Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Ponder
Gate Installation - Ponder and repair work usually means one of two calls: a ranch gate that’s dragging or a hinge post that’s leaning, and both trace back to the clay under your property. A typical hinge replacement on a pipe gate here runs $180-$320, and a full post reset with new concrete footings runs $450-$900 depending on post size and how deep we have to dig. Hal Gatewood has been fixing gates since 2001, and we carry the parts, the welder, and the digging equipment on the truck so we don’t have to make two trips. Call (940) 394-8744 and a live person answers, day or night.
Ponder isn’t a subdivision town where every gate matches the neighbor’s. It’s ranchettes off W. Bailey, horse properties down Old Stoney, and barndominiums on 10-acre parcels with driveways that fit a gooseneck trailer. That changes what kind of gate parts fail and how you fix them. Our Gate Parts & Welding work starts with the post in the ground, not the panel swinging from it.
Why Gatewood Fence & Gate Is Ponder’s Preferred Gate Parts & Welding Company
We’re the company people in Ponder call after the other outfit quoted a full replacement and never mentioned the footing. Hal Gatewood’s name is on the shop and on every invoice, and his published address and license number mean you can find him if something goes sideways. That’s not marketing. That’s the oldest accountability there is.
Our crew has reset leaning hinge posts on W. Bailey Street, welded opener brackets onto pipe cattle gates off Old Stoney Road, and squared up slide gates on ranchettes near Ponder High School. We know the drives, the soil, and the gate stock out here because we’ve worked on it. Response time to Ponder is usually same-day for repairs, and the truck rolls stocked with hinge pins, roller bearings, latch hardware, welding rod, and 2-3/8″ and 2-7/8″ schedule 40 pipe so we can do the work in one visit.
Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround.
Our Gate Parts & Welding Services in Ponder
Before we touch a gate in Ponder, we check the post. A gate sags in the hinge post, not in the middle, and Blackland Prairie clay moves posts more than any panel could. That’s the starting point, and it’s why four services make up most of what we do here.
Hinge Replacement
Ponder’s heavy pipe cattle gates put constant torque on hinge welds, and the February ice event showed exactly where the weak points are. A snapped lower hinge weld means the panel drops and drags, and trying to shim it back is a band-aid. We cut the old hinge off, grind the post clean, and weld a new barrel or strap hinge in place with the gate squared and level. If the post is heaving, we deal with that first.
Post Replacement
This is the defining repair in Ponder. The clay shrinks during drought and swells after spring rain, heaving posts two to three inches out of plumb. A post that was square in April can throw the latch out of alignment by August. We dig down past the disturbed zone, set a new schedule 40 post in a concrete collar with proper drainage, and re-hang the gate so it actually latches. Typical cost in Ponder runs $450-$900 for a single post replacement, depending on depth and how much caliche we’re digging through.
Rail Repair
Ranch gates take hits from tractors, trailers, and the occasional bull. A bent top rail or a cracked weld at the cross-member will eventually fail completely. We straighten what’s straightenable and cut out and re-weld what isn’t. On older pipe gates with rust at the rail connections, we plate the joint and weld it so the repair outlasts the rest of the gate.
Custom Welding
Barndominium gates sized for trucks and farm equipment don’t come off a shelf. We weld opener brackets onto existing pipe cattle gates, build custom receiver mounts for Ponder Gate Motor & Opener systems like Mighty Mule and LiftMaster, and fabricate latch extensions so the lock actually catches on a gate that’s been re-hung after a post reset. If we’re building a new panel, we match the pipe size and spacing to the rest of the fence line so it doesn’t look like an afterthought.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Ponder
We’re certified to service LiftMaster, Mighty Mule, and DoorKing operators for Gate Access Control in Ponder, which covers the majority of what’s hanging on gates across Ponder’s ranchettes. We stock common parts for those brands on the truck: control boards, limit switches, remote receivers, and capacitor kits. For less common failures, we can have parts in from our supplier within a day or two, then get back out to finish the job. You’re not waiting on a part that’s already in your driveway when we get there.
Common Gate Parts & Welding Problems We See in Ponder Homes
- Gate drags in August that latched in April. The panel didn’t change; the post did. Blackland clay heaves hinge posts two to three inches between wet spring and drought summer, and the fix is a post reset, not a panel adjustment.
- Broken weld at the hinge after a freeze. Ice storms like February 2021 put hundreds of pounds of extra load on frozen hinges and operator arms. The lower hinge weld is usually the first casualty. Grinding and re-welding beats patching it.
- Automatic gate stops halfway and reverses. On Ponder’s long gravel and caliche drives, a stop-and-reverse is usually the photo-eye out of alignment or a failing rack gear on a slide gate, not the control board. We check the cheap stuff first, because that’s what it usually is.
- Latch won’t catch after heavy rain. Post movement plus a sagging panel equals a latch bolt that sits a half-inch too high. If the post is sound, we adjust the latch position. If the post heaves again, the latch will miss again, which is why we verify the footing before we leave.
Pricing for Gate Parts & Welding in Ponder, TX
Here’s what gate parts and welding work typically costs in Ponder:
- Hinge replacement: $180-$320 per hinge, including welding and alignment. Most ranch gates have two or three hinges.
- Post replacement: $450-$900 per post, including digging, concrete, and re-hanging the gate. Price swings on how deep the old footing goes and whether we’re fighting caliche.
- Rail repair or weld patch: $150-$400, depending on how much of the rail we’re cutting out and replacing.
- Custom welding (brackets, latch extensions, receiver mounts): $120-$350, quoted before we start.
- Opener bracket welded to existing gate: $220-$400 including the bracket and welding, not including the operator itself.
The price is quoted and agreed before any work starts. Not after. If we find something unexpected while we’re digging, we stop and show you what’s there before you approve a dollar more. We never hand you an invoice that doesn’t match the handshake. And remember: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Ponder
If you’re just outside Ponder, we’re already in the area. The same truck and crew that handles Gate Parts & Welding in Ponder covers Krum, Argyle, Denton, and Flower Mound, and the same 90-Day Done Right Promise applies on every job.
Serving Ponder, TX - Our Local Coverage Area
We’re based in the Ponder area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Ponder
No. In almost every case we see on Ponder’s clay, the panel is straight and the post has heaved. The gate that latched in April is the same gate that drags in August; the ground under the post changed. We reset the post with a properly sized concrete footing, re-hang the existing gate, and you save the cost of a new panel. Call (940) 394-8744 and we’ll come look before you write a check for a replacement.
First, pull your HOA’s design guidelines and note the sections on gate height, finish, and set-back from the property line or roadway easement. Most Ponder ranchette HOAs want a natural or dark metal finish, sloped or rounded corners, and an operator that won’t conflict with the neighbor’s remotes. We can generate a simple plan drawing with dimensions and pipe sizes for your submission, and we’ll build to whatever the approval letter says. If the HOA asks for revisions, we adjust the drawing before we cut any steel. Call (940) 394-8744 and bring us the guidelines.
Yes. If the panel is straight and the hinge post is sound, we weld a receiver or post-mount bracket directly onto the existing pipe, then mount the operator. This is standard work for us, especially on older pipe gates where the panel has decades of life left and replacing it would mean two days of fence work instead of an afternoon of welding. The bracket weld is part of the job quote and covered by our 90-Day Done Right Promise.
On Ponder’s long, dusty drives, it’s usually the photo-eye. Caliche dust and pollen collect on the lenses, and the beam reads a false obstruction. Clean the lenses first. If it still stops halfway, check whether the rack gear is missing teeth or loose along the track. If the rack is intact and the photo-eyes are clean, the issue is likely the limit setting or the control board, which we can test and replace. Call (940) 394-8744 and describe the exact stopping point; that often tells us which part to expect.
For a wide gate on a barndominium driveway, we set either 4″ schedule 40 or 6″ schedule 40 pipe, depending on gate weight and opening width. On Ponder’s expansive clay, the footing matters more than the post gauge. We pour a continuous concrete collar with drainage below the frost line, which gives the post a stable base even when the surrounding clay swells and shrinks. If we’re replacing a post that heaved, the new one goes deeper and wider than what failed. Call (940) 394-8744 for an exact quote; estimates are free.
Get Your Ponder Gate Fixed the First Time
If your gate is dragging, sagging, or sitting crooked, start with a phone call. Hal will pick up, ask where you are in Ponder, and tell you straight what he thinks it is before anyone drives out. No pressure. No sale pitch. Just a guy who’s been welding and fixing gates since 2001, with a truck full of parts and a post-hole digger that’s seen plenty of Blackland clay.
Call (940) 394-8744 for a free estimate. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Ponder and surrounding Denton County since 2001.