Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Corinth
Gate access control in Corinth, TX runs between $450 and $2,800 for most residential systems, with keypads on the lower end and multi-home video intercom entry on the higher end. You’ll get a straight quote before we touch anything, and we answer the phone around the clock at (940) 394-8744. We started working in Corinth back when most of these subdivisions were still going up, and we know the soil, the HOAs, and the hardware that holds up out here. If your gate opener is acting up, call us before you replace it. More often than not, the fix is smaller and cheaper than a whole new system.
Why Gatewood Fence & Gate Is Corinth’s Preferred Gate Access Control Company
Hal Gatewood put his name on this shop in 2001, and the address is published. People in Corinth don’t need a gate company that sends a different face every time. They want the same person showing up, the one who remembers that the Shady Shores entry gate has that weird loop detector quirk from 2019. Our Gate Access Control team works the Corinth area every week, so we know which subdivisions require architectural review and which ones just want the gate working again before the school bus comes. Corinth homeowners call us because the number reaches a live person at two in the morning, not a phone tree. And every job, from a single keypad swap to a full entry system rebuild, carries the 90-Day Done Right Promise in writing. It’s simple: if it’s not done right, Hal comes back and makes it right. No runaround, no arguing about who caused what.
We’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The crew is background-checked and uniformed. And because Hal is owner-operated, he’ll tell you straight if something just needs a weld instead of a whole new operator. That’s the way he’s done it for 29 years in North Texas.
Our Gate Access Control Services in Corinth
Keypad Entry in Corinth
A wired or wireless keypad at the driveway is the most common access control setup we install for Corinth single-family homes. In HOA-governed communities like Forest Hills or Corinthian Point, most boards want the keypad finish to match the existing gate hardware. Black and bronze powder-coat are what we stock, and we’ll verify the approved finish before ordering if your subsection has stricter standards. Typical keypad replacement or new install runs $450 to $900, depending on whether we’re pulling new wire from the operator to the pedestal. If your keypad’s buttons are worn slick from years of Texas sun, the fix is usually a new faceplate and membrane, not a whole new board.
Remote Control Upgrades
Multi-button remotes and adding new remotes to an existing Corinth gate are quick work. Most systems in town are LiftMaster or Linear, and we keep those remotes in the van. If you’ve got a community entry gate shared by several homes, we can program individual remote codes so one neighbor’s clicker doesn’t open another neighbor’s driveway. That’s a common headache in gated sections of Oakmont and The Oaks at Corinth, and it’s fixable in about an hour. Figure $150 to $350 for most remote programming and replacement jobs.
Phone Entry Systems
Phone entry is what most small HOAs in Corinth ask for when they want to stop replacing lost remotes. The system calls a resident’s cell phone when a visitor presses the call button, and the resident dials a digit to open the gate. For duplex gate entries or small shared courts, this beats handing out sixteen clickers. These jobs run $800 to $1,400 installed, and we handle the phone line or cellular adaptor too. Corinth’s clay soil matters here because the call pedestal sits out at the gate post, and a shallow-set pedestal will lean within two years. We set pedestals on deep footings and seal the conduit against groundwater. It costs a little more up front, and it means you’re not calling us every spring to straighten a leaning call box.
Card Reader Installations
Card readers show up on Corinth gates where a management company handles access for a rental community or a larger subdivision entry. Proximity cards, fobs, or HID-style readers get programmed with the property manager’s access list, and we do the trenching and conduit to tie it back to the operator. Most card reader installs in Corinth run $600 to $1,200 depending on how far the conduit has to run and whether there’s existing low-voltage in the ground. If the property has a WiFi signal at the gate, we can set up remote card enrollment so the manager can add and remove cards without a service call. That’s worth asking about if your HOA is tired of paying for every new resident’s fob programming.
We also do video intercoms and smart access upgrades, and those are growing fast in Corinth’s newer sections around Lake Sharon and the developments off Swisher Road. A video intercom with a camera and two-way talk runs $1,400 to $2,400 installed, and smart access tied to a phone app adds $300 to $700 depending on the operator brand. These systems work fine with BFT, Viking, and LiftMaster openers, and we’ll tell you honestly which one fits your gate without trying to sell you the most expensive option.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Corinth
We service and install BFT, Linear, Viking, Ghost Controls, LiftMaster, FAAC, DoorKing, Elite, and Mighty Mule. For Corinth customers, we keep common parts in the van: LiftMaster control boards, BFT remotes, Linear receiver modules, Viking loop detectors, and Ghost Controls arms. That means a lot of Corinth gate access repairs are same-day because we’re not waiting on a part from a distribution warehouse. With the heat and the clay shifting things around, a Viking or Linear system that’s been in the ground since the mid-2000s is usually one worn limit switch or a cracked capacitor away from working again. We’d rather swap that part and get you back in business than sell you a new $2,500 operator you don’t need.
Common Gate Access Control Problems We See in Corinth Homes
- Gate won’t open after a heavy rain. Corinth’s expansive clay swells when it’s wet, and overnight or over a weekend that’s enough to shift a loop detector out of alignment. The gate thinks something’s sitting on the loop, so it ignores your remote and keypad. We come out, relevel the loop, and it’s good.
- Gate reverses and refuses to close on summer afternoons. When it’s 100°F out, the metal on a swing gate expands. The safety photocell on one post shifts just enough that the beam breaks, and the gate thinks a child is in the way. That’s why it opens fine in the morning and fights you at 3 p.m.
- The HOA sent a notice about a mismatched keypad or pedestal. Several Corinth subdivisions have deed restrictions on finish color, pedestal height, and even where the keypad can sit. A national outfit that slaps on a white plastic box where the board wanted black powder-coat means a mandatory redo and a second bill. We ask which subdivision you’re in before we order anything.
- February 2021-style ice damage. That freeze snapped weld beads on slide gate racks all over Corinth, and the bent rack stripped the operator’s pinion gear. If your gate made a grinding noise and quit after an ice storm, that’s the likely culprit. Hal welds the rack back true on the spot and replaces the gear, usually the same day.
Pricing for Gate Access Control in Corinth, TX
Here’s what Corinth residents can expect for gate access work, before any discounts:
- Keypad replacement or new keypad install: $450-$900
- Remote programming and replacement: $150-$350
- Phone entry system: $800-$1,400
- Card reader system: $600-$1,200
- Video intercom with camera: $1,400-$2,400
- Smart access retrofit: $300-$700 added to an existing system
- Post reset with 36-inch belled footing: $500-$900 per post, depending on gate weight
We give you the number before any work starts, and that’s the number on the invoice. Period. You’re not financing our fuel, and you’re not paying for a surprise part we should’ve seen coming. Seneca and veteran discounts run 10% off, home county calls don’t pay a trip charge, and any repair over $200 takes $40 off. The estimate is free. Call us and we’ll come look at the gate, tell you what it needs, and write it down.
Here’s the thing about Corinth soil that you won’t hear from a website selling you a kit: the black clay here swells and contracts hard enough that a gate operator bolted to a standard 18-inch footing can shift out of plumb within two years. That’s not a maybe. We see it on gates all over the city, from Corinth Parkway down to the older lots off Post Oak. Our reset standard in Corinth is a 36-inch deep, belled-bottom concrete footing with rebar, because that’s what it takes to survive the dry-wet cycle without the gate binding against the latch post a season later. Nearby towns on sandier soil can get away with less. Corinth can’t. If a gate company quotes you a cheap post reset without asking which way the gate leans after a rain, that’s your warning sign.
And the HOA layer is real. Several Corinth communities, especially the guard-gated and deed-restricted sections, require architectural approval before a new keypad, pedestal, intercom panel, or even a different finish color gets installed. A local crew that works those neighborhoods knows the submission process and can coordinate with your management company. Our crew recently reset a swinging wrought-iron driveway gate in Shady Shores after the hinge post leaned a full two inches off vertical. We excavated to reveal a cracked, undersized post footing, poured a new 36-inch belled concrete footing with rebar, then reinstalled a LiftMaster operator and recalibrated the loop detector. The HOA’s architectural committee approved the new black powder-coat finish before we closed out the job. That coordination is what keeps you from paying for the repair twice: once to fix the gate, once to fix the violation notice.
We Also Serve Cities Near Corinth
Our Gate Access Control in Corinth crew also covers Denton, Argyle, Flower Mound, and Little Elm. If you’re on the west side of town near I-35E or toward the lake, you’re still in our regular service area. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and the crews drive straight to your gate, not the other way around.
Serving Corinth, TX - Our Local Coverage Area
We’re based in the Corinth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Corinth
In most of Corinth’s deed-restricted subdivisions, the answer is no for a like-for-like keypad replacement in the same finish and location. But if you’re changing the finish, mounting a new pedestal, or adding a call box where one didn’t exist, the HOA may require architectural committee review first. We’ll ask which subdivision you’re in and check before we order the part. If your HOA is strict, knowing that up front saves you a violation notice and a redo. Call (940) 394-8744 and we’ll help you sort out what your board needs.
That’s the Corinth clay at work. After heavy rain the ground swells and shifts the loop detector or the gate post just enough to break the safety signal. The gate’s controller reads that as an obstruction, so it will open but not close. It’s a common problem on nearly every subdivision gate in Corinth, and the fix is usually a loop realignment or a small post adjustment. Call us and we’ll get it closing again.
Yes. A video intercom with a phone app lets each resident answer the gate camera, see who’s there, and open from their phone. For shared neighborhood entries, we set up individual user accounts so the app rings all or select residents. These systems run on WiFi or a cellular connection, and we can usually retrofit them to an existing LiftMaster, Linear, or Viking operator without replacing it. Expect $1,400 to $2,400 for most Corinth installs.
It’s almost always a post problem. The black clay under the hinge post dries and cracks in the Corinth summer heat, the post shifts out of vertical, and the gate settles at the latch side. Tightening hinges doesn’t fix it, and replacing the panel only buys you a season. The real repair is a post reset with a deep belled footing, which is what we do. If you’re seeing the same sag every June, call us before the gate drags hard enough to burn out the operator.
Solar openers don’t die from heat alone, but Corinth’s summer sun and occasional ice storms are hard on the batteries and the small arm motors. A flooded lead-acid battery in a solar box can cook in the heat and fail in three years, where a wired operator might run for ten. Solar also fights you when the gate is heavy, like a long wrought-iron swing gate on a clay-heaved post. For most Corinth driveways, a wired operator with a battery backup is the better long-term bet. We’ll tell you straight after looking at your gate, your sun exposure, and your panel.
The bottom line on gate access control in Corinth: the soil moves, the summers are brutal, and the HOA has opinions. That’s not a problem. That’s just how it works here, and Hal’s been working it since 2001. If your keypad is dead, your gate won’t close, or your HOA sent a letter that has you tempted to replace everything, call (940) 394-8744 first. The estimate is free, the quote is the price, and the 90-Day Done Right Promise is in writing. Hal’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Corinth since 2001.