Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Krum
Gate parts and on-site welding in Krum usually falls into two buckets: a post that’s shifted out of plumb, or a hinge that’s finally torn loose from years of clay-soil movement. Gatewood Fence & Gate handles both without hauling your gate off to some shop. We weld in your driveway, off your own power where we can, and the price is agreed before we strike an arc. Hal Gatewood has been running this outfit since 2001, and the phone rings to a live person, any hour. Call (940) 394-8744 and you’ll get one.
Why Gatewood Fence & Gate Is Krum’s Preferred Gate Parts & Welding Company
We work Krum regularly enough to know its roads by name. Plainview Road, Jackson Road, Crawford Road, the acreage off FM 1173. Most of what we see out here is a direct result of the soil. Krum sits on Denton County shrink-swell clay, the kind that opens cracks in August and swells shut after a hard rain. A gate post set in that soil without proper stabilization will move. Not might move. Will move. Homeowners around Krum who’ve had a national outfit swap a hinge bracket and call it fixed usually call us within a year because the gate’s sagging again. We start at the post.
Our reputation in Krum is built on repair-first work. If a hinge post can be straightened and sleeved, we do that before we talk replacement. If a welded joint cracked, we grind it back and weld it properly rather than bolting a patch plate over the failure and leaving. Every job, parts or welding, carries our 90-Day Done Right Promise in writing. If it’s not right, Hal comes back. No runaround. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Our Gate Parts & Welding Services in Krum
Hinge Replacement
Hinges on Krum gates take abuse from two directions: wind load off the open prairie and the slow twisting of posts in shrink-swell clay. We replace barrel hinges, strap hinges, and heavy weld-on farm hinges with hardware sized to the gate’s actual weight and width. A hinge that’s undersized by even one bracket size will wallow out in a season. We’ve pulled too many undersized hinges off Krum gates to count, and Hal gets annoyed every time he sees one somebody sold as “good enough.”
Post Replacement
This is the fix Krum needs more than any other. A gate sags in the hinge post, not in the middle, and that’s where we start. We pull the old post, dig the hole deeper than the original, and set the new one in concrete with a full-depth collar so the clay doesn’t grab it and twist it out of square. For automated gates, we re-pour the footing to carry the operator’s torque without cracking. Fix the panel without the post and you’ll fix it twice. We’d rather do it once.
Rail Repair
Top and bottom rails on tubular steel gates crack at the weld points after enough freeze-thaw cycles and wind loading. We cut out the failed section, weld in fresh steel, and brace the rail where it needs bracing. On ranch gates out east of I-35 toward the older agricultural properties, we see a lot of fatigue cracking where the diagonal brace meets the bottom rail. That’s a straightforward weld repair if you catch it before the rail lets go entirely.
Custom Welding
Sometimes the gate that’s there can’t be made right with parts alone. We do on-site stick and MIG welding for gate frames, hinge plate reinforcement, operator mounting brackets, livestock panel inserts, latch strike relocation, and custom gate extensions for wider openings. If we’re welding at your place in Krum, we run it off our own equipment and we clean up when we’re done. You get a price before we start, and it doesn’t change at the door.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Krum
We’re certified to work on nine major gate brands, and we see plenty of BFT, Viking, and Ghost Controls out on Krum acreage. The Viking swing and slide operators are common on farm gates where a heavy gate needs real torque. BFT shows up more on newer automated driveway gates in the rural-residential subdivisions. If you’ve got a brand we service and a part that’s failed, we’ll tell you straight whether it’s worth repairing or replacing, and we stock the common parts so you’re not waiting on a freight truck.
Common Gate Parts & Welding Problems We See in Krum Homes
- Posts heaving from clay soil. Dry summers shrink the ground away from the post, then fall rains swell it back, and the post ends up tilted or shifted. Hinges bind, latch strikes miss by an inch, and operators start faulting for no obvious reason.
- Ice-storm hinge seizure. North Texas ice storms get into hinge pins, freeze them solid, and when someone forces the gate, the weld at the hinge plate cracks. We see this every winter on older steel ranch gates around Krum.
- Wind-bent operator arms and slide racks. Spring severe weather pushes hard on wide gates, bending the arms on automatic operators and the rack and pinion on slide gates. The gate then binds mid-travel and the motor burns out trying to push through it.
- Latch strikes that won’t hold. When a post moves even half an inch, the latch bolt misses the strike plate. The gate won’t latch, or the opener’s lock function cycles constantly because it can’t confirm closure. We mill and relocate the strike rather than shimming it and hoping.
Pricing for Gate Parts & Welding in Krum, TX
Here’s what Krum homeowners can expect, quoted honestly before we touch anything. Hinge replacement on a standard residential steel gate runs $160 to $380 depending on gate weight and how many hinges we’re cutting off and welding back. Post replacement with a properly poured concrete collar runs $280 to $650 per post. Rail repair and welding work runs $90 to $240 per joint, and custom on-site welding is $85 to $150 per hour plus materials. Operator realignment or bracket re-welding after soil movement sits between $140 and $320. Every job carries the 90-Day Done Right Promise, and the price we quote is the price you pay. No trip charge inside the county. Seniors and veterans get 10% off, permanently. Call (940) 394-8744 for a free estimate.
We Also Serve Cities Near Krum
If you’re just outside Krum, we work Ponder, Denton, Argyle, and Lake Dallas too. Same live person on the phone, same on-site welding, same 90-Day Done Right Promise. Whether you’re off a county road in Krum or a subdivision a few miles out, our Gate Parts & Welding team covers the whole area.
The Soil Under Your Gate
Here’s something a generic gate parts page won’t tell you. Krum sits squarely on Denton County’s shrink-swell clay, and that soil heaves and cracks with wet-dry cycles so dramatically that gate posts shift inches out of plumb between seasons. For the wave of acreage homeowners who’ve installed automated driveway gates as Krum’s rural lots suburbanize, post-realigment and operator recalibration become a near-annual service call. This is far more severe than what technicians face in the sandier soils west toward Archer County. The practical takeaway: any repair on an automated gate in Krum should start with the post base. If the footing isn’t stabilized, you’ll be calling somebody back in two seasons. We quote a concrete collar sleeve or post-stabilization fix alongside operator repairs because we know the clay will undo anything set on top of it. Contractors moving up from DFW’s more stable soils get caught by this constantly. We’ve been doing Gate Parts & Welding in Krum long enough that it’s the first thing we check.
What We Found off Plainview Road
One job sticks with us. A ranch off Plainview Road had a heavy-duty Viking swing gate sagging hard enough to drag the ground. The hinge post had tilted a full six degrees in the black clay after spring rains. We didn’t patch it. We dug out the old footing, poured a 4-foot concrete collar with rebar, set a new 6×6 steel hinge post, welded reinforced hinge plates, and realigned the operator and safety photocells. The gate swings square now, and it’ll stay that way through the freeze-thaw cycles. That’s the difference between replacing a part and fixing the thing that fails.
Serving Krum, TX - Our Local Coverage Area
We’re based in the Krum area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Krum
Because the repair wasn’t done at the post. Krum’s shrink-swell clay moves anything set in it, and if the footing under your hinge post wasn’t stabilized with a proper concrete collar, the post shifts and the gate follows. We stabilize the post base first, then align the gate and operator. Call (940) 394-8744 and we’ll look at the footing before we quote anything.
Yes, in most cases. We weld an operator mounting bracket and rack directly onto the existing gate frame, provided the frame is structurally sound. If the gate’s rails are too far gone or the frame is twisted from repeated soil movement, we’ll tell you straight whether repair or replacement is the better dollar. The quote comes before any work starts.
That crack is almost always a combination of a moving post and a hinge plate that was welded with too little penetration. We grind the old weld out fully, bevel the joint, and lay a heavier weld with proper heat. We also reinforce the hinge plate and stabilize the post so the cycle doesn’t repeat. Give us a call at (940) 394-8744 and we’ll set a time to look at it.
It’s the most common choice for long driveway runs in Krum, and it works well with the brands we service like Ghost Controls and BFT. Solar means no trenching a power line, which on some acreage lots is thousands of dollars saved. We’ll size the panel and battery to your gate’s weight and daily cycles so it doesn’t die in a run of cloudy winter days. Free estimate, no obligation.
The short answer is a properly adjusted operator with a working clutch or torque limit, plus wind-rated hinges and a closing speed that’s matched to the gate’s size. On manual gates, a heavy-duty holdback or latch on both open and closed positions is the fix. We set these up on Krum ranch gates regularly. Call (940) 394-8744 and we’ll come out and look at your specific opening.
Call Hal for Gate Parts & Welding in Krum
If your gate’s sagging, dragging, or not closing square, don’t throw parts at it. Call (940) 394-8744 and talk to a live person. We’ll give you a straight answer, a free estimate, and a written price before any work starts. The 90-Day Done Right Promise stands behind every job we do in Krum. Hal Gatewood’s name is on the shop.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Krum and the surrounding area since 2001.