Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Argyle
Gate motor and opener service in Argyle, TX typically runs $240-$680 for most repairs and $1,400-$4,200 for a full operator replacement, depending on whether you’ve got a LiftMaster slide unit on a 300-foot custom driveway or a lighter swing operator on an ornamental iron entrance. We get to Argyle properties fast because our crews work FM 407 and Crawford Road every week, not once a quarter. When your gate stops halfway or won’t respond to the remote, call (940) 394-8744 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Argyle’s Preferred Gate Motor & Opener Company
Hal Gatewood started this shop in 2001, and the way he runs it hasn’t changed: his name is on the invoice, his phone rings in his pocket, and if something isn’t right, the 90-Day Done Right Promise means one call brings him back. Argyle homeowners tend to appreciate that kind of accountability. You’re not dealing with a faceless rotation of subcontracted techs. You’re dealing with Hal, or one of the background-checked guys he’s trained personally.
Argyle is a specific kind of place. Large-lot estates, horse properties, custom ornamental gates that cost more than some people’s first car. The person who shows up to work on a gate like that needs to understand welding, not just swapping a circuit board. We weld on site, in your driveway, so a cracked hinge post bracket or a sagging frame doesn’t mean hauling your gate to some shop in a different county. It stays where it belongs.
We also answer the phone like humans. No voicemail maze, no “press 2 for existing customers.” If your gate motor died at 11 p.m. and your driveway is now a 400-foot walk in the dark, you get a real person who knows what a failing FAAC actuator sounds like over the phone. That matters in Argyle, where the nearest help can feel far away when a storm rolls through.
Our Gate Motor & Opener Services in Argyle
Motor Repair
Motor repair in Argyle usually means one of three things: a failed actuator on an ornamental swing gate, a burned-out capacitor or gearbox on a slide operator, or a control board that’s been corroding for years inside an unsealed housing. On custom-estate operators from the 2010s, we see a lot of boards that leak current and trip the loop detector randomly, so the gate opens for no reason or won’t close all the way. We diagnose before we quote, and the price you get is the price you pay. No surprises at the door.
Motor Installation
New motor installation on an Argyle property isn’t a drop-in job. These are heavy gates: ornamental iron, sometimes 16 or 18 feet wide, with stone pillars and brick columns on either side. Mounting a new operator means getting the post brackets dead level, setting the travel limits correctly, and making sure the safety photocells and edge sensors actually work. We install LiftMaster, DoorKing, Elite, and other major brands, and we walk you through the remote programming before we leave.
Linear Motor
Linear operators are what you’ll find on most slide gates in Argyle, especially the long driveways off FM 407 where a 300-foot approach doesn’t leave room for a swing. Over time, the chain or belt stretches, the limit switches drift, and the gate starts slamming or stopping short. We service and replace linear motors on all the major slide-gate brands, and we keep common parts stocked so we’re not waiting a week on a ground shipment when your gate is stuck open.
Slide Motor
Slide gates are the workhorse of Argyle’s custom-home and equestrian properties. They handle long runs, uneven grade, and the occasional bump from a trailer. But they also take a beating from Denton County’s clay soil. When the ground shifts, the track heaves, and the motor has to work harder until something gives: a stripped gear, a snapped chain, a burned board. We fix the motor and check the track while we’re there, because fixing one without the other means you’ll call us again in six months.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Argyle
We’re certified to service nine major gate motor brands, including LiftMaster, DoorKing, Elite, Mighty Mule, FAAC, BFT, Linear, Viking, and Ghost Controls. For Argyle customers, that matters because most properties here have at least one LiftMaster slide operator, and plenty have a Mighty Mule or Elite on the back pasture gate. We keep replacement parts in stock for the brands we know Argyle runs, which means faster turnaround when your operator dies on a Friday afternoon and you’ve got horses to feed behind that gate.
Common Gate Motor & Opener Problems We See in Argyle Homes
- Clay soil shifting the posts and binding the gate. Expansive clay in Denton County’s Cross Timbers zone swells in spring and cracks in August. When the hinge posts move even half an inch, the gate sags and the motor strains against the misalignment until it burns out or trips the safety beam.
- Corroded control boards on 2010s slide operators. Humid air gets into unsealed board housings and starts slow corrosion. The gate works fine for months, then starts opening randomly or refusing to close. By the time you notice, the board is usually toast.
- Stuck limit switches after winter freezes. Some post-Uri replacements used non-freeze-rated components. When temps drop, the limit switch sticks and the gate stops halfway, leaving your driveway half-open and your property unsecured.
- Dead batteries in solar operators on long driveways. Argyle has a lot of solar-powered slide gates on properties where running 120V to the gate would have cost thousands. After five or six Texas summers, the batteries stop holding charge and the gate slows to a crawl or won’t move at all.
Pricing for Gate Motor & Opener in Argyle, TX
Argyle’s market runs a little higher than nearby suburban cities because the gates themselves are bigger, heavier, and more custom. A typical motor repair in Argyle lands between $240 and $680, depending on whether it’s a capacitor, a limit switch, or a full actuator. Slide motor replacement on a standard residential gate usually runs $800-$1,600 installed. A complete operator system for a custom ornamental swing gate: $1,400-$4,200, including labor, programming, and safety sensor alignment. Every quote is written, agreed before work starts, and includes the 90-Day Done Right Promise in writing. We don’t change the number at the door. We also offer $40 off any repair over $200, no trip charge inside Denton County, free second opinions on written estimates, and a permanent 10% discount for seniors and veterans. Call (940) 394-8744 for an exact quote on your gate.
One Visit, Two Gates: The Argyle Service Call We Know Best
Argyle is the only Denton County city where a single service visit routinely pairs a LiftMaster slide operator on a 300-foot custom driveway with a 1990s manual pipe swing gate on the same acreage. That’s not a thing in Flower Mound or Lewisville. It is a thing in Argyle. The front gate might be a 2018 solar-powered automatic slide unit with an intercom and camera. The back pasture gate might still be a manual pipe swing on rusted hinges with a drop rod that doesn’t sit square anymore. We quote both on the same call. One trip, one invoice, both gates handled.
On Crawford Road, our tech replaced a failed FAAC 400 actuator on a 2018 solar slide gate, then walked the back pasture to quote rusted hinge-post reinforcement and a drop-rod repair for the manual pipe swing. That’s a normal day for us in Argyle. We understand the dual-gate property because we work those same FM 407 and Crawford Road parcels every week, not once a season.
We Also Serve Cities Near Argyle
Our Gate Motor & Opener crews serve Argyle and the surrounding towns: Flower Mound, Lake Dallas, Denton, and Ponder. If you’re on the edge of Argyle and not sure whether you’re in our service area, call (940) 394-8744 and we’ll tell you straight. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, but the crews working your gate are local to the area.
Serving Argyle, TX - Our Local Coverage Area
We’re based in the Argyle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Argyle
Because the expansive clay under your hinge posts swells and shifts the post out of plumb, which throws the gate out of alignment so it binds against the motor or trips the safety photocell beam. This is a seasonal pattern in Argyle, and the fix is usually resetting the posts, adjusting the hinges, and re-aligning the sensors. Call (940) 394-8744 and we’ll schedule the correction before the next rain cycle.
Yes, we do this regularly in Argyle. Most LiftMaster, DoorKing, and Elite operators can be wired into a new intercom and camera system, though some older boards may need a relay upgrade to handle the new signal. We’ll check compatibility, quote the full integration, and have it working the same day on most setups.
Usually the gearbox or the chain. Clay soil heaves the track, the gate drags, and the motor compensates until the gears strip or the chain breaks. We replace the damaged parts and address the track alignment so it doesn’t happen again. Expect most 2015-era slide operator repairs in Argyle to run $300-$900 depending on the damage.
If you want the gate to work during a power outage, yes. The February 2021 ice storm caught a lot of Argyle properties with operators that had no battery backup, and a heavy ornamental gate is not something you want to muscle open in freezing rain. Battery backup systems for swing gates typically run $350-$750 installed in Argyle. Call us for a quote and we’ll match the right backup to your operator.
On clay soil, every two to four years is common. The wet spring and dry summer cycle in Denton County works on your hinge posts constantly. If your gate is dragging, latching hard, or tripping the safety beam, the sag is already affecting your motor’s lifespan. Correcting it early costs less than replacing a burned-out operator later.
Call Gatewood Fence & Gate for Gate Motor & Opener Work in Argyle
If your gate motor is grinding, your remote stopped working, or your slide gate won’t move off the stop, call (940) 394-8744. We’ll give you a straight answer and a written price before any work starts. Hal Gatewood has been doing this since 2001, and the 90-Day Done Right Promise means you never have to chase us down. For gate service in Argyle, you want someone who knows the difference between a 2018 solar slide operator and a 1990s pipe swing on the same property. We do.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Argyle since 2001.