Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Bartonville
Gate parts and welding in Bartonville usually runs $180 to $1,400 depending on whether we’re replacing a hinge, resetting a clay-heaved post, or fabricating a custom bracket to match your ornamental iron. Most hinge and roller repairs we finish the same day we show up, and every job carries our 90-Day Done Right Promise in writing. Hal Gatewood has been fixing gates since 2001, and the person who answers the phone at (940) 394-8744 is the person who stands behind the work. If you live off McMakin Road, Jeter Road, or anywhere in the 76226 zip code, we know your gate is probably heavy, custom, and working harder than any gate in a track-home subdivision.
Why Gatewood Fence & Gate Is Bartonville’s Preferred Gate Parts & Welding Company
Bartonville is different from Flower Mound or Argyle in one way that matters a lot for gate work: your properties are big, your gates are heavy, and a lot of you have two of them on the same driveway loop. We show up to a lot of calls where a decorative ornamental iron entry gate and a ranch slide gate for the horse paddock both went out of alignment after the same rain. That’s not a coincidence. Denton County’s Blackland Prairie clay swells in the spring and shrinks in the summer, and a post that moves half an inch at the footing can throw a 600-pound gate out of plumb by several inches at the latch.
We’re not a franchise van passing through. Gatewood Fence & Gate is locally owned and owner-operated, with a published address and license number anyone can look up. Calls are answered by a live person around the clock, not a voicemail tree. When a Bartonville homeowner calls about a sagging gate or a broken weld, they get Hal’s cell number, and they get a straight answer about whether it’s a same-day fix or a morning’s worth of fabrication. Reviews from Bartonville customers keep pointing to the same things: we show up in the window we promised, we fix what’s broken without inventing extra work, and our Gate Parts & Welding team leaves the driveway cleaner than we found it.
Our Gate Parts & Welding Services in Bartonville
Hinge Replacement
Most Bartonville estates have ornamental iron swing gates that weigh three to five times what a standard residential gate weighs. A hinge that’s been on a gate since 1998 doesn’t fail quietly. It starts as a scrape, then a drag, then the gate won’t latch at all. We remove the old hinge, check the post for plumb, and weld on a replacement that matches your gate’s existing ironwork. Off-the-shelf hinges from a big-box store aren’t built for the weight of a custom Bartonville entry gate, so we fabricate and weld replacements in the driveway whenever the original hardware is non-standard. If you hear metal grinding when the gate swings, call us before the hinge seizes and bends the gate frame (940) 394-8744.
Post Replacement
This is the one we see most often after a wet Bartonville spring. The clay soil under a gate post expands with moisture and shrinks during the summer dry spell, and over ten or twenty seasons, that slow cycle walks the post out of plumb. A gate sags in the hinge post, not in the middle, and that is where we start. We dig out the old footing, set a deeper concrete base, and reset the post with an eye toward drainage so it doesn’t heave again next season. On properties along McMakin Road and the east side of town, we routinely pour footings down three feet or more to get below the worst of the clay movement. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Rails on Bartonville gates take abuse from weight, wind, and occasional contact with a trailer or a horse. A bent or cracked rail throws the whole gate out of square, which makes the operator work harder and the hinges wear faster. We straighten rails when it’s practical and weld in reinforcing when it’s not; a repaired rail should be as strong as the original, not just “good enough.” We’ve fabricated replacement rail sections for ornamental iron gates that were built by local welders twenty years ago and aren’t in any catalog. If your gate is racking when it moves, the rail is usually the first place to look.
Custom Welding
Bartonville has more custom gates per mile than almost anywhere in Denton County, and custom gates mean custom parts. When a hinge, bracket, or latch wears out on a gate that was built to order, you can’t always order a replacement. We weld on site, which means your gate stays in your driveway, and we match the metal thickness, the finish, and the design language of the existing ironwork. Hal welds ornamental repairs the same way he welded them in 2001: clean fit, solid penetration, no shortcut. We’ve fabricated matching hinges for scrollwork gates, rebuilt latch housings, and reinforced gate frames that were never built heavy enough for the operators someone hung on them later.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bartonville
We service and stock parts for the operators most common on Bartonville estates: LiftMaster, Elite, DoorKing, and Mighty Mule. Many of the automated systems around Bartonville were installed with the home or the gate build, and the openers from ten or fifteen years ago have known failure points we see before the customer does. We keep common boards, remotes, and safety parts on the truck for liftmaster and Elite units, so a Bartonville customer isn’t waiting three days for a part to ship from a distributor in another state. If the operator is beyond a reasonable repair, we’ll tell you that plainly and give you an honest replacement price, not a sales pitch.
Common Gate Parts & Welding Problems We See in Bartonville Homes
- Clay-heaved hinge posts: Bartonville sits on expansive Blackland Prairie clay that swells in wet months and shrinks in dry ones. A post that was dead plumb in January can be an inch out by Mother’s Day, and a heavy ornamental gate follows the post. We reset posts deeper than the original install, use compacted gravel and larger footings, and set drainage so the post isn’t sitting in a wet pocket.
- Non-standard hinges on bespoke gates: Your gate may have been designed and fabricated by a local welder who is now retired, moved, or out of business. That hinge is not in a catalog. We weld a replacement to match the existing ironwork, in your driveway, instead of convincing you to replace a $10,000 gate because a $40 hinge wore out.
- Both gates failing after one rain: On Bartonville properties where the decorative front entry and the horse pasture gate share a long driveway loop, a single heaving post can pull both gates out of alignment in different ways. The swing gate drags at the latch and the slide gate binds on the rail. One service call: we reset the post, fix both gates, and recalibrate both operators. No need for two separate visits or two invoices.
- Roller and wheel wear on ranch slide gates: Pasture gates in Bartonville see more cycles than most residential gates ever will: every feed run, every trailer, every farrier visit. Worn gate rollers make the gate grind, jump the rail, or stall the operator mid-travel. We replace the rollers, inspect the rail for wear, and check the chain or belt drive while we’re under the gate.
Pricing for Gate Parts & Welding in Bartonville, TX
Here are honest ranges for the work we do in Bartonville. Hinge replacement typically runs $180 to $420 depending on the hinge type, the gate weight, and how much cleanup the old weld needs. Post replacement in Bartonville clay runs $450 to $1,100 because we’re typically digging deeper footings than the original install. Rail repair is usually $220 to $600 depending on the length of the repair and the thickness of the steel. Custom welding for a fabricated hinge or bracket runs $150 to $480 per piece, and we’ll quote the whole job before any work starts, not by the hour with a shrug at the end. You’ll get the price in writing, and that’s the price. Call (940) 394-8744 for an exact quote, and remember we offer $40 off any repair over $200 and a 10% discount for seniors and veterans, every day, no haggling required.
We Also Serve Cities Near Bartonville
Our shop coordinates work from the Dallas-Fort Worth metro office, and crews serve Bartonville along with the surrounding towns. If you’re in Denton, Argyle, Flower Mound, or Little Elm, you get the same live-answer phone, the same written pricing, and the same 90-Day Done Right Promise. For a full look at what our Gate Parts & Welding service covers, see the main service page.
Serving Bartonville, TX - Our Local Coverage Area
We’re based in the Bartonville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Bartonville
In Bartonville, hinge failures on newer gates are almost always a post problem, not a hinge problem. The clay soil pushes the post out of plumb, and the hinge is now carrying the gate’s weight at an angle it was never built for. You can replace the hinge, but if the post is a half-inch out, the new hinge fails the same way. We fix the post first, then the hinge, and you’ll stop replacing the same part every other year. Call (940) 394-8744 and we’ll check the post before we sell you a hinge.
No, you need one visit, and we plan for that when we schedule Bartonville calls. On a shared driveway loop, a single heaving post can misalign the ornamental entry gate and the ranch slide gate at the same time. We bring parts and equipment for both gate types on the truck, reset the problem post once, and fix both gates before we leave. One visit, one written price, two gates working again.
Yes, and for Bartonville gates this is usually the right call. A mass-produced hinge won’t match bespoke scrollwork or period iron detailing, and it usually won’t carry the gate’s weight either. We weld replacement hinges on site, matching the metal thickness and the visual character of the original hardware. Your gate stays in the driveway and the new hinge looks like it belongs there. Call (940) 394-8744 and describe the hinge; Hal will tell you honestly whether it’s a fabricated match or a standard part that will work just as well.
It’s common, but it’s not something you should live with. Bartonville’s expansive clay moves seasonally, and a cantilever gate that drags in spring is binding because the post or the rail has shifted. The gate doesn’t fix itself in late summer; the clay shrinks back and masks the problem. We can reset the posts on deeper footings and check the rollers so the gate runs true through the wet season. If it drags every spring, call us in the fall before the clay swells again at (940) 394-8744.
If your gate operator has safety photocell capability, then yes, the photocells should be present, aligned, and working after any welding or structural work. Welding repairs can change the gate’s travel path by even a quarter inch, which might be enough for the safety beam to miss its receiver. We check alignment and function as part of the repair and won’t hand you back a gate that closes on a kid or a horse. Safety edges and photocells are part of the job, not an add-on line at the bottom of the invoice.
If your Bartonville gate is dragging, grinding, or hanging crooked, call (940) 394-8744 for a free estimate. We’ll quote the price before any work begins, write the 90-Day Done Right Promise on the invoice, and show up when we said we would.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bartonville with owner-operated gate repair since 2001.