Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterBFT Gate Parts & Welding in Denton: What to Know First
BFT gate parts and welding in Denton is work we do every week - hinge replacements, post repairs, cracked rail welds, and roller swaps on BFT swing and slide systems. Most BFT part repairs run $180 to $600 depending on whether we’re replacing a hinge or rebuilding a post, and we can usually get your gate moving again within a day or two of the first call. The price is quoted and agreed before any work starts, and we weld on site in your driveway rather than hauling the gate off. If you own a BFT opener or gate in Denton and it’s sagging, grinding, or not latching, call (940) 394-8744 and a live person answers. This page is for homeowners who want the straight answer on BFT parts, what fails, what it costs, and who around here actually fixes it right.
How BFT Products Fail - and How We Fix Them
BFT builds solid gate operators, but the metal around them takes a beating in North Texas. Here’s what we see on BFT jobs in Denton, and what we do about it.
- Hinge weld fatigue on BFT swing gates (Icaro, Rigel, Phobos lines). The gate post carries all the weight, and the hinge plate is usually the first thing to crack at the weld line. We see this constantly on heavier BFT swing gates, especially ones with solid steel panels. The fix starts at the post, not the middle of the gate - we grind out the old weld, re-weld the hinge plate with proper penetration, and brace the post if it’s shifted.
- Sagging gate leaf on BFT Deimos and Phobos models. A gate sags in the hinge post, not in the middle. When a BFT gate starts dragging at the latch side, the post has usually leaned or the hinge barrel has worn oval. We replace the hinge with an OEM-spec part or a heavier aftermarket hinge, re-shim the post, and weld it square. Fix the panel without the post and you’ll fix it twice.
- Rail cracks on BFT slide gates (Thalia, Nica, Kubo lines). Long slide gates flex, and BFT rails crack at the stress point where the gate frame meets the roller track. We weld the crack, fishplate the weak section, and check the roller alignment so it doesn’t crack again two inches over. Just welding over the crack without addressing the roller height means you’ll be calling us back for the same repair.
- Roller and track wear on BFT sliding gates. Denton’s clay soil and the freeze-thaw cycle we get every winter push gate posts around, and that misalignment eats rollers. BFT slide gates are no exception. We check the roller spacing, the track level, and the post anchors, then replace what’s actually worn instead of selling you a new track you don’t need.
- Latch and lock misalignment after a BFT actuator replacement. When a BFT motor gets swapped, the gate’s travel limits usually change by a half inch or so, and the latch misses the catch. We see this a lot after DIY motor installs or work done by someone who didn’t re-set the limit switches. We dial in the BFT limit settings, realign the latch, and weld the catch plate where it belongs.
Our BFT Gate Parts & Welding Process
Here’s how a BFT parts or welding job goes when you call Gatewood Fence & Gate:
- 1
You call (940) 394-8744. A live person answers, day or night. You describe the gate problem - sagging, grinding, won’t close, roller off the track - and we schedule a time that actually works for you.
- 2
We show up and look. Hal or one of his crew checks the BFT gate in person: hinge play, post lean, rail condition, roller wear, and the operator’s limit settings. We tell you exactly what we found and what needs fixing.
- 3
We quote the repair before any work starts. You get a written price for parts and labor. OEM BFT parts if warranty or fit demands it, quality aftermarket parts when they’re the better value. No surprises at the door.
- 4
The work happens in your driveway. If welding is needed, we weld on site - grinding, fitting, welding, and finishing the repair without hauling your gate to a shop. You see every step.
- 5
We test the gate through full cycles. We run the BFT opener, check the limits, and make sure the gate opens, closes, and latches the way it should.
- 6
You get the 90-Day Done Right Promise in writing. If something’s not right within 90 days, one call brings us back. That’s the whole promise.
What BFT Gate Parts & Welding Costs in Denton
Here’s what BFT gate parts and welding typically run in Denton, based on jobs we’ve done across town:
- Hinge replacement (per hinge): $180 - $340, including grinding out the old weld and re-welding the new hinge.
- Post repair or reinforcement: $220 - $500, depending on whether the post needs straightening, re-anchoring, or a full replacement sleeve.
- Rail crack weld and fishplate: $150 - $300, including grinding, welding, and the reinforcing plate.
- Roller replacement (set): $120 - $280 for BFT slide gates, depending on roller type and track condition.
- Latch and lock realignment: $90 - $180, including any catch plate re-welding.
The main thing that moves the price is post condition. If the post has shifted in the ground, we fix that first - welding a hinge onto a leaning post just means doing the job twice. Every quote is free and agreed before we touch the gate. Call (940) 394-8744 for an exact number on your BFT gate.
Why Denton Homeowners Call Gatewood Fence & Gate for BFT Work
We’ve been fixing gates in Denton since 2001, and Hal Gatewood’s name is on the shop and on every invoice. That’s the oldest accountability there is - you can drive to the shop and look him in the eye if something’s not right. We weld on site so your gate stays in your driveway, and every job carries the 90-Day Done Right Promise in writing, not buried in fine print. If you’ve got a BFT opener and it’s acting up, we know those systems - Icaro, Phobos, Deimos, Thalia, the lot. And if you’ve got another brand on the property, LiftMaster, Mighty Mule, Ghost Controls, or DoorKing, we service those too. No trip charge inside the county, $40 off any repair over $200, and a free second opinion on any written estimate. Leave your gate better than we found it - anything less and we haven’t done our job.
FAQs
Yes - we order OEM BFT parts directly through parts distributors, and we can usually have them in hand within a few business days. For common wear items like hinges and rollers, we often stock quality aftermarket equivalents that meet or exceed the original spec. As an independent BFT service provider, we’re not tied to a manufacturer’s parts pipeline, so we recommend what’s actually best for your gate, not what’s easiest to order. Call (940) 394-8744 and we’ll tell you what your gate needs and what the parts run.
We weld on site, in your driveway, every time. The gate stays on its hinges or on its track while we grind, fit, and weld. Hauling a gate to a shop means re-hanging it, re-setting the limits, and usually introducing new alignment problems - it’s slower and it costs more. On-site welding is the whole point of what we do.
Welding on the gate frame itself - hinges, rails, latch plates - doesn’t touch the BFT opener’s electronics, so it won’t void the motor warranty. What does void warranties is welding near the control board, the actuator, or the limit switch housing without disconnecting the power and protecting the electronics. We take care of that every time: we isolate the operator before welding anywhere near it. If your BFT opener is still under warranty, we’ll tell you what’s safe and what to watch.
Most BFT part repairs in Denton - hinges, rollers, latches, rail welds - are done within a day or two of the first call. If your gate is stuck open and it’s a security issue, tell us when you call and we’ll prioritize it. We answer the phone around the clock, and we’ll give you a straight answer on timing before you hang up. Call (940) 394-8744.
If the posts are solid and the panel metal is still sound, repair almost always wins. We’ve brought gates back that other companies quoted for full replacement - new hinges, a rail weld, fresh rollers, and the gate runs another ten years. We replace a gate when the post bases are rusted through underground or the panel metal is too thin to weld safely. Hal will tell you which one you’ve got, and he’ll tell you straight.
Yes. We service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you’ve got a BFT gate at the front and a Ghost Controls opener on the back gate, we handle both in the same trip. One call, one bill, both gates working.
Written by Hal Gatewood, Owner, Gatewood Fence & Gate, serving Denton and nearby areas.