Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Denton?
A standard residential gate installation in Denton, TX, typically costs between $1,800 and $4,500, depending on the material, automation needs, and site conditions. For basic manual swing gates, you might see prices as low as $900, while complex, automated driveway gates with heavy-duty operators often run upwards of $6,500. We’ve been installing these systems since 2001, and we find that in the Denton market, the biggest variables are usually the condition of your existing posts and the type of motor you choose.
Gate Installation Cost Breakdown (2026)
When you look at a quote, it helps to know what you are actually paying for. We break down our pricing by labor and materials so you know exactly where your money is going. Here are the typical ranges we see across Denton County for professional-grade installations.
| Project Type | Estimated Cost Range |
|---|---|
| Manual Pedestrian Gate (Basic) | $800 - $1,600 |
| Manual Driveway Gate (Single Swing) | $1,500 - $3,200 |
| Automated Driveway Gate (Dual Swing) | $3,500 - $6,500+ |
| Custom Welding & Fabrication | $400 - $1,200 (Add-on) |
| Gate Operator/Motor Only | $1,200 - $2,800 |
These numbers cover the hardware, the labor for setting posts, and the final adjustments to make sure the swing is true. If you are looking for gate installation in Denton, remember that we don’t believe in hidden fees. We provide upfront pricing, and if we find that your existing gate can be saved with on-site welding instead of a full replacement, we will tell you. We would rather earn your trust for the long haul than sell you something you don’t actually need.
What Affects Gate Installation Pricing in Denton?
Every yard in Denton is different. I have been working in this area for 29 years, and I can tell you that the soil composition and the local weather patterns play a bigger role in your gate’s lifespan than most people realize. Here is what actually moves the needle on your final bill:
- Foundation and Post Depth: Denton soil has a lot of clay. If we aren’t digging deep enough past the frost line-or if we don’t use the right concrete mix to account for the shifting ground-your gate will sag within two years. We do not cut corners on post depth, and that labor is part of the installation cost.
- Automation and Access Control: Choosing a reputable operator like LiftMaster or Viking changes the price point significantly. Cheap motors from big-box stores often fail after one season of Texas heat, so we only install equipment we know will last.
- Material Weight: A heavy wrought-iron gate requires much stronger hinges and a more powerful motor than a light aluminum or cedar gate. The hardware needed to support that weight is a major cost factor.
- Site Accessibility: If our truck can pull right up to the driveway, your costs stay lower. If we have to haul materials across a lawn or navigate tight alleys in older parts of town, that adds time and labor.
- Electrical Requirements: If you are installing an automated gate where there is no existing power, we have to run conduit and wire from your house or a separate breaker. This is often the “hidden” cost that surprises homeowners.
How to Save on Gate Installation
The best way to save money on a gate is to avoid having to replace it again in five years. I have seen too many homeowners pay for a cheap “deal” only to call me six months later because the hinges ripped out of the post.
First, consider whether you actually need a full replacement. We specialize in on-site welding. If your gate frame is solid but the hinges are shot, we can fix that in your driveway. We don’t have to haul your gate off to a shop, which saves you the expense of removal and re-installation.
Second, take advantage of our standing offers. We provide a 10% discount for all seniors and veterans. We also offer $40 off any repair over $200. If you have a written estimate from another company, I am happy to provide a free second opinion. Sometimes, that second look can save you thousands by identifying that you don’t need the “full package” they quoted you.
Finally, don’t ignore the small issues. A gate that drags on the concrete is a security risk, but it is also a repairable problem. If you wait until the post is completely leaning over, the repair costs will be much higher. Call us at (940) 394-8744 the moment you notice it dragging.
How We Ensure Quality (The 90-Day Done Right Promise)
I put my name on the shop for a reason. When you hire Gatewood Fence & Gate, you are getting me or my crew-not a subcontractor or a national franchise team that doesn’t know the area. We back every single installation with our 90-Day Done Right Promise. If something isn’t sitting right or the gate isn’t latching perfectly within those first three months, one call brings us back to make it right. No runaround, no “we’ll get to it next week.” If we did the work, we stand by it.
FAQs - Gate Installation Cost
How much does it cost to motorize an existing gate in Denton?
Motorizing an existing gate typically costs between $1,500 and $3,000, depending on the condition of your current gate and what power supply is available nearby. We have to make sure your existing gate is balanced perfectly before adding a motor, or the motor will burn out quickly. Call (940) 394-8744 for an exact quote.
Is it cheaper to repair or replace a gate?
In most cases, repairing a gate is significantly cheaper than replacing it, often costing 40-60% less than a full install. We are a repair-first company; we only recommend replacement if the structural integrity of the gate or the posts is beyond saving. Call (940) 394-8744 to see if we can fix your current gate today.
Can you install a gate at an existing fence line?
Yes, we regularly integrate new gates into existing fence lines, with costs usually ranging from $1,200 to $2,500 for the labor and materials to modify the fence and hang the gate. The difficulty depends on the material of your current fence-wood, iron, or chain link-and whether we need to set new, reinforced posts to handle the gate’s weight.
Do you charge for estimates?
We provide free estimates for gate installations and repairs. Because I have been doing this since 2001, I can usually tell you what is wrong just by looking at a photo or hearing you describe the problem. Call (940) 394-8744 to schedule a time for us to come out.
How long does a new gate installation take?
A standard gate installation usually takes one to two days, depending on whether we need to pour new concrete footings. If we are pouring concrete, we have to let it cure for at least 24 hours before we hang the gate to ensure it stays level. Call (940) 394-8744 to discuss your timeline.
Ready to get your gate fixed or replaced?
You don’t need a corporate pitch or a call center reading from a script. You need a gate that works, installed by someone who knows how to do it right the first time. We are locally owned, owner-operated, and we answer our own phones. If you are ready to stop dealing with a gate that doesn’t close or a fence that looks tired, give us a call at (940) 394-8744. We offer free estimates, no trip charges within the county, and a promise that we will show up when we say we will. Visit our home page to see more about our services and how we handle everything from welding to full automation.
Pricing reflects the Denton market as of 2026. Gatewood Fence & Gate offers free estimates on Gate Installation services - call (940) 394-8744. Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Denton since 2001.
What Our Customers Say
"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth