved 1.5 inches out of plumb, binding the rack and pinion. We excavated the footing, re-set the post in concrete with proper drainage, welded in a lateral brace, re-aligned the rack, and installed a new BFT operator with a fresh loop detector. The gate cycles quietly now and passes UL 325 entrapment tests.
Pricing for Gate Parts & Welding in Oak Point, TX
Here are real numbers for the Oak Point market, so you know what to expect before anyone touches your gate. A hinge replacement on a typical single swing gate runs $180-$420 depending on weight and whether we’re doing one hinge or all three. Post replacement with excavation, concrete re-set, and operator re-alignment typically runs $650-$1,400, and that’s the job that saves you a new motor. Bottom rail repair and custom welding on wrought iron averages $250-$700 per section, depending on how much steel we’re cutting out and whether the pattern is custom. A full custom fabrication or major rebuild can run $1,200-$4,500 on Oak Point’s larger estate gates. Every price is quoted and agreed before any work starts. We don’t show up and change the number at the door. And our Gate Parts & Welding work carries the 90-Day Done Right Promise in writing, on every single job.
You also get $40 off any repair over $200, free second opinions on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (940) 394-8744 for an exact quote. Estimates are free, and someone who knows gates answers the phone.
We Also Serve Cities Near Oak Point
If you’re just outside Oak Point, we’re still close. We work regularly in Denton, Argyle, Flower Mound, and Little Elm, and the same live-person phone line covers all of them. Same 90-Day Done Right Promise, same no-trip-charge policy inside the county. If you’re on the edge of Oak Point and not sure whether we cover you, call and ask. The person who answers will know.
Serving Oak Point, TX - Our Local Coverage Area
We’re based in the Oak Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Oak Point
The most common cause is a hinge post that the black clay under Oak Point has tilted out of plumb. Straightening the panel without re-setting the post is a temporary fix, because the misaligned post will bind the gate again within weeks. We excavate the footing, re-set the post in concrete with proper drainage, and only then re-hang and align the panel. Fix the post and the panel holds. Skip the post and you’ll be calling us again by next season. Call (940) 394-8744 and we’ll come look at your post, not just your gate.
Yes. We fabricate and weld replacement sections on site, matching the original profile, scrollwork, spacing, and finish. If the original fabricator is out of business, we reverse-engineer the pattern from the surviving sections. The repair goes in steel matched to your existing gate, welded, ground smooth, and painted to blend. Most Oak Point customers can’t find the repair after we’re done. Estimates are free, so call (940) 394-8744 and we’ll tell you exactly what it will take to match your gate.
No, and it’s almost never the motor’s fault. Near Lake Lewisville, the usual culprit is a post or track that clay heave has shifted, which forces the motor to work against a binding gate until it burns out. Replacing the operator without fixing the alignment just kills the new unit too. We fix the post and track first, then install a fresh operator, and we warranty the whole repair with our 90-Day Done Right Promise. Call (940) 394-8744 before you buy another motor.
We do. Underground operators on Oak Point’s higher-end driveway gates fail for the same reasons as the post-mounted ones: water intrusion from lakeside moisture and misalignment from clay movement. We diagnose on site, weld and re-align what needs it, and replace the operator when it’s genuinely done. We service Ghost Controls, DoorKing, Elite, Mighty Mule, and six other major brands. Call (940) 394-8744 and we’ll tell you what’s actually wrong before we quote you anything.
Most 2000s-era HOA entry systems in Oak Point were not built for this much ambient moisture, and we’re now seeing loop detectors, keypad entry boards, and control boards failing as a group. Humidity corrodes board connections and causes phantom faults that are easy to misdiagnose. We test the whole system, not just the gate, and we replace only what’s actually dead. If your HOA entry gate is acting up in Oak Point, call (940) 394-8744 and we’ll come diagnose it on site.
Call Gatewood Fence & Gate for Gate Parts & Welding in Oak Point
If your Oak Point gate is sagging, dragging, rusted through, or dead, call (940) 394-8744. A live person answers, day or night. We’ll talk through what’s happening, tell you what it’s likely to cost, and set a time to come look. Free estimates, no trip charge inside the county, and every job carries the 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the shop and on every invoice, and he’s been at it since 2001. You won’t get a call center. You’ll get the person who’s going to do the work.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Oak Point and the surrounding Denton County communities since 2001.