Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Flower Mound
If you live in Flower Mound and your ornamental iron driveway gate is sagging, dragging, or pulling loose at the hinges, the fix usually comes down to two things: getting the post re-set straight and getting the welds done right the first time. That’s the work we do every week in Flower Mound neighborhoods like Wellington, The Preserve, and Lakeside. We’re Gatewood Fence & Gate, and we’ve been repairing gates since 2001. Call Hal directly at (940) 394-8744 and he’ll tell you whether the gate can be welded in your driveway or whether the post needs to be re-set before the panel goes back on. Most Flower Mound calls get scheduled the same week, and the price is agreed on before we ever strike an arc.
Why Gatewood Fence & Gate Is Flower Mound’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001, and he still answers the phone himself. That matters in Flower Mound, where a lot of the gate work we do is on HOA-governed properties with architectural rules about finish, height, and style. When a welded repair has to match the original black satin powder coat on a 20-year-old ornamental gate, we match it. We don’t swap the whole panel because one hinge failed. We cut out the bad weld, prep the steel, and lay a new bead that disappears under the finish.
Our customers in Flower Mound call us back because the person who shows up is the same person who quoted the job, and because every repair carries our 90-Day Done Right Promise in writing. If the weld cracks or the hinge shifts within 90 days, we come back and make it right. No runaround. No dispatch queue. One call brings Hal back to your driveway.
We also know Flower Mound’s ground. The Blackland Prairie clay under this town moves more than most people realize, and it moves your gate posts with it. A gate that was perfectly square in March can be dragging by June. That’s not a gate problem; it’s a post problem, and we fix posts as often as we fix panels.
Our Gate Parts & Welding Services in Flower Mound
Hinge Replacement
Hinges on ornamental iron gates in Flower Mound take a beating from two directions: the weight of the panel and the movement of the post underneath it. On 15-to-25-year-old gates, we regularly see hinge barrels worn oval, hinge pins snapped, and weld beads cracked at the post connection. We cut off the old hinge, grind the surface clean, and weld on a new hinge rated for the panel’s weight. If the post has moved, we re-set it first so the new hinge isn’t fighting the same lean that killed the old one.
Post Replacement
Clay heave is the biggest killer of gate posts in Flower Mound. When spring rains soak the soil, the clay swells and lifts posts by fractions of an inch. When summer heat bakes it dry, the clay shrinks and posts settle. Over a few seasons, a hinge post can move two inches out of plumb, and no hinge replacement will fix a gate hung on a crooked post. We excavate the old footer, pour a deeper concrete base, and re-set the post true before re-hanging the gate. In The Preserve subdivision, we recently reset a hinge post that had shifted nearly two inches, causing a 14-foot ornamental gate to drag across a sloped driveway. After a deeper sonotube footer and a re-weld of the hinges to match the HOA’s original black satin finish, the gate swings clean again.
Rail Repair
The horizontal rails on ornamental gates carry the panel’s structure, and they’re usually the first place rust gets a foothold. North Texas freeze-thaw cycles open hairline cracks in old factory welds, water gets in, and the rail rots from the inside out. When we find a compromised rail in Flower Mound, we cut out the bad section and weld in new steel, then grind and finish the joint so it doesn’t stand out from the rest of the rail. On HOA properties where the gate finish is specified in the covenants, we match the repair to the existing color so the architectural committee has nothing to flag.
Custom Welding
Some repairs can’t be done with off-the-shelf parts. When a Flower Mound homeowner needs a custom bracket, a re-fabricated hinge plate, a new pedestrian gate frame, or a steel repair on a gate that was built to match a specific elevation drawing, we weld it on site. Hal brings the welder to your driveway, so your gate never leaves your property. That’s the whole point of Gate Parts & Welding done right: the repair happens where the gate hangs, not in a shop across town.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Flower Mound
We work on gate operators and hardware from Ghost Controls, DoorKing, Elite, and Mighty Mule, among others. If your Flower Mound gate has an operator attached, we check the mechanical side and the opener side together, because a dragging panel kills motors faster than anything else. We keep common parts and hardware on the truck, and anything we need to order for a specialty repair gets quoted with an honest lead time before we start. You won’t get a surprise call saying “the part is in, but the price went up.” The price is set before the work begins.
Common Gate Parts & Welding Problems We See in Flower Mound Homes
- HOA finish mismatches after welded repairs. Flower Mound HOAs are strict about gate finishes. A raw weld left unpainted will get flagged by the architectural committee. We prime and finish every weld to match the existing gate, and on older ornamental iron we’ll match the sheen too, not just the color.
- Clay-driven post heave on sloping driveways. Flower Mound’s terrain rolls more than the flat DFW basin around it. On sloped lots, one post rises while the other sinks, and the gate racks or gaps. Re-leveling both posts is often the only real fix.
- Weld corrosion at hinge points. Freeze-thaw cycles in North Texas put stress on welds at the hinge connection. After 15 to 25 years, those welds fail suddenly. We see it all the time on the original ornamental gates in Flower Mound’s 1990s and 2000s subdivisions.
- Drag marks on driveways. A gate that drags is usually a post problem, not a hinge problem. Fix the panel without the post and you’ll fix it twice. We re-set the post and re-hang the panel so it clears the grade.
Pricing for Gate Parts & Welding in Flower Mound, TX
A typical hinge replacement on a standard ornamental iron gate in Flower Mound runs $180 to $340, depending on the hinge style and whether the post needs re-alignment. Post replacement with a deeper concrete footer runs $450 to $900 per post, including removal, excavation, concrete, and re-hanging the gate. Rail repair and custom welding jobs usually fall between $150 and $600, depending on how much steel we’re cutting out and replacing. Every quote is given before work starts, and it’s honored. If you already have a written estimate from another company, bring it to us for a free second opinion. We also take $40 off any repair over $200, and we don’t charge a trip fee inside the county. Call (940) 394-8744 for your exact number. It’s free, and Hal will give it to you straight.
We Also Serve Cities Near Flower Mound
We work throughout Flower Mound and the surrounding towns, including Argyle, Lake Dallas, Little Elm, and Denton. If you’re outside the city limits, call (940) 394-8744 and we’ll let you know exactly when we can get to your driveway.
Serving Flower Mound, TX - Our Local Coverage Area
We’re based in the Flower Mound area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Flower Mound
It depends on your specific HOA covenants, but most Flower Mound communities with ornamental iron gates require architectural committee approval for any change to the gate’s appearance, including new panels, new finishes, or visible weld repairs. A like-for-like repair that restores the gate to its original condition generally doesn’t need a vote, but if you’re changing the style, height, color, or material, check your covenants first. We’ve done enough work in Flower Mound HOAs to know what typically gets flagged, and we can help you document the repair so the committee sees exactly what was done. Call (940) 394-8744 and we’ll talk it through before you file the paperwork.
It’s the clay. Flower Mound sits on Blackland Prairie clay that swells dramatically when it absorbs spring rain and shrinks when it dries out in summer. That movement shifts your gate posts, and when one post moves more than the other, the gate goes out of square. The fix is to re-set the posts on a deeper, more stable footer. A surface-level adjustment will only last one season. Call (940) 394-8744 and we’ll check both posts and tell you what’s actually moving.
Yes, and that’s what we do most of the time. We cut out the failed weld or worn hinge, re-set the post if it’s moved, and weld on new hardware that brings the panel back to square. The only time we recommend replacing a panel is when the steel itself is rusted through or the panel has been hit hard enough to bend the frame. We’ll tell you honestly which one you’re dealing with. Estimates are free, so call (940) 394-8744.
The hinge-to-post welds and the rail-to-stile joints fail most often. Hinge welds carry the full weight of the panel every time the gate opens and closes, and on a 20-year-old gate, fatigue is expected. Rail joints fail from rust that starts inside the tube and works outward, usually accelerated by North Texas freeze-thaw cycles. We inspect both spots on every Flower Mound gate repair we do. Call (940) 394-8744 for an exact quote on your gate.
Yes, and any licensed gate company should be telling you this. Entrapment protection is required by industry safety standard UL 325 for automated gates, and when you change the gate panel, you’re modifying the system. We’ll check your current operator’s safety edges, photo eyes, and force settings while we’re doing the weldwork, and we’ll let you know if anything needs to be added to keep the system compliant. We don’t leave a gate running on an operator that can’t stop when it should. Call (940) 394-8744 if you need a gate welded and aren’t sure about the safety side of the system.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Flower Mound and the surrounding North Texas communities. Gatewood Fence & Gate is locally owned and owner-operated, with a published address and license number anyone can look up. Every job carries the 90-Day Done Right Promise.