Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Copper Canyon
Gate parts and welding in Copper Canyon usually means one of two calls. Either a front automated gate has stopped opening, or a back pasture gate got hit by a horse and the hinge tore loose. Both are fixable the same day in most cases. Hal Gatewood and his crew weld on site, keep common parts in the truck, and answer the phone around the clock at (940) 394-8744. If you live off Chinn Chapel Road, Copper Canyon Road, or any of the long shared driveways in town, we know the roads, the gates, and the black clay that moves under both.
Why Gatewood Fence & Gate Is Copper Canyon’s Preferred Gate Parts & Welding Company
Hal Gatewood started this company in 2001 and his name is still on the shop, the truck, and every invoice. That matters in a town like Copper Canyon, where the ZIP code 75077 stretches across acreage lots, equestrian easements, and the kind of custom gates you don’t buy off a shelf at a big box store. We’re not a franchise and we don’t route calls through a call center. When you call, a person answers. Often Hal himself.
The work we do here is different from what you’d see in Flower Mound or Highland Village. In Copper Canyon, a single property might have a Viking slide gate at the street and a field-welded steel pipe gate at the horse paddock. Both need to work, but they fail in completely different ways. We carry parts for both on the same truck. That’s not a marketing line. It’s how the truck is stocked, because we’ve been making this drive for years.
Every job, including a simple hinge replacement or a custom weld on a cracked rail, comes with the 90-Day Done Right Promise in writing. If it’s not done right, Hal comes back and makes it right. No argument, no runaround. He’d rather you call him than live with a gate that scrapes, binds, or won’t close when the horses are out.
Our Gate Parts & Welding Services in Copper Canyon
We repair before we replace. That’s the whole shop philosophy. On a lot of Copper Canyon properties, the gate was custom-built when the house went up in the late 1990s or 2000s, and you can’t just order a replacement panel. You weld it, re-hang it, and get another decade out of it. Here’s what we do most often.
Hinge Replacement
Hinges on Copper Canyon gates take more abuse than most people realize. The black clay under this part of Denton County heaves in wet springs and cracks in dry summers, which slowly pulls posts out of plumb. A hinge that was level five years ago is now carrying the gate’s entire weight at an angle, and that’s when the weld tears out. We cut the old hinge off, check the post, and weld a new heavy-duty hinge in place. If the post itself has moved, we reset it before touching the hinge. Welding a new hinge onto a leaning post just means you’ll call us again in a year.
Post Replacement
Copper Canyon has some of the most expansive soil in the county. Gate posts set in that clay don’t just lean; they heave, twist, and sometimes crack the concrete footing entirely. When we replace a post on a shared driveway, we dig carefully around any existing utility lines, set the new post deeper than the original, and brace it so the gate stays functional while the footing cures. We don’t leave your entrance blocked. On a shared driveway, that means coordinating with both neighbors so nobody misses a work truck or a school pickup.
Rail Repair
Long ranch rail gates made from welded steel pipe are everywhere in Copper Canyon, especially on properties with horses. A horse leans on the gate, or tries to reach over, and the top rail bends or the weld cracks at the joint. We weld those rails on site, often while the gate is still hanging. That keeps your pasture secure and your horses where they belong, without hauling the gate to a shop and leaving a gap in the fence line overnight.
Custom Welding
Some Copper Canyon gates were never a standard size. They were built to match a curved driveway, a stone entry column, or a fence line that follows the property’s contour. When a section fails, there’s no catalog part to order. Hal welds a replacement section on site, matching the existing material and pattern as closely as possible. If you need a new gate built to fit an odd opening, or a bracket fabricated for a gate opener that was never designed for your post, we can do that too. The welder rides in the truck, not back at a shop forty minutes away.
Our full Gate Parts & Welding team handles everything from a stripped hinge to a full custom fabrication. If it’s made of steel and it’s supposed to open, close, or stay shut, we work on it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Copper Canyon
Most of the automated gates in Copper Canyon run on one of a handful of operator brands, and we’re certified to service all of the common ones. We work on Viking slide and swing operators daily, and Linear systems show up on a lot of the estates off Copper Canyon Road. BFT hydraulic operators are also in the area, usually on heavier ornamental iron gates. We stock common parts for these brands and can pull from local suppliers when something unusual fails. If your gate was installed when the house was built and nobody has touched it since, there’s a good chance we know the exact unit by sight when we pull up.
Common Gate Parts & Welding Problems We See in Copper Canyon Homes
- Black clay heave throws slide gate tracks out of line. After a wet spring, the ground swells under a long driveway gate track, the rack screws snap, and the operator grinds itself apart trying to push a gate that’s suddenly riding on a warped rail. We see it every year.
- Horse impact bends or cracks pasture gate frames. A steel pipe gate takes a hit from a 1,200-pound animal and the weld at the hinge point is the first thing to fail. We re-weld and re-hang, often the same day.
- Freeze cracks in ornamental iron. When Denton County drops below freezing and ice sits on an east-facing estate gate until noon, the iron contracts and any weak weld becomes a crack. February 2021 kept us busy for months.
- Shared driveway keypad and safety loop conflicts. When two homes share one entrance and each has its own operator, a false signal from one safety loop can confuse the other’s keypad. We sort out which unit is sending the bad signal and fix the wiring or the loop without ripping out both systems.
Pricing for Gate Parts & Welding in Copper Canyon, TX
Here’s what Copper Canyon homeowners can expect, straight numbers. A hinge replacement with on-site welding typically runs $180-$320 per hinge, depending on gate weight and whether the post needs attention. Post replacement starts around $450-$750 per post when we’re digging, setting, and bracing in black clay. Rail repair on a steel pipe pasture gate usually falls between $150-$400, depending on how many welds are cracked. Custom welding jobs are quoted by the hour at $95-$135 per hour plus materials, and most small fabrications run two to four hours. The price is quoted and agreed before any work starts. It won’t change at the door. We also knock $40 off any repair over $200, and there’s no trip charge inside the county.
We Also Serve Cities Near Copper Canyon
We’re based right here in the Dallas-Fort Worth corridor and run calls into Copper Canyon regularly, along with Copper Canyon neighbors in Denton, Argyle, Flower Mound, and Little Elm. Same crew, same welder in the truck, same promise on every job.
Serving Copper Canyon, TX - Our Local Coverage Area
We’re based in the Copper Canyon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Copper Canyon
Because the post is moving, not the hinge. Copper Canyon’s black clay expands and contracts enough to shift a gate post out of plumb over a few seasons, and once it’s leaning, every weld you put on that post is fighting the gate’s full weight at an angle. The fix is to reset or brace the post first, then weld the hinge. If someone keeps welding new hinges onto a moving post, you’ll keep calling someone back. Call (940) 394-8744 and we’ll check the post before we burn a single weld.
Yes. Most cracked pipe welds can be done with the gate still hanging, so the fence line stays closed the whole time. We grind the crack clean, weld it, and add a gusset or reinforcement if the pipe has been hit hard enough to bend. Horses stay in, gate stays fixed.
It’s usually both. When the clay under your driveway swells, the track shifts and the gate starts binding, which puts load on the rack screws and strips them. The operator is working fine; it’s the gate frame and track that moved. We realign or re-set the track, then weld new rack sections in place and re-tune the operator. We service Viking units on Copper Canyon estates regularly, so we know exactly what to look for.
Yes. On a shared driveway, we coordinate with both homes and do the post work in a way that keeps at least one entrance open the entire time. Most Copper Canyon shared driveways are wide enough to swing a temporary opening, and we carry the materials to brace a gate while the new post cures. Nobody misses work, school, or a delivery because we’re on the job.
UL 325 is the federal safety standard that requires automatic gates to reverse or stop if they hit a person, pet, or vehicle, and it requires safety sensors like photocells and contact edges on most residential gate systems. If your gate was installed years ago, there’s a real chance it doesn’t meet current standards. We’ll check your sensors, safety edges, and force settings any time we’re on the property for a hinge or weld repair. If something’s out of compliance, we’ll show you exactly what’s wrong and give you a written price to fix it.
Need a gate fixed in Copper Canyon, TX? Call (940) 394-8744 for a free estimate. Hal or one of his crew will answer, tell you if we can get there today, and give you an honest price before any work starts.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Copper Canyon with on-site welding and gate repair.