Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterDoorKing Gate Repair in Argyle, TX | Gatewood Fence & Gate
We’re Gatewood Fence & Gate, and we provide independent Argyle Gate Repair for DoorKing systems across the area. If your DoorKing operator is acting up, call (940) 394-8744. The one thing that makes our DoorKing work here different: we know exactly what Denton County’s clay soil does to these operators, because we’ve been fixing them in Argyle driveways since 2001. We’re not a national outfit and we don’t sell you a new gate when a $45 limit switch is the actual problem.
Why Argyle Residents Choose Us for DoorKing Service
Hal Gatewood put his name on this shop, and he’s been at it since 2001. If you live in Argyle, that means you’re not calling a faceless company. You’re calling a guy who grew up just off Loop 288 in Denton, learned metalwork and mechanical systems at North Central Texas College, and still takes service calls the way he did twenty years ago: show up, look at the gate, tell you what’s wrong before a wrench comes off the truck. We also have a full DoorKing sales & service operation, so the parts that age out on Argyle gate operators are already on the truck, not “on order.”
We carry OEM DoorKing limit switches, control boards, and gearbox seals for 9150 and 6100 series units. When a ranch property on Crawford Road or FM 407 has a gate that’s down, the last thing you want is a callback for a part that could have been in the truck. Ours is.
Common DoorKing Gate Repair Problems We Solve in Argyle
- 9150-series slide operators that stop short or slam the end stop. This is nearly always limit switch drift, and in Argyle the usual trigger is the gate post heeling over from expansive clay swelling after spring rain. We re-set the limits, re-pin the post base, and get you back on the road.
- 1601/1800 telephone entry boards that quit after a summer lightning strike. FM 407 estate lots have a lot of open sky. A nearby strike can burn the relay contacts on those boards. We keep replacements in stock and can swap the board same-day on most Argyle calls.
- 6100-series swing operators with actuator arm bracket fatigue. When you hang a wide, heavy custom iron gate on a post that has pulled out of plumb, the arm takes all the abuse. We see this on Argyle’s older large-lot homes where the gate has been free-swinging for a season or two before someone notices the bracket is cracked.
- Gearbox oil leaks in 9150 reduction drives after winter freeze-thaw cycles. Units that were never fitted with a heater or freeze-rated seals show their age after a hard winter like February 2021. We’ll replace seals, top off the box, and tell you plainly if the unit needs a heater in this climate.
- Safety sensor drift that causes phantom reversals. When clay soil heaves and settles, the loop detector or photo eye can read the ground as a vehicle. On a driveway that runs 200 to 400 feet like many in Argyle, that means the gate stops halfway, reverses, or just flat-out refuses to close.
DoorKing Service in Argyle: What Local Conditions Mean for Your Equipment
Argyle is Denton County’s equestrian and large-lot estate community. That’s not a real estate brochure phrase. It’s an operational reality for gate repair. A single property off Crawford Road or FM 407 might need Gate Installation in Argyle for an automatic DoorKing slide gate at the road, and 300 feet back, a manual pipe-rail pasture gate on hinges that have been rusting since the early 2000s. That dual-gate pattern means a technician here has to know a 9150’s limit switch logic and a drop-rod hinge’s wear pattern without blinking. Meanwhile, the 2010s-era operators installed during Argyle’s building boom are now hitting the age where control boards fail and actuators bind. The clay in the Cross Timbers transition zone swells hard in a wet spring and cracks open in a dry summer. Posts move. Gates sag. Operators drift. We’ve been tracking exactly which DoorKing components fail and when, on this specific soil, for years. The manufacturer’s manual does not have a chapter on that.
DoorKing Models & Products We Service in Argyle
We work on DoorKing 9150-series slide gate operators, 6100 and 6200-series swing gate operators, the 6004 single-swing unit, and the 1601 and 1800-series telephone entry systems. When it comes to parts, we don’t play games. Electronic and safety-critical parts, we use OEM DoorKing. For aged non-electronic hardware like chains, sprockets, or roller trucks, we’ll quote a quality aftermarket equivalent that matches OEM spec and costs less. And if a 9150 from the 2010s has both a cracked gearbox housing and a fried main board, we’ll put the repair number and the replacement number side by side and let you decide.
DoorKing Service Pricing in Argyle
Most DoorKing service calls in Argyle run $95 to $180, and most repairs land between $150 and $400. Figure $250 to $850 for a control board replacement, $500 to $1,400 for a full operator replacement, and $60 to $120 per hour if the job needs extra hands. We offer no trip charge inside the county and $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. The price is quoted and agreed before any work starts. Not after. That’s how Hal runs this shop. If you want an exact number for your gate, call (940) 394-8744 and a live person will pick up, day or night.
Key Takeaways:
- Independent DoorKing service, not manufacturer-affiliated or authorized.
- OEM parts in stock for the failures we actually see in Argyle.
- Upfront pricing agreed before work starts. No gate keeping you guessing.
- One trip can cover both the road gate and the back pasture gate.
Serving Argyle, TX - Our Local Coverage Area
We’re based in the Argyle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - DoorKing Gate Repair in Argyle
It’s almost always a limit switch that’s drifted and a loop detector that’s reading the waterlogged ground as a vehicle after a wet season. We saw exactly this last May on a property off Crawford Road: the gate would open four feet and reverse. The right-limit switch had drifted after the post heeled over from spring clay swell. We re-set the limit, re-pinned the post base, and swapped the loop detector to a freeze-rated housing. The gate has cycled clean through two wet-dry soil cycles since. Call (940) 394-8744 if yours is doing the same.
Yes. We install and service the 1601 and 1800-series telephone entry systems on both new and existing DoorKing operators. The usual job is tying the phone entry into a slide operator at the road while a manual pasture gate gets a hinge replacement the same trip. You don’t need an authorized dealer for that. You need a technician who has done it a hundred times in this county.
On a 6100-series swing operator, the usual damage is actuator arm bracket fatigue, a stressed gearbox, or a post that’s out of plumb and putting lateral load on the arm. The February 2021 storm froze the ground hard, then the thaw left clay swollen and uneven. Gates that were marginal before went further out. We check the post first, then the arm, then the gearbox. We do not just replace the motor and hope.
We do it on the same call. Argyle properties often have an automatic slide gate at the road and a manual pipe-rail gate 300 feet back. We’ll quote a 9150 limit switch repair and a hinge replacement for the second gate in one trip. That dual-gate service pattern is something you won’t get from a company that only looks at the first gate in the driveway. Call (940) 394-8744 for a free estimate before you make two appointments.
Yes, depending on the model and condition of your 9150. A belt conversion quiets the operation and is a good option when the gate runs close to the house. We’ll look at the sprocket, the rail, and the roller trucks before we quote it, because sometimes the noise is a worn truck, not the chain. We’ll tell you straight which one it is, and the price is agreed before we start.
Service Areas Near Argyle
We serve Argyle and the surrounding communities, including DoorKing service in Flower Mound, DoorKing service in Denton, plus Little Elm, Krum, and Corinth. If you’re in the Argyle area, check our Argyle service area page for coverage details. If you’re on the edge, call us and we’ll tell you straight if we can get there.
Book Your DoorKing Service in Argyle Today
Call (940) 394-8744. A live person answers, 24/7. We’ll get a tech to your Argyle gate, quote the job before any work begins, and stand behind it with the 90-Day Done Right Promise. Leave your gate better than we found it, anything less and we haven’t done our job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Argyle since 2001.