Linear Gate Repair Nationwide | Gatewood Fence & Gate

Linear Gate Repair in Denton: What to Know First

Linear gate repair in Denton typically costs between $185 and $480 depending on what failed, and most jobs are done the same day we look at the gate. We’re an independent Linear service provider - not a manufacturer-authorized shop - which means we diagnose what’s actually wrong instead of pushing a replacement board because it’s the easy path. If you own a Linear gate in Denton, Argyle, Sanger, or anywhere in the county, call (940) 394-8744 and you’ll get a live person. Not a voicemail, not a menu tree, not a call center. Hal Gatewood has been fixing gates in this town since 2001, and he knows which Linear weak points show up in Denton’s clay-heavy, freeze-thaw winters.

Call (940) 394-8744

How Linear Products Fail - and How We Fix Them

Linear makes solid equipment, but every brand has its patterns. Here’s what we see on Linear jobs in Denton, model line by model line.

• Linear LRA actuators (pull-to-open swing gates): travel limits drift with temperature swings. Denton nights dip below freezing in winter and push 100 in August, and that range makes the limit switches creep. We see gates that open fine at noon and stop two feet short at midnight. Fix: reset the limits, then torque the travel nuts and verify the leaf holds position across a full cycle. If the actuator has hydraulic fluid, we check it too.
• Linear VS series swing arm operators: the phenolic gear strips when the hinge post sags. This is the one that drives me up a wall, because it’s usually not the motor’s fault. A heavy gate hanging on a post that has settled in Denton clay drags at the closing arc. That drag loads the gear until it carves itself smooth. We fix the post, then replace the gear - never the other way around.
• Linear APeX control boards: capacitor failures after surge events. Denton gets real storm season spikes. The first thing that fails on a linear board after lightning arcs nearby is the controller capacitor. Symptom: gate opens, but won’t close, or the display flickers. We replace the capacitor or the board and recommend a surge protector so it doesn’t happen again in June.
• Linear MDR/UL remote receivers: failed antenna connections from moisture intrusion. The receiver box sits in the weather year-round here. Condensation gets into the antenna fitting, the signal fades, and suddenly you’re standing in the driveway clicking a remote at a gate that ignores you. We dry out the enclosure, reseal the connections, and replace the receiver if the board has corroded.
• Linear Allstar 9920/9930 slide operators: the photo eye alignment gets rattled loose by gravel driveways. Denton’s rural side has miles of caliche and crushed rock. The vibration from daily traffic on those drives knocks the safety photo eyes off alignment, and the gate then refuses to move because it thinks something is in the way. Fix: set the eyes back square and secure them with fresh hardware, then confirm the beam is clean.

Our Linear Gate Repair Process

Here’s what actually happens when you call us about a Linear gate in Denton, step by step.

1. 1
   You call, a person answers. We ask what the gate is doing - or not doing. We’ll get a handful of details, then give you a straight answer on whether it’s likely something quick or worth setting an hour aside.
2. 2
   We show up on time, at the address you gave us. No four-hour windows. We tell you before we drive over when we’ll be there, and we roll in when we said we would.
3. 3
   We diagnose the actual failure. Hal or one of his crew tests the operator, the limits, the photo eyes, the hinge posts, the panel alignment, and the wiring from the board out. We look for the root cause, not the first broken-looking part.
4. 4
   We show you the failed part and give you a price before touching a wrench. You know what it costs and what we’re replacing. OEM Linear part or quality aftermarket - we tell you the difference and let you choose. Every quote is agreed before any work starts, in writing.
5. 5
   We fix the gate right there in your driveway. We carry the common components on the truck and we weld on site, so the gate stays where it belongs - not hauled off to some shop.
6. 6
   We test the full cycle, then hand you the 90-Day Done Right Promise in writing. If it’s not right within 90 days, one call brings us back. No runaround, no fine print.

What Linear Gate Repair Costs in Denton

Straight numbers, because the second thing every homeowner wants to know after “what’s wrong” is “what will I pay.” Here are the common scenarios we see on Linear gates around Denton:

• Phot eye realignment or replacement: $95-$190
• Limit switch adjustment or replacement: $120-$220
• Remote or receiver reprogramming: $75-$140
• Weld repair on a sagging gate panel or hinge: $150-$350, depending on how many welds and how much grinding is involved
• Hinge post straightening or reset in concrete: $220-$480 - this one depends on whether the post has to be pulled and re-poured
• Full control board replacement (APeX or Allstar): $240-$520 including labor, depending on the board generation

What moves the price? Age of the operator, whether the failure is electrical or structural, and whether the failed part is still available OEM or requires an aftermarket equivalent. You’ll always know the number before we start. Estimates are free, and if you have a written estimate from another company, bring it - we’ll give you a second opinion at no charge.

Why Denton Homeowners Call Gatewood Fence & Gate for Linear Work

We’ve been doing this in Denton since 2001, which means we’ve seen every Linear generation from the early Allstar slides to the current VS swing arms. We repair first and replace later, and we do it with on-site welding instead of loading your gate onto a flatbed. The 90-Day Done Right Promise is printed on every invoice - if it’s not right, we come back. And if your Linear opener has finally gone past saving, we also service LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, so you’re not starting from scratch with a stranger. Hal Gatewood’s name is on the shop and the shop is right here, not three states away. That’s the whole warranty in one sentence.

FAQs