Electric Gate Repair in Denton, TX

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Electric Gate Repair in Denton, TX

Our Gate Repair services in Denton usually cost between $150 and $450, depending on whether the issue is a simple sensor adjustment, a control board failure, or a mechanical obstruction in the gate arm. We offer same-day diagnostics for Denton homeowners, and since we are locally based, we don’t charge a trip fee for calls within the county. If your gate is stuck open, won’t respond to the remote, or is making a grinding noise, call us at (940) 394-8744 to get a live person on the line who can actually help.

When an electric gate stops working, it is more than just an inconvenience; it is a security risk for your property. We have been fixing these systems since 2001, and we have seen exactly how the Denton climate-our humid springs and scorching summer heat-wreaks havoc on circuit boards and gate motors. Unlike national companies that send out a general handyman, we specialize in gate systems. If your gate is acting up, you need someone who understands the specific wiring and mechanical demands of brands like DoorKing or Mighty Mule. We handle the Gate Repair in Denton that others walk away from, including on-site welding to fix broken hinges or bent frames without hauling your gate off to a shop.

When You Need Electric Gate Repair

You don’t always need a full replacement when your gate acts up. Often, the issue is a specific component that has worn out or lost its calibration. If you notice any of the following, give us a call before the problem gets worse:

• The gate reverses before closing: This is almost always a safety sensor issue. In Denton, spiders and debris love to build nests inside these sensors, which confuses the beam and forces the gate to reverse. We can clear the obstruction and realign the eyes in minutes.
• Grinding or scraping noises: If you hear metal on metal, stop using the opener immediately. This usually indicates that a gear in the motor assembly has stripped or that the gate has sagged, causing it to drag on the concrete. We can often replace just the gear rather than the entire motor.
• Gate stuck in the open position: This is a major security concern. If the gate won’t close, it might be a power supply issue or a failed limit switch. We check the power, the battery backup, and the limit settings to find the exact point of failure.
• Remote or keypad unresponsiveness: If your gate works manually but ignores your remote or keypad, the issue is likely in the receiver or the control board. We test the signal strength and the board’s logic to see if it’s a simple pairing issue or a fried circuit.
• Slow or jerky movement: When a gate moves like it’s struggling, it’s usually fighting against friction. We inspect the rollers, the tracks, and the hinges for rust or lack of lubrication. A little bit of maintenance often saves a motor from burning out entirely.

If you see these signs, don’t force the gate. Forcing a motor to fight against a physical obstruction will burn out the capacitor or strip the drive gears, turning a small, inexpensive repair into a major replacement job. Call (940) 394-8744 and let us take a look.

Our Electric Gate Repair Process

We believe in fixing the problem right the first time, which is why we don’t just swap out parts until the gate works. This includes precise Gate Realignment when your gate has shifted off its track. We diagnose the root cause so you aren’t paying for the same repair twice. Here is how we handle your gate:

1. On-Site Assessment: We come to your property in Denton and inspect the entire system, not just the part that failed. We look at the gate alignment, the motor, the power supply, and the safety features.
2. Troubleshooting the Logic: For brands like Elite or Ghost Controls, we hook up our diagnostic tools to the control board to check for error codes. This tells us if the board is failing or if it’s just a bad sensor or wiring connection.
3. Mechanical Inspection: We check for sagging hinges or track debris. A gate that isn’t level puts immense strain on the motor. If your gate needs welding, we do it right in your driveway so you aren’t left with an open entrance for days.
4. Upfront Pricing: Before we turn a single wrench, we tell you exactly what the repair will cost. No hidden fees, no “diagnostic charges” that disappear if you approve the work, and no surprises.
5. The 90-Day Done Right Promise: We stand behind our work. If we fix it, it stays fixed. If something goes wrong with that specific repair within 90 days, we come back and make it right.

Electric Gate Repair Pricing in Denton

We believe in being transparent about costs. See How Much Does Gate Repair Cost? (2026 Price Guide) - Denton, TX for typical pricing. We don’t have corporate overhead, which means our prices are straightforward and fair for the Denton market. Estimates are always free, and we offer a permanent 10% discount for seniors and veterans. If your repair ends up being over $200, we take an additional $40 off the final bill.

Remember, these are estimates. The final price depends on the specific parts required for your gate model and the extent of the damage. We invite you to call (940) 394-8744 for an exact quote. If you already have a written estimate from another company, show it to us-we offer a free second opinion, and we are often able to fix the gate for less by repairing parts that others would simply replace.

FAQs - Electric Gate Repair

Is it cheaper to repair the gate or replace the motor?

In most cases, repairing the gate is significantly cheaper than replacing the motor, and we always attempt to repair the existing system first. We only recommend a full replacement if the motor is obsolete, the cost of parts exceeds 50% of a new unit, or the underlying structural damage to the gate makes it unsafe to operate. Call (940) 394-8744 and we can give you an honest assessment of whether your gate is worth saving.

Can you fix my gate today?

We prioritize urgent calls, especially if your gate is stuck open and leaves your property unsecured. Because we are a local, owner-operated business serving Denton, we can often clear our schedule to get to you on the same day. If you need Gate Repair Near Me in Denton, TX, we are already here. Give us a call, and we will tell you exactly when we can be at your property.

Do you work on all gate brands?

We are certified and experienced with nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate is a custom build or uses a different system, give us a call anyway-we have been doing this since 2001, and there is a good chance we have serviced a similar system before.

What makes Gatewood Fence & Gate different from other companies?

The difference is accountability. When you call us, you aren’t reaching a dispatch center; you are reaching someone who knows the business. Hal Gatewood’s name is on the shop, and his address is published right here in Denton. We don’t use high-pressure sales tactics, we don’t have hidden trip fees, and we back every single job with our 90-Day Done Right Promise. If it’s not done right, we make it right.

If you are tired of dealing with companies that don’t call back or try to sell you a new gate when you only need a simple repair, call us at (940) 394-8744. We are ready to help you get your gate moving again.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Denton.